Question about Whirlpool Washing Machines

1 Answer

I have a Whirlpool Ultimate Care that was present in the house I rent; thus, I wasn't sure how old it was. It developed a loud grinding noise but continued to work until two days ago when it stopped draining. Today the repairman said it needed a recirculation valve, which won't even be available for over a week because most washers don't use them anymore. He said the washer is 10-12 years old. Do you advise going ahead with the costly repair or putting the money into a new washer?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,430 Answers

I would put the money towards a new machine. I would also go with a basic direct drive top load machine. As you can probally see from this forum the appliance repair business is very busy mainly because of the constant electronics failures. If you go with a more energy efficient modern front load machine buy the extended warranty it will be worth it for just one repair.

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool electric dryer makes a loud grinding noise


Is there anything caught between the dryer drum and any housing. Can you hear it when the drum is turned by hand.

Jan 26, 2014 | Whirlpool Dryers

1 Answer

My washer will wash, rinse and spin but after it spins it makes this really LOUD grinding noise and shakes. What could it be?


Rebuilt transmission or bad coupler, to check coupler remove pump & motor from
transmission see if it is toast.

May 26, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Squealing noise


Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

98f

Jun 27, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care Model LSR8233EQO - Loud noise during final rinse/spin


Sounds like the clutch, mi9ne works fine but is noisey when spinning, repair guy said it was the clutch.

Feb 05, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Spin cycle noise


pull up and down on your basket to see if it has up and down play in it
kind of rock it side by side too

Dec 30, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Top loading washer whirlpool


When we move the drum, even with our hand, about 1/2 way through, there is a loud clicking, popping type noise? Sounds like a train is coming through the house before it stops the cycle?

Dec 20, 2007 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Machine wont wash


needs a new motor coupler. small round rubber piece between the motor and transmission. easy to replace

Oct 29, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud Noise at the End of the Spin Cycle


some item has fallen down between the outer and inner wash tubs? remove it

May 20, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Grinding noise when it goes to agitate or spin.


gramps Most likely the problem with your washer is worn out motor drive coupling. You can buy it here: http://click.linksynergy.com/fs-bin/click?id=SrmyP8LkIos&offerid=92089.547094027&type=10&subid= If you need help to replace it, let me know. Gendos...post back

Feb 05, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2287 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...