Question about Dell Televison & Video

1 Answer

My flat panel tv w5001c does not go on even though the power switch is green.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dell Master
  • 6,993 Answers

Hi,

your TV is having a power problem. The power supply board is defective that's why the TV won't power up. Its receiving power but it cannot transfer the current to the necessary part of the TV because a capacitor, diode, etc may have been faulty. Until these bad components are replaced, the TV might not come on.

If you know about TV repairers, I would suggest that you open the TV and read the power board/panel with a meter, detect the bad component and replace it. Take note that TV stores a lot of current that can shock, so leave the TV for a while before you open it.

If you don't know about TV repairers, take the TV to the nearest repairman to fix the fault for you.

I wish you good luck.

Posted on Sep 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba 32AV502R won't turn on even though green light goes on


Try changing the input device to something you are sure works. Switch off TV manually, switch off power, remove plug and retry after 48 hours. If problem persists, please refer it to a qualified service technician.

Jul 30, 2012 | Toshiba 32AV502R LCD TV

1 Answer

Tv is on, but no picture


Abbey, not sure exactly what part you need. But, I have used a company named ShopJimmy.com in the past with great success. I included a link to their site with your model page. Hope that helps!
TeeVeeMan2@gmail.com
http://www.shopjimmy.com/catalogsearch/result/?q=W5001C

Sep 12, 2011 | Dell W5001C 50 in. Plasma HDTV

1 Answer

Tv scream is blank it has sound,but no pictures


Switch off the TV Disconnect all the cables. Wait for some time. Connect all the cables. Switch ON the TV. It will work

Aug 02, 2011 | Dell W5001C 50 in. Plasma HDTV

1 Answer

Lost power cord, good place to order new one?


I would find a computer store, for a new cord for your TV. The power cords for the new flat screen TVs are many times exactly the same as your computer cord. Thanks for asking and show a few hands of support!

Mar 04, 2011 | Dell W5001C 50 in. Plasma HDTV

1 Answer

The television wont even come on....It just stopped. I have checked to make sure it is plugged in but it acts like it is not getting power?


Tries unplug,replug tv it back like about an hour.Letting the tv to resetting itself back to the fatory setting.The tv should work now,if not ur tv power supply board is dead.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement.

Dec 11, 2010 | Dell W5001C 50 in. Plasma HDTV

5 Answers

No picture or sound but it is on


i have a 50in plasma that just went out the other day the tv comes on but without pic and sound how can i fix it

Jan 24, 2009 | Dell W5001C 50 in. Plasma HDTV

2 Answers

It Turns on and I have audio and functionality, but no screen activity. The screen just stopped working. I have sound and I am able to turn on and off.


Most likely it is your y-board. I was able to order it from Coretronic in Taiwan. Email
charlesliu@cds.coretronic.com . I had to wire 263.20 for the part and had it delivered in about a week. My TV repair shop installed and now the TV is working great.

Oct 24, 2008 | Dell W5001C 50 in. Plasma HDTV

2 Answers

Dell w5001c 50 inch HDTV Plasma


power no video, is an indication of a bad panel. It usually requires changing the power board, and the panel. this supplies all boards to receive the proper voltage to correspond with each other to make the TV work again including the LCD panel. also the revision code and firmware needs to be current, to prevent future programming failures.

Oct 23, 2008 | Dell W5001C 50 in. Plasma HDTV

2 Answers

Dell 42" plazma tv


turn the tv with the rear cover facing you. power on the tv, look into the grills on the rear cover. If you happen to see 3 green lights together on the mainboard, you have communication signal. Otherwise, its the mainboard. If u get all 3, then its your Y main board and probably a lower or upper buffer, depending on where burn is located on panel board.

Jul 09, 2008 | Dell W4201C 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...