Question about Kodak Easyshare C813 Digital Camera

1 Answer

My kodak easyshare c813 will not turn on. it says on the screen lens error 111,1,0,0 and 221,0,0,0. how do i solve this problem? please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. Please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lens won't open Batteries are new lens error 111,0,0,1 comes on screen


Lens error generally refers to a binding in the gears that operate the lens. May need repair at a Kodak facility.
http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6839/11888/6198

The end of the above link will tell you how to get service for your camera.

Aug 17, 2010 | Kodak Easyshare C813 Digital Camera

1 Answer

Kodak C813 has lens error 126,1,0,-5 when the camera is turned on


Please also try to upload new firmware: I doubt that it will solve the issue, but the alternative is a repair.

Connect the camera with the computer.
Turn the camera on.
Click onto the link and follow the instructions.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=11888/11893&product=EKN034495

Jan 03, 2010 | Kodak Easyshare C813 Digital Camera

1 Answer

Kodak easyshare C813 screen


Hi, are you having issue on camera LCD screen that it will not show anything on the screen? Kodak Easyshare C813 has no feature to turn the LCD screen Off only Kodak Easyshare Z series and some M series that has a view finder that you can switch the LCD screen off and just use the view finder to save battery power.

You can refer to Kodak Easyshare Manual check this site http://www.kodak.com/global/en/service/publications/index.jhtml?pq-path=1398#otherDigitalCameras

For troubleshooting http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

Nov 19, 2009 | Kodak Easyshare C813 Digital Camera

1 Answer

My Kodak EasyShare C813 says lens error 111000 evrytime I turn it on. And then it will shut itself off. What is wrong with my camera?


Fixing your problem could be as simple as cleaning the battery contacts in the camera, or the solution could be a lot more complex and expensive. Here's a link to the Kodak Help Center - it provides a simple Q&A format to diagnose the problem and propose a solution.

http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

Jul 31, 2009 | Kodak Easyshare C813 Digital Camera

1 Answer

Lens problems


there is a problem wit your lens section, get it repaired with your company professionals. Your camera may be fallen or being pressed from front side by someone. The new ZOOM will give the same best result and no further problems.

Apr 18, 2009 | Kodak Easyshare C813 Digital Camera

Not finding what you are looking for?
Kodak Easyshare C813 Digital Camera Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...