Question about Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

POWERS UP W BEEPS BUT NO PICTURE THEN ALL 3 LIGHTS ON FRONT BEGIN TO BLINK STILL NO PICTURE

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

All 3 leds = lamp failure

if lamp is ok, it can also be the lamp driver, color wheel, or dmd board(rare)

first pull out the lamp and check that, likely your bad part, part numbers on the side of the tv, www.dlplampsource.com for parts.
let me know if I can provide further assistance.

Posted on Sep 09, 2010

  • rickyrick198 Sep 10, 2010

    after installing new lamp tv came on w picture 1 time powered down n now same problem exist w "standby" lite on w no power then power up n lites "lamp" led then shuts off n repeats this cycle three times then all three leds blink until power cord is pulled any further help would be greatly appreciated

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 24


2,4 is one of 5 error codes and means:

2blink-then 4 blink---------vertical circuit problem

The set may have a loss of sweep or even Glycol may have leaked from the picture tube above it onto the board in that area.

Vertical circuit is on middle board at front right edge.

Jun 16, 2012 | Mitsubishi WS-55311 55" Rear Projection...

1 Answer

Sony HD Projection TV KDP-57WS550, timer light blinks 5 times and repeats sequence. When power button is pushed sound comes on briefly, no picture, then TV goes off. Please advise.


Mine did this after a power flash. Lights blinking 5 or 6. They blink fast lol. I have sound till tv powers back down. Front yard bond fire? Or any ideas? Thx.
10_18_2015_2_55_53_pm.jpg

Dec 25, 2010 | Sony Grand WEGA KDP-57WS550 57" Rear...

1 Answer

Playstation 3 no video & no sound BUT THE RESET WONT WORK


ok let me try to help you My name is Juanand this happen a lot on the 80Gb units if you try the reset remove your finger before it powers off lets begin ok with the switch off place your finger on the on switch turn the main power switch on and keep your finger ther until it beeps once and then remove your finger before it shuft off try this couple of times but it could be your graphics card so once you have it running again if it freezes or shows a blurry graphics on tv after few minutes then is your graphics card and sorry but they can't be replaced

Mar 12, 2009 | Sony PlayStation® 3 (80GB) Console

1 Answer

Powers on-indicator lights light up, motherboard fan runs, but do


try reseating the dimm ..
I don't see a listing in the manual for 5 beeps as you describe

Jan 04, 2009 | Lenovo ThinkPad X60 Tablet PC

1 Answer

PS3 having problems


try resetting the display (although I don't know if this will help you but worth a shot), press and hold down the power button on the front of the machine until you hear 2 beeps.

Also make sure that all your leads are pushed in fully and you have nothing within range that can distort your picture. (for example if my son uses his remote control car my screen goes flickered, if my neighbour turns on their mower same garbled screen again)

I hope this helps

Nov 25, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Kenmore 46462 powers off during spin cycle - no lights


i cleaned out the pump under the front bottom panel

Feb 03, 2008 | Kenmore 46462 Front Load Washer

1 Answer

No picture


Self test: Turn on and Press the input and menu buttons on front panel together and hold for 5 sec. after 5 sec the power LED will blink a 2 digit seq. This will let you know what error code. Count the first blinks then a short pause then the second blinks. Example 2-3, 3-4, 4-1. Let us know what it is.

Dec 05, 2007 | Mitsubishi WS-55807 TV

Not finding what you are looking for?
Samsung HLP4663W 46" Rear Projection HDTV Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...