Question about Hayward HSeries Natural Gas Pool Heaters 400000 BTU

1 Answer

Hello Tech's. I have a Hayward H400IDL pool heater and I have a problem with the right lower connector on the printed circuit control board. The 4-wire connector must have had a poor connection and melted the connector and the plug that was soldered on to the printed circuit and fried the board around the connection. So I am looking for a control board and the connector with wire pigtails. Thank you, Peter Kjellberg.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 990 Answers

You can find manuel's at this site,
http://www.haywardnet.com/inground/products/manuals.cfm
Then you can find your part and part number. Armed with this you can order your part through your local pool store or a web site like Leslies.com and they can ship directly to you.

Posted on Sep 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Hayward H400IDL2 heater I recently had #1 and #2 1.5 amp fuses blow. I replaced them and then the #4 2.5 amp blew so I replaced it. When I press the mode button to spa the heater blower comes


Good Day, missed your post for a few days. #1 & #2 fuses are on the high voltage side. This could mean a problem with incoming voltage or a bad fuse or main circuit board. Call our tech line at 908 355-7996. I have attached a link to the manual. http://www.hayward-pool.com/pdf/manuals/H-seriesLowNOx-H250IDL2-H350IDL2-H400IDL2.pdf

Aug 24, 2014 | Hayward H400idl2 400,000 Btu Low Nox...

1 Answer

H400IDL Hayward Pool Heater. Ours is dead. Any suggestions on what we need to do to fix it? FS, BO are our error messages.


BO is bypass operation fault and FS is temp.sensor failure. It is recommended that you contact a pool professional to fix this. If you are in the Phoenix Metro area you can contact me at info@wefixuglypools.com

Dec 28, 2010 | Hayward 250kbtu Ng Pool Heater - Inground

1 Answer

I have a hayward h series lp gas heater. 14 months old. Came home today and no LED lighting up and no heat on when water is flowing. Checked circuit breaker at box and there is good power. System has never...


Check power into and out of the transformer...power issues can cook a transformer quickly causing your issue. If low volt side of transformer is ok you will need to check the control board.

Even though the heater is technically out of warranty you may want to have a tech look at it and see if they can still get any parts needed covered.

To find a Hayward authorized tech in your area, enter your zip code and then select repair as the purpose of your search on this web page.

Dec 09, 2009 | Hayward H Series Pool & Spa Heater...

1 Answer

Error code CE on hayrwrd pool heater h series


This is the 3rd time I have had this same problem. First two times they replaced all the circuit boards under warranty. It seems as if there is an inherrent design flaw with this heater. Reseating cables on both of the last two times seemed to fix the issue. However the tech replaced the boards anyway.

Apr 12, 2009 | Hayward H Series Pool & Spa Heater 400k...

2 Answers

Pool Heater will not light. (Flashes AO)


If you hear the blower come on, then you have an air sensor problem. Hopefully the air hose popped off, or has cracked...If not then you will probably neet to replace the air pressure switch.

Mar 15, 2009 | Hayward 250kbtu Ng Pool Heater - Inground

Not finding what you are looking for?
Hayward HSeries Natural Gas Pool Heaters 400000 BTU Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1363 Answers

Bill Jordan

Level 2 Expert

372 Answers

john h

Level 3 Expert

12650 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...