Question about Swiss Legend SL-LUCERNE-ML134AC Wristwatch

Open Question

How to adjust a ceramic swiss legend watch band, how do the pins come out or do they?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

slp11508
  • 43 Answers

SOURCE: Link pins keep falling out on Ceramic Watch

They probably forgot to put the little locking barrel back in before hammering the links shut again. Some watches have the link, the pin, and a barrel that goes in the link before the pin is hammered in. If your watch needs this barrel then the pin will NOT stay in without it, no matter what.

Posted on Jan 05, 2009

  • 19 Answers

SOURCE: remove links from a swiss legend watch band

I'm not exactly sure what type of watch this is, but for 99% of watches out there, this article will help you remove links and adjust the watch. http://hubpages.com/hub/How-to-Size-a-Watch

Good luck!

Posted on May 24, 2010

  • 75 Answers

SOURCE: How do I adjust (remove links) from a woman's

To be on the safe side, I would go to a jeweler. They may show you how to do it. Otherwise, it should not break the bank to make sure it is done well.

I hope this helps.

Posted on Jun 18, 2010

gemineye61
  • 831 Answers

SOURCE: how do I replace the battery in my Swiss Legend ceramic watch

Swiss Legend recommends that your watch be serviced for battery by a local and reputable jeweler in your area. For further advice on batteries, they recommend you contact them.
Email them at support@swisslegend.com or call 1-866-746-7794.
Good luck

Posted on Jul 25, 2010

  • 51 Answers

SOURCE: How do I take links out of a Swiss Legend

Take it to any jewelers and they can do it for a few quid please give thumbs up thanks

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace links on Swiss legend ceramic watch


here is a video that will show you how to remove links on your ceramic watch band

Jan 18, 2013 | Swiss Legend Karamica Chronograph Ceramic...

1 Answer

I have a swiss legend keramica and i cant ajust the bracelet


Most bracelet adjustments require a special tool that is only found in a jewelry store, or your watch can be shortened by the manufacturer. Many watches have pins that push out if you look on the back of the band there should be arrows the pins push in that direction if you have something small enough to fit it the hole, be very careful to put the pin back in the same way. Occasionally some watch bands are not pins they are screws and it can be very difficult to tell the difference between the two. If the watch band has a screw it requires a very small screwdriver and you must be careful NOT to strip the screwhead! You can also shorten some watches by just moving the pin in the band buckle if you have a small tool you should be able to do this yourself, BUT wear glasses because pins will spring out, keep pointed away from your face. Hope this helps!

Sep 13, 2011 | Swiss Legend Karamica Beige Ceramic Watch...

1 Answer

I cannot find an authorized Swiss Legend Repair Center or Retailer in the Pittsburgh, PA area. I need the band sized and no stores that I've been to have had the tool required to take the links out....


Thank you for contacting FixYa.
What kind of stores were you taking too?? If you were going to places like Sears, Walmart etc I can see this, And most retail jewelers.
Honestly, I would look under yellow pages for a watch repair store. They should have most watch tools. I googled and found plenty in your area.
If still no luck then send to Swiss Legend at:
http://www.swisslegend.com/
Best regards. Jewel

Sep 18, 2010 | Swiss Legend Karamica 1.00ct Diamond...

1 Answer

How do I replace the battery in my Swiss Legend ceramic watch


Swiss Legend recommends that your watch be serviced for battery by a local and reputable jeweler in your area. For further advice on batteries, they recommend you contact them.
Email them at support@swisslegend.com or call 1-866-746-7794.
Good luck

Jul 25, 2010 | Swiss Legend SL-LUCERNE-ML134AC Wristwatch

1 Answer

How do I adjust (remove links) from a woman's Swiss Legend ceramic band


To be on the safe side, I would go to a jeweler. They may show you how to do it. Otherwise, it should not break the bank to make sure it is done well.

I hope this helps.

Jun 17, 2010 | Swiss Legend SL-LUCERNE-ML134AC Wristwatch

2 Answers

Remove links from a swiss legend watch band


I'm not exactly sure what type of watch this is, but for 99% of watches out there, this article will help you remove links and adjust the watch. http://hubpages.com/hub/How-to-Size-a-Watch

Good luck!

May 19, 2010 | Watches

1 Answer

Swiss Legend Chronograph Stainless Steel Case- how to change the battery


Take your watch to your nearest watch shop and ask them to do it for you.

You can get into difficulty replacing batteries and it is not worth the risk for the small cost saving in doing it yours

Feb 24, 2010 | Swiss Legend Chronograph Stainless Steel...

1 Answer

How to take links out of the band of a wenger swiss army watch


Save yourself the time and frustration and take it to a reputable watch repair shop and let them adjust your band for you. Could be screws or could be pins! Plus if anything small drops you might not find it again!

Jan 19, 2010 | Swiss Army Wenger Sportedge Bracelet Watch

1 Answer

Link pins keep falling out on Ceramic Watch


They probably forgot to put the little locking barrel back in before hammering the links shut again. Some watches have the link, the pin, and a barrel that goes in the link before the pin is hammered in. If your watch needs this barrel then the pin will NOT stay in without it, no matter what.

Dec 29, 2008 | Swiss Legend SL-LUCERNE-ML134AC Wristwatch

Not finding what you are looking for?
Swiss Legend SL-LUCERNE-ML134AC Wristwatch Logo

Related Topics:

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Swiss Legend Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

ray gallant

Level 3 Expert

43059 Answers

Are you a Swiss Legend Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...