Question about Fuji FinePix S6000fd Digital Camera
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fuji Finepix Z1 Zoom Error
i had the same problem with my z1 camera aswell
and it got really frustrating so i tried different things, like turning it off and on again, taking the battery out etc
but i think ive found the solution to this problem,
when you turn it on you get the zoom error grrr
what i did was open the slide and as the camera is turning on hold down the 'take picture' button at the top and the camera is like normal
it worked for me anyway
hope it works
Posted on Jun 26, 2008
SOURCE: ''focus error''
Hi Minoo I to have had focus error problem with Fuji A310 camera and after much frustration and phone calls i decided to try a different approach to this problem........ I FORMATTED my 64mb XD card in my computer card reader using the FAT setting and guess what my camera is magically working now..... Why couldnt FUJI helpline have told me this when i spoke to them, answer because they were to preoccupied in trying to sell me a new camera!!!!! Why is it called a HELPLINE then should rename it "FUJI RESELL LINE" hey.... Also formatted 16mb card same way and working also, maybe i should get a job at FUJI hey only problem is i wouldn't endorse there products, very good picture quality in an unreliable package..suggest any better brand for next time Minoo? SANDERSON
Posted on Aug 26, 2007
ha right now i have the same problem and like everyone else i havent dropped it or damaged it.
Fuji being awesome as they are wont cover this in warranty and its about $230 + to get it fixed and reportedly comes back with more errors than before
so how about you try what i'm about to do and smash it with a hammer, in future try canon or something else.
I am now a photographer without a camera for two months my camera is barely a yr old.
Thank you fuji!!!
Posted on Mar 03, 2008
SOURCE: focus error
You will have to disassemble the unit. 2 screws on 1 side and 1 on the other and 2 on the bottom, pop the back off, being careful of the 2 ribbon cables attached to the rear and unock these cables and remove. 3 screws holding the top circuit board (remove the eye piece first and unplug the 2 cables attached to it) carefully unplug all cables attached to this top board and unscrew and remove (there is one on the bottom of the board that you must flip to unlatch. After you remove that board there is the power board... BE CAREFUL!!! The flash capacitor (the black tube looking unit on the bottom of this board) stores chrge and you WILL feel it if you touch the terminals... it they touch metal you will see fireworks so be careful. unplug the single red and black wire plug and unscrew the 3 screws here You do not have to remove the white plug with the 4 or 5 wires because you can just flip the board over out of the uni.. BE CAREFUL!!. unscrew the 2 silver screws securing the metal plate underneath and remove this plate. now remove the single screw left and pull out the lens assem. Here check 2 places... 1 is he zoom screw (it is behind the long silver panel) and also the focus screw (behind the shorter metal panel. Do one at a time. remove the screws from one of them and carefully lift off the motor plate. for he zoom line to metal ring on the screw into the groove of the lens (Shaped like a V) carefully screw the screws back in bu d ni tighten to tight, leave a LITTLE slack. (1/8 turn from tight). Now for the focus screw, remove the cover and align the ring to encase the top of the V The ring is shaped like < the lens is a > so just allow the rinng on the screw to "pinch" the top of the lens groove. secure like you did the other plate (dont forget to back out 1/8 of a turn) reassemble the opposite of disassembly and you are done... it look hard but it is actually pretty easy... any uestions email me at email@example.com
Posted on Feb 21, 2009
SOURCE: fuji finepix f50 camera was
Unfortunately dropping this model, and the f40, 45, 47 fd models, is suicidal for the camera. The lens has an inner slide ring which other models do not have and this ring has three lugs to keep the lens from spinning when powered up and used. Unfortunately these lugs are also clips which hold the focus lens inplace. These are tiny. hard to repair
Posted on Mar 08, 2009
Tips for a great answer:
Feb 02, 2010 | Fuji FinePix S6000fd Digital Camera
Jul 09, 2009 | Fuji FinePix S6000fd Digital Camera
Jul 05, 2009 | Fuji FinePix S6000fd Digital Camera
May 15, 2009 | Fuji FinePix S6000fd Digital Camera
May 24, 2008 | Fuji FinePix A500 Digital Camera
May 13, 2008 | Fuji FinePix A500 Digital Camera
337 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: