Question about HP LaserJet 4350dtn Printer

Open Question

Hi. I have a hpm 3027x mfp and it wont do double side. the double side column are blanked out. i did take a hard drive and formatter board from another machine in the office and put it on the machine and it worked. therefore I ordered a formatter board and a hard drive and fitted it to the machine and its not fixed it. the machine has up to date firmware. also in the configuration page on the new formatter board it has the duplex option in the paper trays and options column. when you put the new formatter in the machine and print out a configuration sheet this option is not there. if anybody knows about this fault then please get back to me.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 186 Answers

SOURCE: Duplexer problem

First, the machine always prints the first page first. Make sure you have the right driver (4 plus and not 4)and check the settings in the device settings of your printer driver on the pc. Also make sure the duplex unit is for the 4 plus and not the 4.

Posted on Jun 21, 2007

Ad
pagebor
  • 2785 Answers

SOURCE: HP laserjet 5000 series PCL 6 driver

have you tried from the print command dialog box from pc

Posted on Apr 28, 2008

  • 5 Answers

SOURCE: Duplex option is not there.

When you have a P3005n, you probebly see a duplexer unit in the printer, but it will not work, because you haven't P3005dn/P3005X!

Posted on May 22, 2008

joelmar
  • 96 Answers

SOURCE: double side printing issue with HP 2420

Try to default on your page setup.

Posted on Jun 16, 2008

Nikhil Gedam
  • 87 Answers

SOURCE: Laserjet 4250dtn Duplex problem

How is the printer connected.

Please upgrade the firmware of the printer.
Please upgrade the firmware of the printer:
1. Download the firmware file from the following website and extract it.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=412144&prodNameId=412158&swEnvOID=54&swLang=8&mode=2&taskId=135&swItem=lj-25065-13
Expecting that the printer is connected over the network:
=============================================
Remote firmware update by using FTP through a browser
Complete the following steps to update the product firmware by using file transfer protocol (FTP) through a browser.
NOTE: The following instructions can be used on Windows or Macintosh operating systems.
Take note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout.
Open a browser window.
In the address line of the browser, type ftp://<IPADDRESS>, where <IPADDRESS> is the TCP/IP address of the product. For example, if the TCP/IP address is 192.168.0.90, type FTP://192.168.0.90.
Locate the downloaded .RFU file for the product.
Drag and drop the .RFU file onto the PORT1 icon in the browser window.
NOTE: The product automatically restarts the firmware to activate the update. At the end of the update process, the Ready message appears on the control panel.

The following describes how to upgrade firmware in the LaserJet 2400, P3005 and 5200 Series Printers using a USB connection only.
To send the firmware upgrade via USB, you will need to know the name of the computer the printer is connected to, and the printer will need to be shared.
=============================================
=============================================
To find out the name of your computer:
Click the Start button, Programs, Accessories, System Tools, then choose System Information.
You will find your computer’s name in the right window-pane next to System Name.
Write down this name as it will be needed later.
To share the connected printer:
Click the Start button, Settings , then choose Printers ("Printers and Faxes" on WinXP).
Right click on the printer you need to send the upgrade to and then choose Sharing.
On WinXP, if you encounter the following link "If you understand the security risks but want to share printers without running the wizard, click here.", click the link.
Select "Just enable printer sharing" and click OK .
Select Shared As: ("Share this printer" on WinXP) and type a name for the share.
Click Apply and write down the share name as it will be needed later.
To send the firmware upgrade using a USB connection:
Go to a DOS Command Prompt and locate the directory where you saved the firmware file. (To open a Command Prompt inWindows 2000 or XP, go to the Start button, then choose run, then type CMD and hit Enter, in Windows 98 or ME, go to the Start button, Programs, Accessories, then choose MSDOS Prompt). This will bring up a small black screen as displayed below:
If connected to a USB port, Type: copy /b filename \computer nameshare name (for example, copy /b ozfw.rfu \computer1printer).
Press ENTER .
The control panel displays receiving upgrade followed by performing upgrade . The download may take several minutes.
The control panel displays processing job .
The download is complete when the printer reboots and "READY" message is displayed on the control panel.

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help my laserjet m1212nf mfp is showing blank lcd screen no display


Bad memory or a failed formatter are the two mostly likely causes. On the right and side there should be a small panel near the back. open it to see if any additional memory has been added. If the memory slot is empty then the formatter will be the problem.

Sep 14, 2015 | Office Equipment & Supplies

1 Answer

Why is my display screen blank on my Ricoh multicopier


Hi

Thanks for posting at Fixya

Dear you need to check the formatter board assy. as for the display there is no problem but you need to remove the formatter board and make sure it connects correctly and do not forget to check the memory modules for malfunction too.

May 27, 2014 | Ricoh Aficio MP-C4000

1 Answer

Installing a new blank hard drive in a DesignJet


The hard drive is the formatter in the T610.
HP has a special operating system software loaded on the hard drive, so you can't just format a blank one and install it.

The whole formatter assembly will need to be replaced.

Mar 15, 2014 | HP Designjet T610 InkJet Printer

1 Answer

Installing a new blank hard drive in a DesignJet T1100,T610


The T610 hard drive is the formatter and has a special operating system software installed on if from HP. You can't format a hard drive and install it...so the whole formatter assembly needs to be replaced when the hard drive goes bad...

Mar 15, 2014 | HP Designjet T610 InkJet Printer

1 Answer

Error 30.01.34


From the service manual.
30.1.34 Loss of communication with the formatter or cable error.
1. Turn off the device and then turn on the device.
2. Check the connections between the scanner assembly and the formatter.
3. Make sure that the hard disk drive on the formatter is connected correctly and that the hard disk is functioning correctly.
4. This error condition can be related to network traffic at the customer site; isolate the MFP from the network and troubleshoot accordingly.
5. If the message persists, replace the scanner assembly.

Nov 29, 2013 | HP LaserJet M3035 MFP Printer

1 Answer

Blank pages


Are you checked cartridge contacts left side of the cartridge bank, you can observe three flexible plastic shells representing the contacts to cartridge,, check them there is the problem....

Jan 30, 2012 | HP LaserJet M3027x MFP Printer

3 Answers

HP Laserjet M2727nf Mfp Printer Scanner Error 8


The HP M2727 has a known issue with the scanner error 8 and bad formatters. HP has extended the warranties on this product. I suggest you contact them directly and they will most likely exchange the unit.

Nov 08, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

HP Color Laserjet M5035 get`s error 30.01.34


First, this model is not color laserjet, only black.
HP LaserJet M5035 MFP
30.1.34 Cable error or loss of communication with the formatter.
1. Turn the device off and then turn the device on.
2. Make sure that the ribbon cable between the scanner control board and the formatter is not damaged and is correctly seated.
3. Make sure that the hard disk drive on the formatter is connected correctly and that the hard disk is functioning correctly.
4. If the message persists, replace the scanner control board or replace the formatter.

Aug 30, 2011 | HP LaserJet M5035 MFP Printer

1 Answer

COMMON problems of hp laserjet1522n mfp


the formatter board, display control panel and the flat bed scanner assembly. Mostly its the formatter board.

Aug 05, 2010 | HP LaserJet M1522n MultiFunction Printer

2 Answers

No display on hp laser


Does the printer otherwise print? If so, then the panel is dead.

Aug 20, 2009 | HP M2727NF Laserjet Printer

Not finding what you are looking for?
HP LaserJet 4350dtn Printer Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...