Question about Matrix Star SP200 Receipt Printer

1 Answer

I unplugged printer from wall to move on counter.Now it won't turn on????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the internal fuse, it is located at the bottom of the case.

Posted on Dec 22, 2010

  • Superness Dec 22, 2010

    Check the internal fuse, it is located in the bottom of the case.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: will not turn on after unplugging from wall

At what situation it has gone....may be power supply problem it has gone......first check power cable and power point supply ....still its not work call any printer service engineer

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Remove a Stuck Document That Won\'t Delete from a Windows PC Printer Queue?


Unplug printer from wall. Reboot computer. Check that document is gone before plugging printer back in. NOTE, "unplug from wall" does not mean "turn printer off". Unplug it.

Oct 20, 2016 | Computers & Internet

1 Answer

All of a sudden the MP560 won't turn on. The outlet is working but the printer doesn't respond to the ON button. I've checked the power cord it seems to be ok, the cord hasn't moved or been...


This may be a longshot, but many electronic devices like TVs, dryers with electronic computerized controls, entertainment systems like the Wii, and other devices sometimes get "confused" and won't turn on, turn off, or otherwise work properly, perhaps due to a small power surge in your AC line.

I've found that one of the first things to try when it appears to be a failure of the electronics and not a mechanical issue is to unplug the device at the wall (to make sure that any power adapter is also unplugged) and wait about 10 minutes for any residual electric charge to dissipate. Then plug the device back in and give it a try. This has worked with a television, a Wii console, an electric clothes dryer, and some other devices that I thought had died for good. This may explain why sometimes a device is taken to a repair shop and it works fine.

There are, of course, other reasons that the unit won't turn on, but I would try this first before looking for other reasons for the problem.

Jul 23, 2011 | Canon MP560 All-In-One InkJet Printer

1 Answer

I cannot get my Lexmark 5600-6500 to turn on


Try to unplug the power adapter from the printer.
printmastert_60.jpg

Then unplug the power cord from the power outlet. Wait at least 10 seconds before re-plugging the power cord into the power outlet in the wall (bypass any power strip) and the power adapter into the printer. This will give enough time for the printer to reset itself. If printer won't automatically turn on, press the power button. If that doesn't help, please contact Lexmark Technical Support Center for additional assistance.

Jun 28, 2011 | Lexmark X5650 All-in-One InkJet Printer

1 Answer

I need to reset the waste ink counter on my epson 2200 printer.


1. Turn off the printer power and unplug the power cord from the wall. Disconnect the computer interface cable at the back of the printer. 2. After one minute reattach the power plug to the wall, but don't reattach the computer cable. 3. Hold down the ROLL and the PAPER ADVANCE buttons simultaneously. 4. Turn the printer on. after 2 blinks, all the ink lights come on, then release the buttons being held down. 5. Press and hold the ROLL button for 10 seconds 6. Release the ROLL button and the printer will initialize, which resets the Waste Ink Pad Counter. 7. Once initialization is complete, turn the printer power off. 8. Reconnect the interface cable. 9. Turn the printer on and print a document.

Oct 20, 2010 | Epson Stylus 2200 InkJet Photo Printer

2 Answers

Epson R2400 paper and ink lights blinking red. Ink waste pad replaced and counter reset to 0. Lights still blinking red. Close inspection for any loose objects in printer but none found. Please advise....


Try to turn on your printer without the ink cartridges. When the printer starts and ask for the cartridges, put them back in.

(To remove the cartridges turn on the printer, watch the print head carriage move, when it is at the center quickly unplug the power cable, move the carriage by hand to a position where you can remove the cartridges, after removing the cartridges push the carriage to the right where it should be parked.)

Sep 02, 2010 | Epson Stylus Photo R2400 InkJet Printer

1 Answer

My printer was working fine until I moved. Once I


check the rating is correct. if the plug has a fuse check that. try a different wall socket

May 09, 2010 | Office Equipment & Supplies

1 Answer

Hp deskjet 940c - all 3 light are blinking


Check this page...

