I need to set the time and date and cannot find where ?

Turn on the [Date Stamp] setting in the [Rec] menu. See page 83 of this manual.

I'm taking it that you are running system 10 so go to system preferences under the apple menu, then go to date and time under System. Go to time zone and allow the time zone to be set automatically and then go to date and time and set the date and time automatically. If you want to set the date yourself you can uncheck the set date and time automatically and then select the date and then the time using the up and down arrows. Hope this helps.

To set the Date and Time on your computer - go into the BIOS configuration then to Date and Time to set the correct Date andTime.
If the Date and Time needs setting up again after to boot up the computer again, then the BIOS battery needs replacing because the old battery is flat and cannot maintain (store) the Date and Time.

1. Tap Menu > Settings > Phone
2. Tap Time & Date.
3. Tap Time Format, Date Format or Auto Update > Save

It's best to keep it set to Auto Update so that it takes the network time and updates for DST changes.

Hope this helps. If so, please consider rating this solution.

-best regards,
M

The date/time setting process may be slightly different on different camera. Which camera do you have ? Nevertheless, you first need to set the date/time on your camera. And when you print, say using PictBridge, you need to set the DPOF date setting at WITH DATE. And you need to use a printer that supports date printing.

To set the date and time, do the following:

1. Press function 7
2. Press 1
3. Press SET
4. Enter date and time using 2 digits for month (sept 09)
5. Enter 2 digits for Date
6. Enter 4 digits for year
7. Enter 4 digits for time (military time ex: 3pm 1500)
8. Press SET
9. Press STOP

The date and time are now set. Best of luck.
Greg

the best info that i can provide is to download ur user manual.

after that search for time and date in the PDF.

quote form nanual:


time & date
Your phone uses the time and date for the
Datebook.
To synchronize the time and date with
the network: Press a >wSettings
> Initial Setup > Time and Date > Autoupdate
> On.
To manually set the time and date, turn off
Autoupdate, then: Press a >wSettings
> Initial Setup > Time and Date > Time and Date.



manual

http://www.motorola.com/mdirect/manuals/V3i_9504A48O.pdf

plz give

Setting the Date and Time The date/time needs to be set if/when: Camera is turned on for the first time. Camera is turned on after leaving ViviCam X60 without the battery for an extended period of time. When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time. 1. Slide the mode switch to [replay ], and press the MENU button. 2. Select [Setup2] with the LEFT ARROW button. 3. Select [Date/Time] with the UP ARROW / DOWN ARROW buttons, and press the SET button. The Date/Time setting screen will be displayed:[Setup] [Format], [On/Off]. 4. Select [Setup] with UP ARROW / DOWN ARROW buttons,and press the SET button. Select the item’s field with theLEFT ARROW / RIGHT ARROW buttons and adjust the value for the date and time with the UP ARROW / DOWN ARROW buttons. The date and time is displayed as the format you set. The time is displayed in 24-hour format. After confirming all settings are correct, press the SET button. The setting will be stored and the screen will return to the Setup2 menu.

Go to the link below. You need adobe acrobat to read. THere is a section in the manual called "Adjust Date & Time"

For Date:
Put Calculator on RATE SET
Press Time/date key: enter the date using a decimal between the month, day and year (all 4 digits) please the date/time button. It should reset. (Exmple: 01.16.2009)

For time:
Leave Calculator on RATE SET
Press Time/Date key until time shows up. just like date, press the hour then the decimal then the minute. (Example if the time is 10:15 you enter 10 . 15) Press the Time/Date Key and the time is set.

This link is the manual:
http://www.sharpusa.com/files/cal_man_EL1750PIII.pdf

time & date
Your phone needs the time and date for the datebook.
To synchronize the time and date with the network:
Press - > Settings > Initial Setup > Time and Date > Autoupdate
> On
To set the time and date: Press - > Settings > Initial Setup
> Time and Date > time or date.
To choose an analog or digital clock for your home screen,
press - > Settings > Personalize > Home Screen > Clock > Analog or
Digital.

hope this helps

riz.