Question about Logitech QuickCam Pro 9000 Web Cam

2 Answers

Why wont my camera be recognized by my computer? software is compatible and will install but then the camera will not turn on or be recognized once installation is finished

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 10,322 Answers

1st You download Webcam Driver.
my camera After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Logitech Camera Drivers for Windows XP Vista Windows 7

Posted on Jan 08, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PC wont recognize my jabra cruiser...charges...but cant use PC suite...connected directly to the PC.


If you are sure about the printer drivers compatible with the Operating System, then install the drivers and connect when it ask to connect the printer with computer.

If printer drivers are not compatible with your computer operating system then you have to change the OS.

Jan 26, 2015 | Computers & Internet

7 Answers

Vivitar 5100 to use Vista for viewing photos


Do you have the pic software for the camera, and if so, is it not compatible with Vista?

Aug 15, 2008 | Cameras

1 Answer

Wont respond with computer it did in the past


Two potential solutions.
One would be to try re-loading your drivers to recognize the connected camera, and you may want to check to see if there are newer ones available from Canon. Sometimes computer updates replace some components which messes with previously recognized devices and/or the device manufacturer also updates their drivers to maintain compatibility.
Second would be to just pull the flash memory card and use a USB adapter for it to plug into the computer. I prefer this method to constantly opening up and connecting my camera up for cabling. But then I always have extra flash memory cards, so I swap them often.
There's less of a chance of problem reading from your USB adapter than by connecting the camera, which can sometimes cause conflicts after installing new hardware of software.
I hope this helps!

Feb 14, 2012 | Canon PowerShot S2 IS Digital Camera

1 Answer

I installed the PC Suite for my LG BL40, but it won't connect via USB and my computer doesn't have a bluetooth device. |Ive tried everything suggested and when I connect choosing Music Sync, it connects bu...


First, syncing is the transfer of data between computer software's that are designed to acquire and share with another entity. The sync function usually is embedded in the computer program. Once the computer recognizes compatible software that has several capabilities including transferring data, a USB connection capacity should be achievable. Usually devices that are designed for data transferability should be capable of acquiring a USB connection either as physical cables or wireless Bluetooth technology. The power to sync is contained in the software program. Once software that has sync capabilities is installed on the computer, any USB cable that is attached to an empty port would display a user message asking for further procedures. For example, USB connections on the computer that has media software's would display device recognizes link requiring data transfer. The solution lies in the software that is relied on for sync capabilities. Acquire Windows Media player, Real One player, or ITunes player as downloadable onto the computer to achieve compatibility.


Important Notes

USB ports are available on all computers as versatile connection links to devices that would require communications. The computers original systems are expected to recognize USB cable connection as manufacturers default. Usually, the computer is likely capable of upgrading several software programs that would least communicate with the USB. For example, the program suit installed has compatibility requirements to perform on the computer as an entity. Also, the program suit requires compatibility with USB connection for another device that would be connected to the computer. Attempt to install media transfer programs that are designed with sync features.

Jan 26, 2011 | Computers & Internet

1 Answer

My computer wont recognize my digital camera


Have you tried using Nikon software such as Transfer NX or View NX (available to download off the web for free from your Nikon Website)

This may help,if you are using "Generic" software this may be part of the problem.

See if this helps and let me know.
Ian561

Mar 29, 2010 | Cameras

1 Answer

My sakar kids cam will not work the software wont recognize it


If you Vista program on your computer, then software that is brought with products these days are not compatable with this program. I had to gain solution from a computer shop. Although you can download the software needed which is compatable with Vista. Not sure if it free, some software are free on other products.

Aug 26, 2009 | Sakar Kidz Cam Digital Camera

1 Answer

The Computer Doesn't Recognize the camera after re-installing the software that came with camera


Turn on the cam first before connecting, make sure that the LCD of your cam turns of when connected to pc also double check the usb connection from end to end

May 07, 2009 | Kodak EasyShare Z710 Digital Camera

1 Answer

My computer doesn't recognize my new cord for my camera


Try to check if the camera software and driver is properly installed in your computer.

Make sure that your camera is compatible with your computer operating system.

Are you sure you purchased a genuine Samsung USB cord? Because it would be much advisable to use Samsung USB cable.

Try to go to MyAccessoryMall.com and you may purchase the cable there.

Jan 03, 2009 | Samsung Digimax D53 Digital Camera

1 Answer

My zune


Make sure your OS is compatible and that all software is installed

Make sure the hold/lock is not engaged

Make sure the OS is compatible

Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.



Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

May 31, 2008 | Microsoft ZUNE JS8BRPBDLUG MP3 Player

1 Answer

Unable to tansfer video to computer using DV cable..


Pinnacle software will recognize the camera installed through a firewire cable once the camera is turned on. Windows movies software doesn't recognize DV cameras. You may be able to get capture to work if you go to Microsoft.com and download the Windows Media 9.0 Development Kit. I believe DV input is a capture option.

There has to be a 3rd party program installed to get it to recognize it.

Good luck on that.

Sep 20, 2007 | Canon ZR800 Mini DV Digital Camcorder

Not finding what you are looking for?
Logitech QuickCam Pro 9000 Web Cam Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...