Question about Video Game Consoles & Games
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: atari 2600 fuzzy screen
Hello, Are you using a newer flat panel or and older TV? IF you are using a newer TV the picture will never look very good. IF not, did you try working with the RF adapter? Check all connections. If all else fails try to get another RF adapter to see if that helps. I remember this being a bit problematic even when these were new. Wish I had a definite answer for you! Good Luck - Dr. Know
Posted on Dec 23, 2007
SOURCE: 2600 atari
To connect your Atari to your TV, you'll need to get a "phono to f" adapter. These are available at RadioShack (part no. 278-255) for about $5.00 This adapter takes the phono plug from the Atari and changes it to a standard coaxial adapter. If your HD TV doesn't have an input for standard cable wires, you'll need to get yourself an RF modulator to switch the coax to RCA. If you have an old VCR with an unused cable input, that will work as well.
Posted on May 29, 2008
SOURCE: Atari 2600 Console Power Adapter
The Atari 2600 adapter has the following information on it:
Input: 120V AC 60Hz 12W
Output: 9V DC 500mA
Make sure you test the power supply before you use it. I have 2 original atari power supplies, and they are both putting out about 15V DC, which may be why my atari's aren't working anymore!
Posted on Jun 17, 2009
The signal is output at 56MHz or 60MHz depending on the channel you use. Normal tv is around 350MHz to 700MHz so you need to got to the bottom range to tune. Also check that the contacts of the game catridge are not black looking, if so clean with some alchol to remove the soot build up, this will make sure the screen is outputted in proper format.
Posted on Aug 08, 2009
Tips for a great answer:
Mar 14, 2008 | Video Game Consoles & Games
Jun 17, 2011 | Atari 2600 Console
Mar 20, 2011 | Video Game Consoles & Games
Aug 18, 2010 | Atari 2600 Console
Feb 28, 2010 | Atari 2600 Console
Aug 08, 2008 | Atari Video Game Consoles & Games
Jun 17, 2008 | Atari 2600 Console
Feb 05, 2008 | Atari 2600 Console
Dec 25, 2007 | Atari 2600 Console
55 people viewed this question
Usually answered in minutes!