Question about Shure PG48 Consumer Microphone

2 Answers

How can i connect to a dvd recorder. what is needed from microphone to recorder.

Posted by on

  • robert393 Sep 08, 2010

    basically i am recording a live ice hockey game and adding comments( play by play) , so the coaching staff can watch the game with my notes . my location is approx. 20 feet from the camcorder, i am about 5 feet from the dvd recorder.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

Basically what you need is just a cable that will connect the mic to the camcorder .

Posted on Sep 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

I just need to know the idea of what you are doing. Your reply will help me to give you a clear solution to your problem.
Are you trying to record a video and put a sounds with it through the microphone that is connected to the dvd recorder?

If that is what you are doing then what you need to have is a small microphone mixer. Why will you need this? The DVD recorder standard audio input jacks are designed to have a certain minimum amount of signal. And a lone microphone cannot supply the required signal for the dvd recorder. You will not here it from your record. The microphone mixer will amplify the signal from the mic so that you can record it. This has built-in amplifier and volume control.

Connect the mic to the mixer. The audio output of the mixer should be connected to the audio input of the dvd recorder.

If the microphone mixer is not stereo, just connect the two DVD recorder audio inputs to a single cable with a Y cable.

Please give this answer a good ratings if the solution works with you.
Thank you for using Fixya.
Alp

Posted on Sep 08, 2010

  • Danilo Baraquiel
    Danilo Baraquiel Sep 09, 2010

    From your position right now, I think it was the best to have a separate microphone attach to a microphone mixer and that the audio out will be connected to the audio in of the dvd recorder. Theres no way that the mic of the camcorder will be able to record your voice at that range.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I use a hand held stereo microphone to record via a Denon F101 tape deck


You really need to include all brand and model number info for this question.

Feb 03, 2015 | Denon Audio Players & Recorders

Tip

How to record Guitar sound on a computer


<p>Line-in <br /> <p>1. Buy a software package for recording music, if your budget allows. Recording music software is specifically designed for recording musical instruments formed. He cannot offer features found in common software audio. Alternatively, an audio recording program for free to get the music recording software than your needs and budget. <br /> <p><br /> <p>2. Buying a guitar cable to your computer if you use an electric guitar. Connect the larger end of your guitar amplifier and the small end into the computer microphone / line-in. <br /> <p><br /> <p>3. For an external microphone when a traditional guitar. Plug the microphone into the computer microphone / line-in. A stereo microphone is a natural sounding audio file, due to the dual microphones. <br /> <p><br /> <p>4. Open your audio recording program, which recognizes the device connected to ensure the microphone / line-in. Pull the cord, again if it does not recognize the device. Change the settings for the recording program to your needs to adapt, you can file type for quality change, and the recording is mono or stereo and audio level. Press the Record button, then started playing guitar. <br /> <p><br /> <p>5. Press the "Stop" button when you finish the game. Some programs can automatically be prompted to save the file; others may be the audio file first. Press "control" and saving "S", if not prompted. <br /> <p><br /> <p>Digital recorder <br /> <p>1. Buy a stand-alone digital recorder, if you do not want a guitar cable or an external microphone. A stand-alone digital recorder is small enough to fit in your pocket and can be placed anywhere without the need hampered by a cable. <br /> <p><br /> <p>2. Set the digital recorder on a flat surface. Press the record button. <br /> <p><br /> <p>3. Press the digital recorder, "Stop" when finished. Connect the recorder to the computer with data cable. Open the device by clicking on "Start" then "Computer" and double click on the recorder in the "Removable Devices". Copy the file from the recorder to your computer. Turn off the burner when you are ready to save battery power.<br />

on Jun 21, 2011 | Computers & Internet

1 Answer

How to connect microphone at the back of the recorder


This recorder doesn't have a microphone input.

What are you actually trying to do?

Sep 19, 2013 | Panasonic DMR-EH55 DVD Recorder/HDD...

1 Answer

Microphone not working


Hello Weber913,
Below are steps to troubleshoot and resolve your microphone issues. If you have any further questions you can email at my email address listed below.

Test the Microphone

  1. Click Start, point to Programs, point to Accessories, and then click Sound Recorder.
    In Windows XP, you will need to select Multimedia (or Entertainment).
  2. Click the Record button, and speak into the microphone.
    The green waveform should react to your voice.
  3. To end the recording, click Stop.
  4. To hear your recording, click the Play button.

Check physical connections

  1. Verify that the microphone is connected to the red microphone jack for the sound card on the back of the computer and not the microphone jack for the modem. The microphone will not record if it is connected to the Mic jack on the modem.
  2. Test the microphone on another computer using Sound Recorder as in Step 1.

Check the volume control and mute properties.

Double-click the Speaker icon in the System Tray.

  1. Make sure the Volume Controls (or Master Out controls) are at least midway on all levels.
  2. Make sure there are no checks in the Mute boxes.
  3. Test the microphone using Sound Recorder as in Step 1.

Set Recording to Mic/Microphone

  1. Double-click the Speaker icon in the System Tray
  2. Click Options in the menu at the top of the window.
  3. Click Properties.
  4. Choose Recording in the Adjust Volume For section. Do not choose Playback in the Adjust Volume for section. Choosing Playback in conjunction with unmuting the mic may cause loud feedback during recordings.
  5. Ensure that Mic/Microphone has a checkmark next to it.
  6. Click OK.
  7. Test the microphone using Sound Recorder as in Step 1.