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpd09170&cc=us&lc=en&dlc=en&product=59129

"Here's what it says is the solution for all 3 lights blinking.
  1. Turn the printer off. Unplug the power cord from the back of the printer. Unplug the power cord from the wall outlet.
  2. Wait 30 seconds. Plug in the power cord to the wall outlet. Plug in the power cord to the back of the printer.
  3. Turn the printer on.
If you have completed all of the steps listed above and are still experiencing a problem, service your product."

Dec 23, 2009 | HP DeskJet 940c InkJet Printer

1 Answer

Blinking orange light on hp 932c


Solution

  1. Check to ensure that the top access door is firmly closed.
  2. If the light continues to blink, open the top access door. When the top access door is opened, the print cradle moves so the yellow arrow on top of the cradle points to a drawing of a cartridge. Each drawing describes a symptom.

Solution two:


  1. Turn the printer off. Unplug the power cord from the back of the printer. Unplug the power cord from the wall outlet.
  2. Wait 30 seconds. Plug in the power cord to the wall outlet. Plug in the power cord to the back of the printer.
  3. Turn the printer on.
Solution three:

The print cartridge carriage is stuck.

Solution

1. Open the top access door on the printer.

2. Remove the ink cartridges.

3. Turn the printer off, then on again.

4. Replace the ink cartridges.

5. Close the top access door.

Solution Four:

Issue

The 2-Sided Printing Module is installed incorrectly, not at all, or the back access door is unlocked or open.

Solution

1. Turn the knob on the rear access door of the printer counter-clockwise, and remove the door.

c00179776.jpg

2. Insert the module into the back of the printer.

c00179777.jpg

3. If the lights remain on, remove the 2-Sided Printing Module by pressing in the buttons on the ends of the unit.

4. Re-install the 2-Sided Printing Module by pushing the unit back into the printer without pressing the buttons, until it snaps firmly into place.

Jun 17, 2009 | HP DeskJet 932c InkJet Printer

1 Answer

Zvonko jelusic from belgrade


The print carriage is stuck.

Solution

  1. Open the top access door on the printer.
  2. Remove the print cartridges.
  3. Close the print cartridge flaps after removing the print cartridges.
  4. Turn the printer off and then on again.
  5. Replace the print cartridges.
  6. Close the top access door.
If the resume light continues to blink after the print cartridges are released,

OR

the print carriage is stuck or makes a grinding noise, follow these steps.

Solution

  1. Lift the top cover to the printer.
  2. Turn the printer off and then on again.
  3. Unplug the power cord from the back of the printer when the grinding noise starts. Unplug the power cord from the wall outlet.
  4. Move the print carriage towards the middle of the printer (this procedure may take a couple of tries to get the timing correct).
  5. Take out the print cartridges and close the top cover.
  6. Plug the power cord into the wall outlet. Plug the power cord into the back of the printer.
  7. Open the top cover, reinstall the print cartridges, and then close the top cover
Solution

  1. Open the top cover.
  2. Unplug the power cord from the back of the printer. Unplug the power cord from the wall outlet. Wait a minute or so.
  3. Plug the power cord into the back of the printer. Plug the power cord into the wall outlet

Sep 22, 2008 | HP DeskJet 5550 InkJet Printer

4 Answers

Both red light blinks even after I changed the ink


You can use SSC Service Utility to reset the counters yourself.
Download this prog.
http://www.ssclg.com/epsone.shtml

This is what your local pc shop will probably use ... it's freeware and works wonders !

Feb 27, 2008 | Epson Stylus Photo R220 InkJet Printer

Not finding what you are looking for?
Matrix Star SP200 Receipt Printer Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Matrix Office Equipment & Supplies Experts

ray gallant

Level 3 Expert

41473 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Tom Chichester

Level 3 Expert

33322 Answers

Are you a Matrix Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...