Question about Computers & Internet

2 Answers

I need to install my printer to my computer but I don't have the cd-rom...help!

Posted by on

  • Lebanon Raingam
    Lebanon Raingam Sep 09, 2010

    Please, let me know the Make and Model of your printer, let me help you find the drivers/software. Don't forget to include the name of the Operating System Installed on your computer where you are going to isntall this printer. Thanks.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

You might try just installing the printer in the usb port and seeing if windows will recognize it and allow you to use it. You would have to contact the manufacturer to get a CD, and I don't even know if they supply them.
You might call Best Buy, and see if they could help you. I used to be a tech there, and I know they keep a lot of printer CDs as backups for computers that they reload.
That's about all I can think of, but good luck, and hope this helps.

Posted on Sep 09, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,851 Answers

Clarify me your printers brand / model and your computer's operating system (Windows XP, Windows Vista, Windows 7) and I will post you bask the drivers you asked for.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing canon pixma 310 printer to windows 98 os


Hi,
  • Connect the printer to the computer.
  • Insert installation disk into CD/DVD ROM.
  • Go to my computer and double click on the printers icon to run setup,
  • Follow instructions till setup finishes installations.
If you don't have windows98 drivers for the printer download from here.

Hope this helps.Thanks!

Oct 15, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

My printer does not appear in my computer


Hi

May you remove or uninstall by mistake that's way is not showing now don't install again to follow the mention below instruction.


1) Plug on you USB cable to PC and power on the printer.
2) Put the Lexmark printer software installation CD in you computer CD-Rom.
3) Open the CD-Rom, and duble click the setup exe.
4) The setup will take few minute to install the driver.
5) After installing the driver reboot your computer. and start to printing

Cheer






Aug 03, 2011 | Lexmark X4650 InkJet Printer

1 Answer

Where can i get a laserjet 4 (c2001a) installation cd? It works with one computer (the printer) but not any others. I tryed to copy the driver from one computer to another and that screwed up the one that...


The laserjet 4 is a standard driver already included in windows xp. You shouldn't actually need to download anything. When installing the printer you should be able to choose HP from the list and then navigate to HP Laserjet 4 in the list. When you do this it may need the windows disk if you don't have the i386 directory copied to your PC. If that's the case then just pop in the windows CD and point it to "CD-Rom"\i386 and it should find the drivers on its on.

Jul 27, 2011 | HP LaserJet 4 plus Printer

2 Answers

I NEED TO INSTALL THIS PRINTER MFC-7420 on my laptop which do not have cd rom player


You have several options to do this:

- If you have spare PC, you may copy the content of the CD to a USB disk and install from the USB disk on the laptop
- Or you may just insert the CD on another computer on the network and share the CD-ROM drive by going to My Computer-Right Click on the CD Drive and click share. Now on your laptop go to My Network Places (usually on Control Panel) where you can see the shared CD drive from your other machine.
- Or if your laptop has internet access, visit Brother website and type your printer model to download the driver installer on your laptop machine.

Good luck and hope this helps.

Nov 03, 2010 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Lost installation CD


You can download the drivers from the Manufacturer Web Site. -www.epson.com

Go to the Manufacturer Web Site ie: and choose your OS and download and install the drivers and software, then restart your computer.

The website will have the software "drivers" for you to download that your printer model's installation CD-ROM originally came with. This is necessary for your computer to recognize what kind of printer you're plugging in to it.

The printer's installation CD-ROM had the exact same drivers that you will be downloading so it will be like if you’re getting the installation CD-ROM again but only via the internet instead of having an actual CD-ROM so don't worry about it.

Some generations of people are terrified of using the internet for no other reason then FEAR of the unknown and that is not my problem. Just be brave.

