Question about Sanyo VPC-S7 Digital Camera

1 Answer

Keep saying lense error - Sanyo VPC-S7 Digital Camera

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. Please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lense error, restart camera


Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

Dec 03, 2011 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

FEE keeps flashing with aperture ring nikor lenses


Your aperture lenses should be set to the biggest f-stop (smallest aperture)

Jun 07, 2010 | Nikon D70s Digital Camera

1 Answer

My Nikon 7900 has a lense error. WHEN TURNED ON IT SOUNDS LIKE SOMETHING IS SLIPPING AT THE LENSE, THE LENSE DOES NOT COME OUT, THEN IT SAYES (LENSE ERROR)


Try jiggling the lens. Use compressed air to blow out any grit around the lens barrel. If that doesn't do it, you'll need to get the camera serviced.

Aug 17, 2009 | Nikon Coolpix 7900 Digital Camera

1 Answer

Lens error 21


try these:-
  • connect it to pc and on it
  • vaccum the barrel of lens
  • changing mem. card and batt. for 2min.
  • shake it.
  • on and off in different positions
  • hit the part near lens softly with palm (trust me this made mine work)

Aug 15, 2009 | Sanyo DSC-MZ3 / VPC-MZ3 Digital Camera

1 Answer

My EX-S5 says lense error


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Jun 10, 2009 | Casio Exilim EX-S600 Digital Camera

1 Answer

LCD screen says "lense error" camera will not operate


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

May 10, 2009 | Casio Exilim EX-Z57 Digital Camera

1 Answer

Fuji finepix a600


If the camera was on when it was dropped you probably jamed the lense coil. The lense coil is what helps the camera smoothly pull in the lense and back out. Now, just to specify, what exactly are you having a problem with? Will the actual lense not go back into the camera when you turn it off; or can you not get your camera off zoom?
Let me know~
Olivia

Oct 30, 2008 | Fuji FinePix A600 Digital Camera

1 Answer

Finepix s5200 camera


Try buying lense cleaner to remove fingerprints, smudges and other 'particles' from the optical lense. Call Fuji, let them advise you.

Sep 10, 2008 | Fuji FinePix S5200 / S5600 Digital Camera

3 Answers

Dsc w7


While turning in off softely press the lense in and out a couple of times. The lense would retract. If not fully, but most of the way, push the lense a little harder in until completely retract. If you turn it on, I should work fine. The reason the lense does not retract is most likely some dust in there somewhere. If it did not help, you would have to open the lense and clean it and close the lense.

I hope it helps,

Jul 13, 2008 | Sony Cyber-Shot DSC-W7 Digital Camera

5 Answers

Lens Error, Restart


Hi

What you are seeing is a generic stuck lens error message, turning off the camera and turning it on again will not fix the lens unfortunately.

Your lens needs to be cleaned or repaired, and if it cant be repaired it needs to be replaced. There are online places that will do it for a decent price and there are others that overcharge by way too much.

Fixya rules prevent me from giving you a link to anything off Fixya that would help you fix your camera.

Good luck from....

Darntoothysam com

May 01, 2008 | Canon PowerShot SD1000 Digital Camera

Not finding what you are looking for?
Sanyo VPC-S7 Digital Camera Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Cameras Experts

kakima

Level 3 Expert

102366 Answers

ray gallant

Level 3 Expert

41362 Answers

The Knight
The Knight

Level 3 Expert

73586 Answers

Are you a Sanyo Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...