Question about Kenmore 62622 Microwave Oven

1 Answer

Kenmore microwave model 665.69682992. I am attempting to replace the door on this model. I ordered the new door but find that the hinges are installed in the new door and cannot figure how to get the new hinges off or the old hinges off. Can you help? Doug Schmidt

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am looking to replace my Kenmore model 665.61612100 combination microwave with an updated model of the same size and specifications. Any suggestions???

Posted on Aug 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore microwave model 721 loose door


Loose bottom hinge - slide the microwave to the edge of the counter, and look at the bottom hinge - you may have to remove something to see clearly. Its likely you are missing a screw or the screws have worked themselves loose.

Jan 20, 2014 | Kenmore 62702 Microwave Oven

1 Answer

I ordered and received a replacement door for my 2002 spacemaker ge microwave. The lady I spoke with said I would be able to install it myself. I figured there would be directions in the box explaining...


HELLO.

Below is the solution to replace your microwave door.

Unplug the oven from the outlet and/or shut off the gas valve. Open the old door completely and unlock the hinges by pushing the hinge out toward you and down toward the door. Slightly close the door and lift the door up and toward you.


Install the new door. Make sure the wall oven door hinges are aligned to go into the rectangular wall oven slots. Place the hinges into the slots. The hinges should "catch" on the slots comfortably.


Ensure the door is fully opened and push the hinge locks into an upright position. The two hinge locks should rest on top of the two hinges that are inserted in the wall oven slots.


Close the door and open it several times to make sure the door is properly opening and closing. Replug the oven back into the outlet and/or turn the gas valve back on.

Thanks.

Sep 25, 2011 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

We need to change the door on our microwave. We have the new door, but can't find anything in the manual about removing the old door. It is a Frigidaire Gallery series above range microwave. Any...


The door should come off fairly easily. All you have to do on MOST microwave ovens is open the door all the way and lift straight up at the hinges. The door will come off the hinge pins.

On some models, there may be a small hinge pin on the top hinge that you remove, then lift up.

You may have to remove the grill panel above the door (if equipped) to allow for clearance for the door to come off.

If you have questions, please let me know. I hope you find this helpful.

Sep 05, 2009 | Kenmore 62622 Microwave Oven

1 Answer

I have a Kenmore model #721.89940490 The door handle broke off and need to replace it, I do not see any screws. how do I access the mounting screws.


You will probably need to take the MW down and remove the outer case to access the hinge for the door.

just received a new door assembly for my Kenmore microwave and spent about an hour searching for help with installation to no avail. , but managed to replace it by prying the small pin out with a flat head screwdriver and removing the door. I reused the pin (after straightening it), and it works great.

The door handle is secured with the two screws from inside of the door. In order to access them you have to remove the inner door frame. You can find how to remove it in the video clip from one of our previous posts.

Aug 03, 2009 | Kenmore 62702 Microwave Oven

1 Answer

Replacing microwave oven door


The door should simply come off by opening it all to way and lifting straight up at the hinges, The door will lift off the hinge pins. On some models you may have to remove the upper grill above the door (if equipped). If you still have questions, please let me know. I hope this helps you.

Jul 02, 2009 | Microwave Ovens

1 Answer

Kenmore mirowave # 72162643200 handle is broken


I have the exact same problem and the cost for a tech to replace the door is $80 less than buying a new one. They have to remove the unit from the cabinets and pull off the exterior box to unscrew the door hinge. Mine is only 3 years old. I also bought a new oven range. Never really use it. Decided it was time to use the self cleaning. It did not work. $280 to put a new board in. 4 months later I went to clean it and again it did not work. The f*^ing thing only cost $500. Decided Easy off will have to do. Kenmore s*&ks

As for the door... I very CAREFULLY used super glue/ gel and it did the job!

Mar 27, 2009 | Kenmore 62643 Microwave Oven

1 Answer

Kenmore Microwave door adjustment


Depends on the door. It likely can be adjusted they have 2 screws on the door bracket you may have to remove the cover to see them. But it also needs to be checked with a leakage meter to make sure its not leaking.

RadioShack used to make a low cost meter not certified or anything but a good way to see if its leaking.

Jan 08, 2009 | Kenmore 62622 Microwave Oven

1 Answer

Replacing the outer frame on a kenmore microwave door.


It's really not too hard.

The first piece of advice would be not to remove the door from the oven or tamper with the hinges. The alignment of the hinges is important to prevent microwave leakage, which can lead to burns and damage.

You can usually find exploded views and order parts by entering your model number here at the Sears parts site.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove.

Or you can watch a YouTube video (not a video I made) that demonstrates how it's done.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

c4f672d.jpg

Oct 08, 2008 | Microwave Ovens

1 Answer

Replace handle on microwave oven


The part number for a new handle is 820941 and costs approx. $19. If you already have the part and are wanting to install it follow these steps:

You can either do this with the door in place, or remove it. To remove it, you open the door all the way and push up at the hinges. The door should lift off the hinge pins.

1. On the back side of the door (the side that faces the interior of the oven) is a plastic facing around the perimeter of the glass.

2. There should be a series of slots or grooves around the facing that you can place a small screwdriver in.

3. Carefully (I cannot emphasize this enough) lift around the facing until it comes loose. You may not have to remove it all the way around the door. Sometimes you can gain enough access by lifting on the side where the door handle it mounted.

4. Under the door facing are the mounting bolts (or screws). Remove broken handle and install new handle.

5. Reinstall components in the reverse order as stated before.

If you are waiting to order the part for your oven, you can get it at repairclinic.com. The part will be shipped directly do you for a nominal shipping fee.

This should be a fairly simple repair that only takes about 10-15 minutes.

Again, be careful with the door. If you break it, a replacement door costs over $200! Good luck and let me know if I can help further.

Jan 18, 2008 | Microwave Ovens

2 Answers

Door Removal Sharp Microwave Model R-1611


The door comes off in a very simple way. Now...I'm speaking from the perspective of MOST microwave ovens. All you should have to do is open the door all the way to the left and lift straight up. The door has mounting pins that fit into a couple of hinge pin holes. If your oven is equipped with an upper panel grid, you may have to remove it, so the door will have more clearance. Putting the new door on is just as simple as lining up the pins in the door with the hinge pin holes and setting the door in place. Close the door slowly to make sure the pins are aligned with the holes properly. If not, the door will fall off while attempting to close. Let me know if this is helpful to you.

Aug 10, 2007 | Sharp R-1610 Microwave Oven

Not finding what you are looking for?
Kenmore 62622 Microwave Oven Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Chuck

Level 2 Expert

215 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...