Question about Pelco DX3100 Series 16-Channel 120GB DVR

Open Question

Pelco DX3100 Series 16-Channel 120GB DVR blinking lights

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: I'm looking to config a Pelco DX2000 Dvr with A cross-over cable

You can connect it to your PC directly with a cross-over net cable, and you also connect it to your LAN with straight net cable. Type The default address: 192.168.2.108:8004 in your IE after you set your pc address in the same geteway, you will see the user and PW requirement screen. if you can't get this screen,try to reset DVR to default setting. see Page#100 of its manual.

Posted on Aug 10, 2009

Ad
  • 2 Answers

SOURCE: I'm looking to hookup the DVR with the PC via A cross-over cable

I have 2 DX2000's, In order for you to communicate with your pc, you need a Crossover cable, if you have a laptop or computers, connect the crossover cable to that, set your ip address on your computer to 192.168.2.108, (Note: since you never configured it, this would be the default setting). If you have the manual this is in there.,

Another method, if you don't have a crossover cable is to set the ip on your computer to 192.168.2.110 Subnet, 255.255.255.0. its a little more funky, the crossover would be easier, once you get in, then go to the configuration page and setup up the IPaddess for the DX2000, the Gateway to your Router and the subnet mask, once you do this, then you're able to get to it on your network, by typing in http://xxx.xxx.xxx.xxx:8004 .

Posted on Mar 23, 2009

  • 2 Answers

SOURCE: i have pelco dx 2000

yes, on the configuratiion plage, use the schedule to increase the amount of time you want for

1) Sechedule recording
2) motion recording
3) event recording.

Remember, this is all based on the size of your hard drive and the number of camera you have installed.

Posted on Mar 23, 2009

  • 1 Answer

SOURCE: I have 6 pelco make 5104 dvr connected to a

We developed a unit called ThruLink specifically for Pelco Endura over a WAN. It simplifies the process of creating a VPN, and allows you to connect as many remote locations over any WAN connection into a single unified network.

You can view the product details on the pelco link below.

Pelco Endura over a WAN Simplified

Posted on Sep 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Delete video


Log in as admin and format the HDD will remove all recoded video.

Nov 22, 2011 | Pelco DX2000 Series 16-Channel 80GB DVR

1 Answer

Problem setting up Network Cameras


on the cameras them self there should be a adress and baud rate setting this should be the same as what you have on the software. also the cable that you have going back to your ethernet panel cannot be by any electric lighting or anything like that and check and make sure that the connetors that plug in to the panel have the right color code. you need to look for the straight through wiring diagram 568b. hope this helps.

Nov 11, 2009 | Pelco DX3100 Series 8-Channel 120GB DVR

1 Answer

Error when loading page from browser


Newer versions of Java does not work on Pelco dx2000. You have to use Microsoft's VM version of Java, which is no longer offered by Microsoft, but you may be able to find it somewhere. current Java (from Sun) needs to be uninstalled. this makes the computer compatible with DX2000, but not the Internet as is it today. Kinda sucks, eh?

May 22, 2009 | Pelco DX2000 Series 16-Channel 640GB DVR

1 Answer

I have pelco dx 2000 dvr of pelco brand i just want to know can i increase the recording days with new high rating hard drive from 90 days to 120 days


yes, on the configuratiion plage, use the schedule to increase the amount of time you want for

1) Sechedule recording
2) motion recording
3) event recording.

Remember, this is all based on the size of your hard drive and the number of camera you have installed.

Jan 14, 2009 | Pelco DX2000 Series 16-Channel 80GB DVR

1 Answer

I'm looking to config a Pelco DX2000 Dvr with A cross-over cable


You can connect it to your PC directly with a cross-over net cable, and you also connect it to your LAN with straight net cable. Type The default address: 192.168.2.108:8004 in your IE after you set your pc address in the same geteway, you will see the user and PW requirement screen. if you can't get this screen,try to reset DVR to default setting. see Page#100 of its manual.

Dec 26, 2008 | Pelco DX2000 Series 16-Channel 80GB DVR

1 Answer

I'm looking to hookup the DVR with the PC via A cross-over cable


I have 2 DX2000's, In order for you to communicate with your pc, you need a Crossover cable, if you have a laptop or computers, connect the crossover cable to that, set your ip address on your computer to 192.168.2.108, (Note: since you never configured it, this would be the default setting). If you have the manual this is in there.,

Another method, if you don't have a crossover cable is to set the ip on your computer to 192.168.2.110 Subnet, 255.255.255.0. its a little more funky, the crossover would be easier, once you get in, then go to the configuration page and setup up the IPaddess for the DX2000, the Gateway to your Router and the subnet mask, once you do this, then you're able to get to it on your network, by typing in http://xxx.xxx.xxx.xxx:8004 .

Dec 26, 2008 | Pelco DX2000 Series 16-Channel 80GB DVR

1 Answer

Hard drive not recognized


there will be bespoke dvr software on the drive, this would need to be transferred to the new drive. there may be bespoke formatting as well, check the makers web site

Nov 27, 2007 | Quad 16 CHANNEL STANDALONE 120GB DVR WITH...

1 Answer

Problem in keypad


If you are using a USB Keyboard then get a USB to PS2 converter....Some times the DX8100 doesn’t recognize all USB Keyboards....Here are the links to the manuals you have requested
http://www.pelco.com/products/default.aspx?id=537

Let me know if this helps,

cbinny1

Nov 26, 2007 | Pelco DX2000 Series 16-Channel 80GB DVR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pelco Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Pelco Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...