Question about Hayward SAND FILTER, PRO SERIES

1 Answer

My hayward s166t filter is missing the index for the control valve i.e. backwash, rinse, etc.... can you please help me? thanks steve alderfer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 331 Answers

Go to the following site... http://www.haywardnet.com/inground/products/manuals.cfm#FiltersSand

Scroll down to the Valves under General Pool/Spa Equipment. Download each of the PDF Dcouments for Valves and find the one that closely matches your design. It will show the position of the different settings.

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just had the spider gasket replaced and now water is "gushing" out the handle


Hi Shari,
I see two possibilities. 1. The diverter shaft o-rings are not sized correctly (or missing). 2. When valve handle was reinstalled it was not oriented properly with the diverter position in valve body.
Hope this helps you.

Jun 14, 2014 | Hayward SAND FILTER, PRO SERIES

1 Answer

I have a hayward s166t filter, guage reads 0 and sight glass water does not swirl when backwashed


Does it show pressure when in "Filter" mode?

If not, then your pump is either not primed, Impeller is plugged, or there is not enough water in the pool, you are sucking air.

Jul 18, 2013 | Hayward S166T Pool Filter System w1 HP...

1 Answer

When filter is set on


The valve on top of the filter has several settings. What is yours set on. If it is set on Backwash or Rinse or Waste, it will allow the pump to send water out the drain. If you have new sand, you probably should run on the Rinse setting for awhile, then switch to Filter.

Jun 22, 2012 | Hayward S166T Pool Filter System w1 HP...

1 Answer

Hayward s166t sand filter has sand in sight glass during backwash


did you get sand in vertical tube if so it will take time to get out of line

Jun 12, 2012 | Hayward S166T Pool Filter System w1 HP...

1 Answer

My filter valve is about 8 years old.(Just FYI) It has been in use for about 3weeks.When the filter is running in filter mode,the backwash line leaks water?? Could it be that it needs a rebuild.Or maybe a...


For best results, replace the spider gasket in your multi port valve (multi port valve, right?) When selecting a mode, only go in a clock wise direction.

Push Pull valve? I dont thnk so but if it is, does not hurt to lube the "o" rings.

Jun 04, 2011 | Hayward S166T Pool Filter System w1 HP...

1 Answer

My Hayward s166t will no back wash when the control valve is in the backwash position. Just sounds come out of hose and it jumps around. Waste will not work either. Could my control value be broken?


Open the multiport valve and I believe you will find the gasket is no longer effective in compartmenting the various ports. This valve should only be moved in a clockwise direction, by the way. Replace the gasket and reassemble.

Aug 18, 2010 | Hayward SAND FILTER, PRO SERIES

1 Answer

Control Valve handle wont stay in position


The valve should be about $100. We sell it for 90 something. You can rebuild them with gaskets and the spring. There should be a model number on yours, care to post it? Something like SP711, SP714, etc.

www.arrowmotor.net

May 29, 2009 | Hayward SAND FILTER, PRO SERIES

Not finding what you are looking for?
Hayward SAND FILTER, PRO SERIES Logo

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1358 Answers

Bill Jordan

Level 2 Expert

372 Answers

john h

Level 3 Expert

12650 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...