Question about Computers & Internet

1 Answer

I can install the camera its not working - Computers & Internet

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or

Posted on Sep 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why do not detected my web ***


Hello!
There are several causes to camera not detected error. Are you sure your camera is installed at all?
Let's see because we have to uninstall it anyway: Start>Control Panel>Uninstall a Program
See if your camera is in the list
  • If yes: click on your camera name in the list and then click Uninstall/Change. When done, restart your computer.
    Please, make sure your camera model is supported by your Operating System:
    1. See which is your Operating System: Start>double click Computer>Properties and the first in the list is "Windows Edition" under which you can see which is your your Operating System.
    (Also run Windows Update/System Update which u can find by typing one of those into Start search box+Enter. If any updates available, install them and restart computer.)
    2. See your camera System Requirements: go to your camera's manufacturer's website, Click Products, choose your product and model, and they see your camera System Requirements. Which Operating Programs your camera works with? Do you use one of those?
    • If yes, then your camera can work with your Operating system and you do not have to change it.
    • If not, then your camera cannot work with your Operating System. Sometimes it works if we run update camera driver (only after installing the camera): Start>right click Computer>Manage>Device Manager and find your camera in the list, right click on it, click Update. When update done, and if updated, restart your computer. Go to Installing a Webcam.
  • If you do not find your camera in Control Panel>Uninstall a Program, then your camera is not installed on your computer. Go to Installing a Webcam.
  • Installing a Webcam: Insert camera driver CD, plug your camera if prompted, run Driver icon from the CD, Continue/Allow, and finish installing. Unplug your camera and restart your computer. I would also recommend checking for camera driver update (see above). When update finished, and installed updates, then restart your computer.
Regards!

Jun 25, 2011 | Logitech Computers & Internet

1 Answer

Sony vaio tz21wn built in camera not working my operating system windows 7,can u help:}



Once you have your camera, you then have a choice to make; whether to install the software and drivers that comes with the camera or not. A driver is a special piece of software that allows your computer to communicate with the camera. Many of the newer cameras are UVC, (Universal Video Class) compatible. This means the camera can use standard drivers which are built-in to your operating system (Windows, Mac OS, and Linux) and you don't have to install the drivers that come with the camera. However, some features of the camera may not work without the drivers that come with it. Which features work, depends on the camera. For example, some of my auto focuses cameras won't auto focus using the UVC driver, others will. Some cameras have various resolutions that aren't available without installing the drivers that come with it.


Some time it would be work or not. So install your web cam driver is the best way to get all the features.


Thanks

May 15, 2011 | Computers & Internet

1 Answer

Motion EYE camera will not work - Sony VAIO VGN-FJ270/B Sony VAIO® VGN-FJ270/B


If the Camera Driver in the Computer is missing, the Motion Eye Camera will not work.

You will need to re-install the Camera Driver for the Camera to work.

You can download the Camera Driver from here

Download the Camera Driver to a folder in the Computer, the open the folder where the file is downloaded. After that, double click on the file to begin the installation. Please follow the onscreen instruction to complete the installation. After installing the Driver, restart the Computer. This should fix the issue and the Camera should work normally.

Best of luck.. !

Aug 07, 2010 | Sony VAIO VGN-FJ270/B Notebook

1 Answer

I have cannot get my camera to work on my computer. the mic works fine the other party does not receive picture of my talking


Hi.

You need to install the camera software BEFORE connecting the camera USB cable, or Windows will install its default drivers.
Please try disconnecting the camera, eventually removing the camera from the installed devices list in control panel, then reinstalling the camera.

Feb 09, 2010 | Computers & Internet

2 Answers

Labtec webcam not working why i did every thing my computer not detecting this ****** i install all the posible drivers already i used window xp. I hate this man.


ok, uninstall all related drivers to this camera,


Now using the supplied disk install the camera software but please do not connect the camera YET, if the camera is already connected,
remove the camera and reboot,

so you installed the camera software now plug the usb camera in, it will now detect the install camera software and work.

Regards
gewiz.

Dec 05, 2009 | Labtec 961307-0914 Webcam

1 Answer

Camera worked ok on XP new computer cannot load


Try This Software: "Driver Genius" After Installed Plug In Device (Camera) Click SCAN And Install Drivers (note u can chose whichever drivers u want to install), Very Easy To Use Software

Nov 21, 2009 | Logitech QuickCam Express Web Camera

1 Answer

I need a Vista driver for the jl2005a toy camera


Install the 2000/XP drivers that come with the camera. I've just installed these, from CD, on a Vista laptop. Rebooted ... then connected the camera ... and it works! :-)
The "PCCam" app that's installed works and the camera works with Skype, too.

Jan 14, 2009 | Micro Innovations Photocam 3120 Digital...

1 Answer

Camera won't connect


I had the same problem. The driver did not install correctly. I then connected the camera without the memory card in, and the driver installed correctly. Subsequent connections of camera with memory card installed, worked fine.

Nov 18, 2008 | Canon Powershot A1000IS 10MP Digital...

2 Answers

Connection between camera and computer


What operating system are you using? Is you camera connected via USB? Have you tried using another USB port? Did you make sure to install the software before plugging in your camera?

Generally if you are running Windows 98, you will need to reboot after installing the software to even have a chance of the camera being recognized correctly.

If you are running Windows 2000, XP or Vista, the camera should be recognized and a driver installed or searched for from the CD software you installed before plugging in the camera.

Sometimes if you plug in the camera first without installing the software, the PC finds a new device with no driver. You can see this by going to Control Panel -> System -> Hardware -> Device Manager and you should see and exclamation on a device in the list. You need to remove this item and reboot your PC.

Now install the software first and when the install is done, then plug in your camera. Generally this works out pretty well.

Apr 29, 2008 | Canon PowerShot A80 Digital Camera

1 Answer

Please help me


When you say 'It keeps saying that the camera is marked for deletion.', where are you getting this message from? Check device manager to see if you can remove the device successfully.
Do you have admin priveleges to install on your work system? If not, the device drivers may not be properly installed.If you have XP at work, uninstall the Kodak software, then try connecting the device. You can see the camera as a mounted volume through the system drivers.
You can install just the EasyShare software, not requiring the camera drivers, if you choose to, and the camera will still mount successfully.
Good luck!


Jan 02, 2008 | Kodak EasyShare DX6340 Zoom Digital Camera

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...