Reinstall Sound, Video and Game Controller Drivers

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System and then click the Device Manager tab.
  3. Click the plus (+) sign next to Sound, Video and Game Controllers.
  4. Click each entry one at a time and then click Remove, repeating the steps until the Sound, Video and Game Controllers category is removed.
  5. Close all open windows.
  6. Reboot the computer.
    The sound card will be detected and you will be prompted to reinstall its drivers.
  7. Test the microphone using Sound Recorder as in Step 1.
Thank You,
Dell-Jesse L
Dell Social Media and Communitie
email jesse_leonard@dell.com
td.Header1 { FONT-WEIGHT: bold; FONT-SIZE: 17px; COLOR: #000000; padding: 12px; background-color: #ccdbeb; border: #ccdbeb solid 1px; text-align: center; width: 20% } td.Header2 { FONT-WEIGHT: bold; FONT-SIZE: 17px; padding: 12px; color: #000000; border: #ccdbeb solid 1px; text-align: left; }

Apr 24, 2013 | Dell Vostro 2510 Notebook

1 Answer

How to connect Hitachi camcoder with laptop


Connecting to PC via PC Connection Cable
Use the provided PC connection cable to connect the DVD video camera/recorder to PC as shown in the last.

Note:
• No data can be written to the HDD, disc or SD memory card in this DVD video camera/recorder when it is connected to PC.
• The PC connection cable does not supply power to the DVD video camera/recorder: Use the AC adapter/charger
to power the DVD video camera/recorder.
• Before connecting the DVD video camera/recorder to PC, disconnect any cables or camera accessories (external
video flash, external microphone, etc.) other than the PC connection cable and AC adapter/charger.
• When connecting the DVD video camera/recorder to PC, the ACCESS/PC indicator will light green. While HDD or
a disc is being accessed, the indicator will light or blink orange. While an SD memory card is being accessed, the
CARD ACCESS indicator will light or blink red.

If you connect the DVD video camera/recorder to PC via PC connection cable, the PC will automatically recognise the DVD video camera/recorder. After recognition is finished, it may be
prompted to restart the PC: In this case, follow the instruction and restart the PC.
3_11_2012_6_33_12_pm.jpg

Mar 11, 2012 | Hitachi Video Cameras

1 Answer

My microphone is not working. What do I do? Trying to use Skype, but microphone want work


Hi ldlw65,

Please follow the below steps to set up your microphone properly :-

  1. Firstly check if your microphone's cable is in proper order, if it has been damaged, then it's that physical fault which stops microphone from working.
  2. Now if the wire or cable of microphone is OK, check if you have connected your microphone in the correct slot , in your motherboard , usually there is a sign of mic besides the microphone slot.
  3. Then check for the control panel's sound and audio devices option , by going in your control panel, if you open it and go in the audio tab you should see your recording device as enabled.
    If it's disabled then you need to install your audio driver's again.
  4. Now , if everything is ok till here , all you need to do is do a microphone check by going to sound recorder (start >programs>accessories >entertainment>sound recorder )in windows xp , in case you are using windows xp or any relevant software in the other operating system which records audio.
  5. Once you have the application like sound recorder try speaking on mic while you activate the record option , if you see that your sound is being recorded, then your mic is functioning properly, if it's not then you need to check if your mic is the current recording device.
  6. To check if your mic is the current recording device , all you need to do it double click on the volume icon on your task bar and you will have volume control box open , then you need to go to the options menu and choose properties.sajjad4help_2.gif
  7. After you choose properties you will have a radio button for recording , select it and you will find devices for recording , then make sure microphone is selected and click ok.sajjad4help_6.gif
  8. After you select ok , then you need to select microphone from the recording options to activate recording via your microphone.sajjad4help_7.gif
Now you should be able to use your microphone properly without any problems.
Your feedback would be appreciated.
Hope this helps ..)

May 13, 2011 | Toshiba (P000257700) Microphone

1 Answer

Does my Sharp DV-RW34OU dvd recorder+vcr have microphone capability? If so can I purchase a compatible microphone online?


Ur Sharp DVD Recorder/VCR combo have any HDMI ports.Yes,Tries websites like Amazon.com,Ebay.com to buy a Digital microphone use the HDMI port it work fine.No tries researches buy the analog microphone.Just ask the vendors info.for the device functionable or compatible to ur device.

Jul 03, 2010 | Sharp DV-RW340U DVD Recorder/VCR

1 Answer

How do I convert or transfer movies from a video cassette to a digital format using the Sony DCR-PC9 camera?


There are 2 ways,
Connect your DCR-PC9 with computer via iLink/ DV/ IEEE1394 (all are same thing) cable and transfer digital movie data in computer. (DCR-PC9 is digital camcorder)
Or connect your camera with DVD Recorder and burn DVD.
Thanks.

Aug 13, 2009 | Sony ECM-DM5P Consumer Microphone

1 Answer

Backpanel socket for microphone is not recognised. Speaker socket is alright.


in order to hear sound on the microphone you need to check the Mixer settings as the default setting for microphone (for playback) is mute as you would get some horrible feedback..

double click on the speaker icon in the bottom left and chose properties from the options menu you may (or may not) have the option to select microphone for playback, however there should be a setting for recording which should give you a slider to set the recording levels for the microphone, use sound recorder or other recording software to test microphone is working

Apr 13, 2009 | Intel Motherboard

Not finding what you are looking for?
Shure PG48 Consumer Microphone Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shure Audio Players & Recorders Experts

Ben Armstrong

Level 2 Expert

334 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Shure Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...