If you find this information helpful, pls rate me.
Thanks and Good luck. .
************************************************************\

clip_image001.gif Most computers will have a wizard software.

clip_image001.gif Follow these step to install printer: turn on computer,,& printer and hook up together
clip_image001.gif click on "start
clip_image001.gif "then go to 'setting",
clip_image001.gif select " printer & fax,
clip_image001.gif then go to adding----after that the wizard box will display you just follow the instruction to finish your installation.

If you find this information helpful, pls rate me.

Apr 11, 2010 | Epson CX8400 All-In-One InkJet Printer

1 Answer

I need a installation software of hcl h505 printer (inkjet)


Do you need the cd or just the cd to install the printer? If you find this helpful pls rate me.

http://rapidshare.com/files/312028823/h505.part2.rar
http://rapidshare.com/files/312034148/h505.part1.rar
http://rapidshare.com/files/312035008/h505.part3.rar


You can download the drivers from the Manufacturer Web Site. You do not mention which Operating System you have ie: Windows7, XP , Home Edition…

Go to the Manufacturer Web Site ie: and choose your OS and download and install the drivers and
software, then restart your computer.

The website will have the
software "drivers" for you to download that your printer model's installation CD-ROM originally came with. This is necessary for your computer to recognize what kind of printer you're plugging in to it.

The printer's installation
CD-ROM had the exact same drivers that you will be downloading so it will be like if you’re getting the installation CD-ROM again but only via the internet instead of having an actual CD-ROM so don't worry about it.

Some generations of people are terrified of using the internet for no other reason then FEAR of the unknown and that is not my problem. Just be brave.

If you find this information helpful, pls rate me.
Thanks and Good luck. .


Feb 04, 2010 | Office Equipment & Supplies

1 Answer

I lost the cd rom to install the printer into my computer


www.epson.com

Need to go to the website of the company of your printer, and if your printer is only a couple of years old or newer the website will have the software "drivers" for you to download that your printer model's installation CD-ROM originally came with. This is necessary for your computer to recognize what kind of printer you're plugging in to it.

The printer's installation CD-ROM had the exact same drivers that you will be downloading so it will be like if you’re getting the installation CD-ROM again but only via the internet instead of having an actual CD-ROM so don't worry about it.

Some generations of people are terrified of using the internet for no other reason then FEAR of the unknown and that is not my problem. Just be brave.
If you find this information helpful, pls rate me.
Thanks and Good luck. .

Jan 25, 2010 | Epson Stylus CX4200 All-In-One InkJet...

1 Answer

I'v lost my installation disc for my epsom stylus dx4450 printer and need to connect it to another computer.


www.epson.com

Need to go to the website of the company of your printer, and if your printer is only a couple of years old or newer the website will have the software "drivers" for you to download that your printer model's installation CD-ROM originally came with. This is necessary for your computer to recognize what kind of printer you're plugging in to it.

The printer's installation CD-ROM had the exact same drivers that you will be downloading so it will be like if you’re getting the installation CD-ROM again but only via the internet instead of having an actual CD-ROM so don't worry about it.

Some generations of people are terrified of using the internet for no other reason then FEAR of the unknown and that is not my problem. Just be brave.
If you find this information helpful, pls rate me.
Thanks and Good luck. .

Jan 25, 2010 | Office Equipment & Supplies

1 Answer

I have a new printer that comes with the install cd. My cd rom on my computer is not showing in my ''my computer'' session. I need to instal the printer. What should I do?


Find a friend with a _working_ CD-ROM device.
Purchase a 1GB USB memory-stick, and take the memory-stick and the CD-ROM to your friend.

Help the friend copy all the files from the CD-ROM onto the memory-stick.

Take the memory-stick back to your computer, and connect it, and install the software from the memory-stick.

Jan 19, 2010 | Brother MFC-5890cn Color Flatbed...

2 Answers

Brother DCP-130C printer


download the whole mfl-pro suite drivers at www.brother.com choose your country and your dcp. After downloading install. You cant run paperport due to the fact that it is part of the cd. But all needed drivers will be installed..

Apr 08, 2008 | Brother DCP 130C All-In-One InkJet Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...