Briggs & Stratton Briggs  Stratton 1800 Psi Elec Pressure Washer Logo

Related Topics:

Posted on Sep 10, 2010

Can't get my Briggs & Stratton to dispense soap? Brand new. It is electric 1800 psi. I filled both canisters and have turned the knob for both sides to max and nothing.

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 30, 2010

SOURCE: 2200 psi husky briggs and stratton pressure washer

After a long none use, I tried to wash my driveway and powered on the washer,it did, but when i tried to engage the power washer by pressing the wand lever, it did not engage. What can I do to get the power washer working?

Ad
A

Anonymous

  • Posted on Oct 20, 2010

SOURCE: I do like to know if this washer is good enough

We power washed houses for years with a 2400psi machine. The machine weighed about 90 pounds. 1 strong man could pick up the weight, but usually it took 2 men to unload it from the trailer.

A small machine can advertise 2400 psi ... but that is for 3 square inches at a time. The heavier machine shoots a 10" or wider swath of 2400psi.

We ran our machine twice a week for years. We had a honda engine. I'm sure the briggs engine is good. I wouldn't buy a used machine... unless the price was low and it started on first pull. Electric starter on your power washer might be a repair-waiting-to-happen because it is constantly exposed to water and dirt.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Will not produce pressurized water

check the pressure regulator valve. It may be set wrong or stuck open. If that is not the problem then a valve may be stuck in the pump.
0helpful
1answer

Pressure washer won't deliver pressurized water.

sounds like you have a blockage maybe in your water hose ,ideally your water hose should be around 25 feet..or you may have an o ring in the gun where the tip goes.. is broken..that will affect your pressure..check also filter where water hose connects to the pump make sure thats clear
0helpful
1answer

My pressure washer will not mix with detergent

First you need to see if you have to utilize a soap nozzle normally black in color and with a large orifice that should create low pressure and or a selective change over nozzle with a spray pattern of 65 degrees.If so then you may have a clogged port where the chemical line connects to pump inside there is a check valve with a ball bearing that may be stuck from previous use without rinsing,free the ball by letting water flow with no trigger gun connected just water coming out of hose engine off and insert a nail or pin long enough to push the ball that is in the barb carefully til you hear ******* good luck.
0helpful
2answers
0helpful
1answer

I have a 2200 Troy Pressure washer, I cannot get it to draw a detergent solution. I am using the black soap nozzel, i have a new siphon hose. any ideas?

Dismount the bolt that is use to connect the soap line.Turn on the washer and test if you fill if is "suction" intake air.Sometimes it becomes clogged so see if anything is clogging the suction .Is that not work the suction system is bad.
0helpful
1answer

I do like to know if this washer is good enough for my business as a used car dealer? Briggs & Stratton Murray 020456 2400 PSI 20 GPM 190cc Briggs Stratton

We power washed houses for years with a 2400psi machine. The machine weighed about 90 pounds. 1 strong man could pick up the weight, but usually it took 2 men to unload it from the trailer.

A small machine can advertise 2400 psi ... but that is for 3 square inches at a time. The heavier machine shoots a 10" or wider swath of 2400psi.

We ran our machine twice a week for years. We had a honda engine. I'm sure the briggs engine is good. I wouldn't buy a used machine... unless the price was low and it started on first pull. Electric starter on your power washer might be a repair-waiting-to-happen because it is constantly exposed to water and dirt.
0helpful
1answer

I have a white mower with a 18 hp intek v-twin briggs & stratton motor. I was cutting the lawn and it loss power all of the sudden, then it died. Now it won't start. I changed the plugs, which looked...

back pressure is from a blocked muffler ( carbon build up)
if it is that old then it could be overheating from grass and dirt build up around the cylinder fins and not cooling properly
0helpful
1answer

Sears 2600 psi power washer

there should be a low presure tip for dispensing wash cleaner or if you have an adjustable wand turn it to low presure setting also make sure the suction tube is open some have a adjustable filter...good luck
1helpful
1answer

Oil

Remember when your searching for something you can't find the internet is always your best bet. You should also use a good search engine; www.bing.com is one of the best search engines I have ever used. I searched some stores that have the oil your looking for, one online store is www.amazon.com and if you have one near you and they also carry it at Sears. The grade of the oil is definitely weird, 75W90. Also if you would like to look for other stores that carry it go to Bing and type "Briggs & Stratton Pressure Washer Oil" into the search bar.
19helpful
2answers

2200 psi husky briggs and stratton pressure washer used 2 years never used soap dispenser trying now is not drawing soap no longer have manual to see how to connect adjust can you help?

After a long none use, I tried to wash my driveway and powered on the washer,it did, but when i tried to engage the power washer by pressing the wand lever, it did not engage. What can I do to get the power washer working?
Not finding what you are looking for?

117 views

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Briggs & Stratton Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...