Question about Bosch 4000 - 07 Electric Table Saws

1 Answer

Need a rip fence - Bosch 4000 - 07 Electric Table Saws

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 490 Answers

Howdy, Here is the ordering page link with the rip fence (called edge guide, part number 2610997206 by Bosch) from Bosch:

https://www.boschtoolsservice.com/Search/QuickPartsOrder.aspx

I would recommend looking in a pawn shop or ebay as the rip fence is nearly 100 dollars as a replacement part.

Hope this helps a bit:)

Regards, Farmerbear

Posted on Sep 09, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
al_kupchella
  • 843 Answers

SOURCE: I need to re-align the rip fence. the Model

Here's an exploded view of the rip fence that comes with that saw. Perhaps you can see which bolts to loosen then retighten.

http://www.searspartsdirect.com/partsdirect/showSubComp.pd?imageUrl=http://c.searspartsdirect.com/lis_png/PLDM/P0102283-00003.png

Posted on Jan 27, 2010

rowdy45176
  • 2176 Answers

SOURCE: rip fence to saw blade alignment

I dont believe there are pictures, but what you need to do is move the fence to the blade, there are 2 10MM bolts on the backside that you need to loosen and then you can move the fence to square with the blade. Snug them down and move the fence and recheck let me know if you have anymore problems

Posted on Jul 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10 inch table saw rip fence 10amp made in 1990's ...need replacement


It would be nice to know who made that saw. There are companies that make replacement rip fences.

Nov 13, 2017 | Saws

1 Answer

Table saw blade alignment


Are you referring to the table top or rip fence alignment? The blade itself is not aligned. We adjust the table to parallel with blade and the rip fence should toe away from blade 0.01mm over the length of the rip fence to prevent binding.

Jan 14, 2014 | Delta Saws

1 Answer

Sawblade is not parallel with fence on delta tablesaw


The Rip fence SHOULD toe out aprox 0.010mm over the length of the rip fence to prevent binding. Adjust using the Rip fence to measuring rail. Should be adjusters there but if its an old saw, you may have to adjust the measuring rail where it meets the saw frame.

Jan 06, 2014 | Delta Saws

1 Answer

Rip fence is out of alignment..what do I need to do?


This is the fundamental problem with rip fences on table saws. I don't know what kind of rip fence you have, but most rip fences are adjustable for squareness. However, unless you have a very nice (and expensive) rip fence, they often don't self-align when you move them anyway. If you have the type that clamps at the front and the back of the table, the problem can be overcome by making sure the rip fence is straight before you clamp it in place. The easiest way I have found to do that is to use an adjustable square. Put the front of the rip fence where you want it, then set the adjustable square so that it matches the distance from the miter slot in the table to the fence. Then move the square to the back of the table and move the back of the fence to meet the end of the square. Now clamp it in place and check the front and the back one more time. It's tedious to do this every time you adjust the fence, but you can get a perfectly aligned fence this way. This method assumes that your blade is parallel to your miter slots, which is adjustable too, but you have to get underneath the saw to do that. good luck, Al K

Jan 14, 2011 | Saws

1 Answer

Rip fence to saw blade alignment


I dont believe there are pictures, but what you need to do is move the fence to the blade, there are 2 10MM bolts on the backside that you need to loosen and then you can move the fence to square with the blade. Snug them down and move the fence and recheck let me know if you have anymore problems

Jul 18, 2010 | Dewalt DW744S 10" Portable Table Saw with...

1 Answer

Need fence for radial arm saw


Most guys will attach a sacrificial particleboard sub top about 24" deep (per model) then towards the back of the saw attach a 3-4" square particle board rip, screw it down, then attach a 5/4 to 6/4 square maple fence approx. 4" tall and attach that to the 3-4" wide rip of particle board. then place a additional particleboard top in front of the maple fence. That will give you a 3-1/4" tall fence. all you would need to do is sqare it to the blade and attach it to the saw. Hope this helps

Nov 12, 2009 | Delta 10" Radial Arm Saw

1 Answer

After moving the table saw to a new residence i cant get the rip fence to line up with blade.i tried everything that was in the trouble shooting guide.


I am guessing it must be damaged beyond the adjustments. Are you sure the blade is aligned with the table? If not that could be the problem. I have most rip fences for craftsman belt drive saws available, Ebay 'Hokienpokie" or contact me via email, if you need another fence. Jim

Oct 05, 2009 | Craftsman Saws

Not finding what you are looking for?
Bosch 4000 - 07 Electric Table Saws Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Parson's Repair...
Parson's Repair...

Level 2 Expert

206 Answers

Jim London
Jim London

Level 2 Expert

257 Answers

Are you a Bosch Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...