Question about Dynex DX-L15-10A 15 in. HD-Ready LCD TV

1 Answer

The volume on the tv wont work and i have disassembled the back to look at the wiring but do not know where the volume wires are located. do you think you would provide me with some assistance?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Hi
The volume control on all digtial tvs are control by the main cpu electronicly , not by a pot as in older tvs. If you have no sound cheek if there is a speaker sw on the main menu if not does the set have a head phone connection , can sound be heard from this with a set of head phones, if so the speaker is faulty or the head phone socket might be dirty regards windyhouse

Posted on Sep 08, 2010

  • wgriffin_mon Sep 08, 2010

    there is no sound whatsoever, even when i plug in headphones to the headphone jack.

  • Derrick Buckles Sep 09, 2010

    Possible that set is switch to wrong sound sty ie for uk sound needs to be pal I and for french
    recption needs to be secam L . You should be able to change this in the with the remote control using the instalation menu. If this does not work then set will need further investation in a repair workshop. Sorry I cannot be of any more assistance with is fault regards windyhouse

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for off and on volume nob ?dont know where color wiers connect


before you replace it and remove the old knob , look at how the wires are connected and snip the so you have a little color showing. Now , with the new knob you just attach the wires back to the location they were in on the old knob.

Aug 13, 2015 | Radio Communications

1 Answer

Sl-db27u technics form the late 80's Ground Wire


I just checked my Technics turntable to be sure and there should be a thin black wire that comes out of the rear where the AC line cord connects. If you don't see a wire, someone may have clipped it off. You may have to disassemble you turntable enough to get access underneath and install a new wire.

Nov 30, 2013 | Technics SL-BD20D Turntable

1 Answer

Please tell me were the fuse is.


Hello,

The fuse can be located on the power supply board. To locate the power supply board, trace the microwave wire back into the microwave. The area where the microwave wire is soldered inside the TV is the power supply board. There is fuse on the board. So this means you have to disassemble the microwave....

Note that microwave store a lot of current, so unplug it and wait for about 30mins before your attempt disassembling it.

Regards.
Walesarumi

Sep 29, 2011 | Microwave Ovens

1 Answer

Please tell me were the fuse is.


Hi,

The fuse can be located on the power supply board. To locate the power supply board, trace the microwave wire back into the microwave. The area where the microwave wire is soldered inside the TV is the power supply board. There is fuse on the board. So this means you have to disassemble the microwave....

Note that microwave store a lot of current, so unplug it and wait for about 30mins before your attempt disassembling it.

Regards.
Walesarumi

Sep 29, 2011 | Magic Chef MCD1611ST Microwave Oven

1 Answer

Where are the fuses located on a 37 inch flatscreen magnovox?


Hello,

The fuse can be located on the power supply board. To locate the power supply board, trace the TV wire back into the TV. The area where the TV wire is soldered inside the TV is the power supply board. There is fuse on the board. So this means you have to disassemble the TV....

Regards.
Walesarumi

Sep 28, 2011 | Televison & Video

3 Answers

Why does my RCA TV cycle through channels on its own?


this is the same type of problem happening with other rca models and I know it is the EPROM CHIP but why this is failing is either because of design flaw , dirty enviroment that they were made in , to much voltage or current to the chip or too much of a draw from the chip causing it to fail . Or even a random frequency from the IR sensor or its circut I'm still investigating and testing.
leave the tv unplugged for at least 3 weeks durring this time resolder any solder that don't look good , I did this and it lasted for about 6 months(always plugged in to the wall) before it started doing it again. model # 27v412t

Oct 04, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Samsung LCD Flat Screen TV LN-S2651D - Volume Problem


I lived with it for about six weeks, then took the back off the TV. Just now it seems to be fixed, but I don't know if it will last.

I disconnected the wire leading to the channel up/down, volume up/down and source board, turned on the tv, turned it back off, reconnected the cable, and everything seems fine now.

Aug 24, 2008 | Samsung LN-S2651D 26 in. LCD Television

1 Answer

Samsung lns4041dx/xaa


Same problem with my set. The volume was either fully up, or fully down (usually down), and other controls didn't work- like I couldn't access the menus and could not adjust the width of the screen/aspect ratio.

I lived with it for about six weeks, then took the back off the TV. Just now it seems to be fixed, but I don't know if it will last.

I disconnected the wire leading to the channel up/down, volume up/down and source board, turned on the tv, turned it back off, reconnected the cable, and everything seems fine now.

Jun 03, 2008 | Samsung LN-S4041D 40 in. LCD HDTV

2 Answers

Speaker out connection


I've got the same speaker system and have had trouble with the satellite speaker jacks causing them to cut in and out.

I disassembled the subwoofer to get at the jacks and repair them by resoldering some loose connections.

What exactly do you need as far as wiring descriptions?

Oct 17, 2007 | Altec Lansing ACS 48 Computer Speakers

2 Answers

My Volume Won't Turn Up On My Tv


Most likely the Audio output IC is defective. Seek professional help.

Aug 28, 2006 | Zenith B32A34Z 32" TV

Not finding what you are looking for?
Dynex DX-L15-10A 15 in. HD-Ready LCD TV Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...