Question about Remote Start System

1 Answer

I purchased a avital 4103 remote start kit.i also have a viper 300 esp alarm system installed. my question is can i use the avital remote control to activate the viper alarm and start the car along with locking and unlocking doors i'm told i can use the viper alarm remote to start car,open & close door and activate alarm. installer would use the ''AUX' button which is not being used on the viper 300 esp remote to start car. i would like to use the 4103 remotes to do this. the 4103 remote does everthing but activate the alarm when you lock the car. sorry for going on and on. i have a 1996 honda accord. Please help. thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 219 Answers

Avital and viper remotes even though they look the same, they operate at different freqs. Im a retired alarm installer i could never get them to interchange.

Posted on Apr 09, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: driver's door won't unlock with remote

This may be a problem with wiring. I will need to know what the make and model is of the car. Also keyless entry system stock OEM or was that an option you have added? Lastly, did you install this system or was this installed by a cetified DEI corperation?

Thank you,
Luis

Posted on Dec 04, 2008

  • 34 Answers

SOURCE: im about to install a

the one you need to use is the wire that shows a 12volt power in cranking posision

Posted on Jan 09, 2009

  • 5 Answers

SOURCE: i have a viper alarm with remote start the remote

the alarm is in valet mode .open a door press lock unlock lock on the remote and it should take it out of valet mode

Posted on Oct 09, 2009

  • 1 Answer

SOURCE: Keyless Entry doesn't unlock my doors anymore

Did you get help? My problem is similar but not as bad. My viper550ESP no longer remotely unlocks the doors (well very, very occasionally it does). That is the only problem.

Posted on Nov 25, 2009

  • 2 Answers

SOURCE: my avital 4103 does not unlock the passenger door

Its not the avital piece that's the problem, it's your INSTALLER that is/was the problem....haha, got somethin wired wrong!! It only does what you install it to do! :)

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset remote for a Viper 300 alarm 2 button 2 way to start my ignition no valet switch


If you follow this diagram, you should be able to locate your Valet switch. I have seen other questions like this and I believe that they have hidden the function by using an exsisting switch, seldem used(?), in your console. All you should have to do is eith tract the wire that comes from the port on the alarm modules body, or apply +12vdc to one of the leads identified for the valet function.

Best of luck!

Viper 300 ESP Installation Manual Wiring Quick Reference Guide

Feb 12, 2016 | Viper Vehicle Parts & Accessories

1 Answer

I have a 1995 ford f 150 truck with a 300 viper alarm the remote isn't working and no valet switch how do I bypass both to start my truck


In the wiring harness for the alarm is a Gray wire. Applying +12vdc to it will give the Valet function to you.

Best of luck!

Viper 300 ESP Installation Manual Plug in Harnesses Super Bright Led Valet...
http://www.manualslib.com/manual/755964/Viper-300-Esp.html?page=32#manual

Feb 12, 2016 | Viper Vehicle Parts & Accessories

1 Answer

I have had the Avital 4103 installed in my truck a couple of years ago. Over the last few days while driving, the horn alarm goes off by itself. It is happining about every 5-10 minutes. I need to keep...


The bypass module is most likely interfering with the vehicle data causing the OEM security to trigger. Take it to a security/remote start retailer and have the bypass module reprogrammed or replaced.

Apr 06, 2014 | 4103LX 4Button Remote Start System with...

1 Answer

I need to know the steps ( opening driver door, turnig the key on n' off etc,etc. ) to activated the alarm 4103


The 4103 is not an alarm! It's a keyless entry and remote starter. So...what are you trying to do.

Feb 13, 2013 | 4103LX Remote Start System with Two...

1 Answer

I had an avital 4103 remote start professionaly installed and now then i go to put the key into the ignition it wont start. I have a 2001 chevy trailblazer. The dash flashes security and i leave my key in...


U are probly opening the door then hitting ur doorlock button then shutting the door. The factory system is being armed whwn u loxk the door. Try shutting the door without loxking it. See if ur factory alarm light came on. If that solves ye issue, u need to some minor rewire on ur alarm.

Sep 05, 2012 | 4103LX Remote Start System with Two...

1 Answer

I have a problem with my avital 4103 remote starter everytime i try to start try to start my car my car alarm goes off


If this is the factory alarm going off when you remote start the vehicle, the factory disarm wire is not connected. If you would list the year/make/model of the vehicle, I could direct you to the wire.

Feb 24, 2011 | 831002/4100 4100 REMOTE START SYSTEM WITH...

2 Answers

AVITAL 4103 REMOTE STARTER STARTS BY ITS SELF RANDOM AFTER INSTALLATION NOT SET ON COLD START


Check the alarm program it shoudl be programing to turns it On every 2 hours, or if you have a temperature sensor should be programed to turns it On when is too cold.

Jan 05, 2010 | Remote Start System

2 Answers

My avital 4103 does not unlock the passenger door when unlocking OR set the alarm when locking - should it?


Its not the avital piece that's the problem, it's your INSTALLER that is/was the problem....haha, got somethin wired wrong!! It only does what you install it to do! :)

Dec 11, 2009 | 831002/4100 4100 REMOTE START SYSTEM WITH...

4 Answers

Hello. I have an Avital 4103 system and the key light on the dash does not go out after starting the car, inserting the ignition key and turning. I can drive the car, but the key light keeps flashing and...


I have a Dodge Caravan 2001 SE. Had the Avital 4103 installed. My question is, before installation i had a Chrysler car alarm in the van. When the remote start was installed they removed the alarm.
The shut down toggle switch was not installed, also the push button valet switch was not installed also. Is this a correct installation, I was told that I did not need the last two items to be installed.

Oct 27, 2009 | 831002/4100 4100 REMOTE START SYSTEM WITH...

Not finding what you are looking for?
Remote Start System  Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viper Vehicle Parts & Accessories Experts

Tre Elkins

Level 3 Expert

643 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Joseph Gallucci

Level 2 Expert

120 Answers

Are you a Viper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...