If I open the screen anymore than about 45 degrees, the light on the screen will shut off. The screen is still on, as is the laptop itself. I can tell because at a certain angle I can still see what I'm doing, but it's very hard to see. The light is off, yet the screen still displays everything, almost as if at the darkest setting possible before considered "black". Please any help! Is the problem in the wiring near or around the point where the screen meets the keyboard?

db:: 4.31::Diagonal lines on tm2 screen? fz - Hivmr

www.hivmr.com/db/fzap9jk8dp87mcjk3cc9jsp7fzxk7pz1

There are faint 45 degree diagonal lines covering my brand new tm2 LCD ... with some static looking diagonal lines going from bottom left to top right. .... DB:3.01:Dv6113 Us - Computer Freezes Showing Diagonal Lines On Screen aj ... Also there arediagonal lines that run across the screen at about a 30 degree angle.

3M Privacy Filter for Laptop diagonal-14.1" viewing screen ...

www.amazon.com/3M...diagonal-14.../B00006B8A9

Amazon.com, Inc.
Rating: 3.8 - ‎1,617 reviews
Amazon.com: 3M Privacy Filter for Laptop diagonal-14.1" viewing screen ... Premium 14.0 Inch Privacy Screen for Widescreen Laptop or Computer Monitor .... 3M™ Privacy Filters create a 30-degree cone of vision so on-screen data is .... You'll also notice a large "3M PF14.1W" printed in the top right hand corner of the filter.

FZ190: Faint Diagonal lines on screen? ' NotebookReview

forum.notebookreview.com > ... > VAIO / Sony

You may have a faulty video cable that connects the screen to the motherboard or the video cable needs reseating to the motherboard.

Did anything happen recently? If you have an external monitor, plug it into the vga port and see if you get a display on bootup. Does the computer stay on or does it shut itself off right away?

Instructions Things You'll Need:

• Kenmore gas dryer
• Vacuum with hose attachment
• Replacement fuse, if necessary

Dryer Not Heating
1. Remove lint from your dryer's lint screen. Remove the lint screen from your Kenmore dryer and vacuum the area behind the lint screen with your vacuum's hose attachment.
   
2. Check to make sure that the dryer temperature is set appropriately, and has not inadvertently been turned to "Air Fluff."
   
3. Ensure that the gas valve on the supply line to your Kenmore dryer is completely open.
   
4. Check the room temperature in your laundry room to make sure that it is at least 45 degrees. Your Kenmore dryer will not operate properly at temperatures below 45 degrees.
   
5. Make sure that the dryer outlet grill is not blocked by a fabric softening sheet.
   
Dryer Not Running
6. Check to see that the dryer cord is properly plugged in to the electrical outlet.
   
7. Check your fuse box to make sure that the fuse is not blown, or check your circuit breaker to make sure that it has not tripped. Replace the fuse if necessary or throw the circuit breaker.
   
8. Check the outlet itself to make sure that it functions properly by plugging in a portable device.
   
9. please comment on these solution on how it works by rating or voting.
   

1) Connect an external monitor to the monitor port of your laptop.
2) Shut down your system from the START menu.
3) Take out the battery
4) Leave power cord in for 2 minutes...then REMOVE it.
5) Press your on/off button for 45 seconds.
6) Make sure your screen is at greater than 90 degrees
7) Plug in
8) Press your on/off button to power laptop.

if this doesn't work, try taking out the RAM.

When you turn your laptop to different angles can you see extremely faint graphics? Try shining a bright light at it an turn it at a 60 degree angle to your eyes. If you can see any graphics then your inverter board is bad. It it located just below the screen in front of the keyboard. The inverter itself is very inexpensive (about $12). Having someone install it shouldn't take more than 45 minutes. Let me know if this helps you.

Having display cable replaced.

Thanks!

If you see a very dim image or black screen or flicking image on the LCD screen it means you have a backlight problem.

Connect an external monitor to your laptop and power it up, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight.

Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
Check out www.lcdparts.net for parts, repair service and DIY info.

Perhaps your connections on the inside have come loose. It may warrant you take it to a specialist to check it over before it gets any worse. Some other person was on here some time ago who had a similar problem and all it was is the switch in the lid. Apparently they tinkered with it by just kept on pushing it back and forwards as if to continue to open it and it came right they tell me that they hardly used it thats why!.