Question about Computers & Internet

1 Answer

Why using Logitech with Skype people cannot hear me,only see me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Sep 13, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

yooperbud
  • 8637 Answers

SOURCE: Can''t hear voice of person I call using video Logitech 9000 cam

Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud


Posted on Feb 21, 2009

gymowner
  • 679 Answers

SOURCE: using logitech quickcam communicate stx & skype I can't hear the

How do you get the audio, headphones or speakers? if it's the speakers go into the control panel under sounds or audio, bring up the audio panel and see if you either muted or mistakenlly turned down the volume, that is done quite often by hitting that little speaker in the system tray, look there first. If you are recieving audio thru the headphones or the device itself check the cable they get dirty and sometimes just turning and pushing it in and out will fix the issue

Posted on Apr 30, 2009

jeyzie
  • 59 Answers

SOURCE: using logitech quickcam communicate stx

use a seperate mic.

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A NEW HP ALLIN 1 WIDOWS 8. ON FACEBOOK VIDEO CHAT THEY CAN HEAR ME, BUT I CAN'T HEAR THEM


Launch the Logitech QuickCam or Webcam software on your computer. Verify that you see yourself Logitech Webcam software window. Close the software window. Sign in to Skype. Click the "Tools" menu and select "Options." Click "Video Settings," check the "Enable Skype Video" and "Start my video automatically when I am in a call" boxes. Select your Logitech QuickCam from the drop-down list. Your webcam should display video in the window. Click "Audio Settings" if your QuickCam has a built-in microphone and select it from the microphone drop-down list. Check the "Let Skype adjust my audio settings" box in "Audio Settings" so Skype recognizes your microphone. Click "Save" to save the options for your audio and video settings. Skype will close the options menu.

Jan 28, 2013 | Logitech Quickcam Chat Webcam

1 Answer

Can't hear person when using skype and they can't hear me


i have a micorsoft webcam the person on the other end not hearing me but i am hearing tham

May 07, 2012 | Logitech Quickcam Chat Webcam

1 Answer

Using Skype with my Logitech QuickCam Pro 9000


The advantage of having a logitech webcam is the support you have.
I just launched my logitech toolbar and clicked on the lowest panel to see what help you have with your webcam in Skype - check this out

http://logitech-en-emea.custhelp.com/cgi-bin/logitech_en_emea.cfg/php/enduser/std_adp.php?p_faqid=9266&p_created=1227724918&p_sid=PlhfBfJj&p_accessibility=&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD00NCw0NCZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1Mb2dpdGVjaMKuIFdlYmNhbSBQcm8gOTAwMA**&p_li=&p_topview=1

Also there is a good logitech forum from other users as logitech tends to have teflon shoulders when it comes to chat programs

Sep 29, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

My friend can't see me but she can hear me. I can see and hear he


If you have a conflict with your printer - disable the printer during cam sessions
make sure your cam is configured to Skype
  1. Start Skype.
  2. On the Tools menu, click Options.
  3. In the navigation pane of the Skype Options window, click Audio Settings.
  4. Select your Logitech device as the default microphone. For example, select Logitech e3500
  5. In the navigation pane of the Skype Options window, click Video Settings.
  6. Select your Logitech device as the default Webcam. For example, select Logitech e3500
  7. Click Save.
  8. Test logitech by making a Skype test call.

Aug 24, 2009 | Logitech QuickCam Pro 5000 Webcam

2 Answers

I can hear the other person but they can't hear me


Well in SKype as i remember u have to select a Video device and a Microphone.. make sure u have the same camera selected for sound as well as for video

Aug 11, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Clear chat mic doent work


in skype go to tools>options>audio setting make sue the microphone is logitech and the green bars should start moving as you talk.
if no logitech appears or the mic is not producing sound. call logitech for warranty info. if the mic is producing sound below is "make a free skype test call" to see if the program is transmitting.

Jul 18, 2009 | Logitech ClearChat Stereo Headset Headset

1 Answer

Webcam - Recipients can't see me.


Hi,
I got this of Skype.
We are sorry to hear that you are having problems with Skype video.
Thank you for contacting Skype customer support about your video settings.
If you are using a Logitech webcam, please follow the steps below:
NB! To begin with please close Skype and make sure that you have unplugged the webcamera before installing the installation software that came with it.
1) Go to the control panel and open Add/Remove programs. Then from there uninstall any Logitech webcam software and Logitech webcam drivers from the list shown.
2) Download the latest drivers for your webcam from
http://www.logitech.com/index.cfm/405/&cl=roeu,en?prodcrid=405

3) Open the webcam installer package by double clicking it.
Now select: Custom installation (advanced) and click next. You are now given a choice whether you would like to install the software and drivers or just the drivers. Please select the second option (Logitech QuickCam drivers) then uncheck 'Enable VoIP Device Management' and click 'Next'. Accept the agreements and on the next page select 'I do not want to activate this Service' (Logitech destkop Messenger). Click 'Next' and the Logitech drivers should be installed. Restart your system and plug in your webcam. Your webcam should now be correctly installed.

Oct 31, 2008 | Logitech Quickcam Chat Webcam

1 Answer

Logitech Microphone Not working


Hi, I have a skype approved logitech headset. I can hear sound, but I cannot record sound or communicate on it. I cannot even find the headset as option as Preffered Device in Sound and Multimedia. I am using Windowsxp
z. Please help.

Feb 21, 2008 | Logitech (980174) Headset

1 Answer

Sound - no video


Both try using windows live and set up audio and video in the settings as you did with Skpe, as it's a similair programme and supports any camera. If that works better then Skype has a problem with your camera makes.

Feb 21, 2007 | Logitech QuickCam Orbit Personal Web...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...