Question about Samsung SL202 Digital Camera

1 Answer

My camera lens will come out, but the screen will still be black.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. Please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen black, but with all menu options visible. Black screen after taking a picture


Hi,


The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to Nikon service center. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost.


Thank you

Jul 20, 2010 | Nikon Coolpix 5700 Digital Camera

2 Answers

Canon A470 digital camera-black screen,no image on screen


Hi,

The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to cannon service centre. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost.

Thank you

Jul 13, 2010 | Canon PowerShot A470 Digital Camera

1 Answer

Camera switches on but no display on screen it is black. when switch on camera screen shows canon logo and beeps then goes black on image shown on screen


Hi,

The black screen problem means the lens sensor is spoiled due to over exposure to heat. Its better to give it to cannon service centre. If your camera is under warranty period its well and good they will replace the lens sensor for free of cost.


Thank you

Jun 10, 2010 | Canon PowerShot A60 Digital Camera

1 Answer

The screen is black. And pictures turn out black.


Hi there your lcd screen is fine but the Chances or damaged are lens or sensor of lens or circuitbord disconnect from the lens sensor. All cases you need to visit service center. Thanks.

1effebd.jpg

Apr 04, 2010 | Samsung Digimax D53 Digital Camera

1 Answer

My pentax option A10 turned black on the screen and won't open


Since the screen went black BEFORE the lens retracted, it makes me think this is a main board problem. The only other possibility is that it is the lens assembly, but since it went black BEFORE the lens retracted, I don't think that is it. I can replace the main board for $40, or you can send it to pentax in Arizona, and they will do it for about $90.
The main board is NOT something that I would suggest anyone try to replace as a DIY project. There are too many small screws, and delicate connections to deal with.
You can contact me at: mrfixitmark at comast dot net

If you just want to sell the camera as-is, I also buy all pentax a10, a20, a30, a40 cameras, in any condition.

Mar 28, 2010 | Pentax Optio A10 Digital Camera

1 Answer

Oops! dropped camera. camera will not activate, black screen, "Lens error, restart camera.


black screen, no image formation,shutter is defective.if not allienment of the lens unit to the mother board.so take it to camera tec.

Mar 07, 2010 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

First a black screen, then a lens error


For the lens error:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

For the black pictures (after you've corrected the lens error):

http://camerarepair.blogspot.com/2009/05/simple-fix-for-stuck-shutter.html

Note, if you're going to try fix 5a on the above blog page, do it with the camera turned off to lessen the chance of damaging the lens.

Jul 04, 2009 | Canon PowerShot SD1000 Digital Camera

1 Answer

Canon Powershot SI screen goes black after taking a photo


That sounds like a sticky lens shutter. They usually have to be replaced, as they usually will need parts. When the camera is working look inside the lens and take a picture(with flash turned off). You should see a black shutter door clicking shut in the lens. When the camera acts up, look inside the lens again. If the door is staying shut full time, that is your problem.

Nov 17, 2008 | Canon PowerShot S1 IS Digital Camera

1 Answer

Black particles on focusingscreen


If the specks are just on your viewfinder focussing screen, they won't be on your pics. If they're on both your pics and focussing screen, you need to find someone else to clean your camera. Cleaning either your CCD sensor or your screen yourself can leave scratches. Changing lenses often can suck dust into the inside if the body is dusty. Try another repair shop for thorough cleaning - it shouldn't cost more than $50.

Dec 17, 2006 | Nikon D70 Digital Camera with 18-50mm Lens

Not finding what you are looking for?

Open Questions:

See all Samsung SL202 Digital Camera Questions

Samsung SL202 Digital Camera Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...