Question about Linksys SR2024C 24-Port Gigabit Ethernet Switch

Open Question

How do I reset my Linksys SR2024C to factory defaults

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
AbhiRay
  • 124 Answers

SOURCE: Good morning, how do I

There is a tiny reset button on the back of the switch.

Power off the switch. keep the tiny black switch pressed and do not release that. Power On the switch and the sys LED will blink slowly and then rapidly. Now release the black button and wait for 5 minutes.

Posted on Oct 31, 2010

Testimonial: "Thanks AbhiRay, info is help full, excellent job!"

Ad
AbhiRay
  • 124 Answers

SOURCE: we have lost the password for Linksys srw2008mp

Hi,

To reset to factory Default settings you need to do the below steps

1. Look for the reset button. The reset button is a tiny black button on the back of the switch.
2. Power Off the switch.
3. Press the reset button (preferably with help of a ball point pen or a small head scew driver) keep the tiny black button pressed and do not release that.
4. Power On the switch and the sys LED will blink slowly and then rapidly. 5. Now release the black button
6. Wait for 5 minutes. The switch will boot up with factory default settings.

Best Regards

Posted on Nov 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im trying to find my password for my router but i cant.


Reset Button

Note:

Resetting the router to the factory defaults will delete any changes you have made to the router, including any security settings. This should be used as a last resort.
The first method involves simply pressing a button located on the back of the router. The image below (courtesy of Linksys) shows where the button is located.
linksys-reset.png

Linksys WRT54G Reset Button Location
To reset your router, use the following steps:

  1. Press the reset button for 30 seconds.
  2. The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted.
  3. Open up your Web browser and enter "192.168.1.1′ in the address bar.
  4. For the login, leave a blank ID and enter "admin" as the password.
The router has now been reset. Follow the steps in Securing Linksys WRT54G Wireless-G Router to secure your router and create a good wireless network security.
Through the Web Administration PagesThe second method involves logging into the Web administration pages of the router. Use the following steps to reset the router using this method:
  1. Open your Web browser and enter the IP address of your router. By default, the address is "192.168.1.1′.
  2. Enter your user ID And password when prompted. Hopefully this has been changed, but if it hasn't, the default is no ID and "admin" as the password.
  3. At the top of the Web page, click "Administration" and then "Factory Defaults".
  4. Beside "Restore Factory Defaults", click "Yes".
  5. Now click the "Save Settings" button at the bottom of the Web page.
Your WRT54G wireless router should now be reset to the factory defaults. Ensure you follow the steps outlined in Securing Linksys WRT54G Wireless-G Router to secure your router and maintain your wireless network security.
SummaryThis post has provided two methods you can use to reset your Linksys WRT54G Wireless-G router. If you are having problems with your router, try resetting the router to the factory defaults, and then make the changes again and see if the router starts working again.

Sep 24, 2011 | Linksys Wireless-G WRT54G Router

3 Answers

How do I reset my Linksys WRT400N Router to factory defaults


Reset There are two ways to reset the Router's

factory defaults. Either press and hold the Reset

Button for approximately five seconds, or restore

the defaults from Administration > Factory
Defaults in the Router's web-based utility.

There should be a small hole with a red circle around it on the back of the router next to the power plug hole. Use a pin or straighten paper clip to push the tiny button.

Jan 11, 2011 | Linksys WRT400N Router

1 Answer

Wat is the default ip & pswd of linksys 24 port gbit switch


Try 'admin' and 'admin'.
Or try 'admin' and leave the password field blank.

Dec 15, 2010 | Linksys SR2024C 24-Port Gigabit Ethernet...

1 Answer

My router stopped communicating with modem


LinkSys Wireless-G WRT54G 2.4 GHz Broadband Router with 4-Port Switch:

Go to LinkSys Login. wrt54g_back-panel_mini.gif Resetting the Router will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.) and replace them with the factory defaults.
There are two ways to reset the Router's factory defaults:
The Internet port is where you will connect your broadband Internet connection.

Please Rate Me

Nov 17, 2010 | Linksys WirelessG Broadband Router with...

2 Answers

I need to figure out how to re-set my Linksys WRT54GX2 Wireless0G Broadband Router With SRX200


This article will guide you how to change the router's password and reset it to factory default.
NOTE: Accessing the router's web-based setup page requires a password. The default password of a Linksys router is "admin". For security purposes, it is recommended to change default password.
Changing the Router's Password
Resetting the Linksys Router to Factory Default
Resetting the Router Using the Web-Based Setup Page.


If any more problem encounter,post or thumbs back.




















Nov 02, 2010 | Linksys WRT54GX2 Wireless-G Broadband...

3 Answers

How can I reset an unknown admin pw on Linksys RV042 VPN Router? I'm the new IT guy here, and I don't have the admin pw for our VPN router (and I need to provide remote access to a colleage working...


you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.
To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
Once your router is hard reset, you will need to login and reconfigure it again.
To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router Password: Admin
On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."
Once you are past the login screen, you are able to reconfigure the LinkSys router

Apr 16, 2009 | Linksys RV042 VPN Router

1 Answer

Voip


Hi
Warning This will RESET to FACTORY DEFAULT

There should be reset hole with a button in it if you press this and hold it in. count to ten then release, this will reset it to factory default setting.

If you are not wanting factory reset you will have to login to the linksys the default IP is 192.168.1.1 login name admin password admin.. that is you havent change it. and from there you can find your settings and change them..

Good Luck


Jan 28, 2009 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

2 Answers

Reset to factory default


The router's admin page is http://192.168.1.1 or http://192.168.0.1 and the default password should be either "admin" or "password" without quotes. There should be a choice under "Setup" called "Factory Reset". That will erase the settings and reset it like new.

Alternatively, you can follow the procedure as given below on all the brands I've tried (Belkin, D-Link, Linksys)

1. hold the reset button for 30 seconds (don't release)
2. unplug the power (still holding reset) for 10 seconds
3. plug power back in (still holding reset)
4. hold reset for another 30 seconds - the lights will usually begin flashing in some odd pattern
5. release the reset button
6. wait 1 full minute or until the lights stop flashing
7. unplug the power for 10 seconds, just to do a reboot
8. verify the settings (e.g. SSID) are back to the defaults

Get instant online Linksys router/wireless router support at http://www.vtechsquad.com/linksys-router-support/ to fix Linksys router/wireless router problems.

Oct 25, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Factory Default Reset Procedure


Hold the reset button in for 10-15 seconds... Now its defaulted back to factory and the user name and pass will both be admin

May 07, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Linksys SR2024C 24-Port Gigabit Ethernet Switch Logo

Related Topics:

871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...