Question about NetGear WNDR3300 - RangeMax Dual Band Wireless-N Router

1 Answer

I have the NETGEAR WNDR3300 - RangeMax Dual Band Wireless-N Router and i can not get an internet connection through the router on my laptop wirelessly. My ps3 set up to it wirelessly just fine and the laptop works just fine wired.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser

window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router

status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set

up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to

access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model

router
9. cell phones, cordless phones, digital TV's, can affect the data signal

from a router. Also distance from the router can be a factor. If your

router is in a basement place the router to a upper floor and center it in

the room.
*************************************************************

Gaming router setup steps:

1. Check for current anti-virus before doing step below.
2.Check firewall allowances or permission to be sure game is allowed
3. Try "port forwarding
4. Check the game / verify ports need for multiplayer gaming.
5. Please forward all ports UDP/ TCP To gaming computers IP address.\
6. Log in to router and place gaming computer in to DMZ.
7. When done gaming disable the game in the DMZ.

Posted on Sep 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn off mac filtering on my netgear wndr3300 rangemax dual band router through my computer/


MAC address filtering is configured in the wireless settings.
Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 24, 2011 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Netgear dualband wndr3300 - Why can I only connect to one band


Dual band means it is working on both 2.4Ghz and 5Ghz frequency. If your computer can connect on both frequency that only means that the wireless adapter in your computer is also dual band.

Jan 26, 2010 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

How do I connect my Arris TM502G to my Netgear WNDR3300? I go through the setup and it says error cannot connect to the Internet. I need help.


Hi,

Please let me know who is your internet service provider(ISP)
then i can give you instruction how to setup router

Happy to help
Thanks for using Fixya

Jan 17, 2010 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Needing the pass code for our laptop computer for


Is there any computer online using the router.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
Click Here for more information about the routers and network

Jan 13, 2010 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

NetGear WNDR3300 RangeMax Xbox Live Failure


Hi,

Follow the below steps to configure settings on the router:
1. Open the browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.
2. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on Wireless Settings (under Setup) from the left menu.
5. Select security options as WPA-PSK. Enter a Password in the passphrase box. Apply the settings.
Scan for the wireless network on the XBOX and connect to your network.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Oct 27, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

NetGear NETGEAR WNDR3300 RangeMax Dual Band router


The Netgear wireless router wireless settings need to be configured and the the wireless card in the computer and XBox needs to be configured with the Netgear wireless settings.
Follow these steps. : -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL
3. Enter the router setup login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WAP2
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router.

Oct 11, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

WNDR3300 RangeMax Wireless N Router. I forgot my Network username and Password. How do i reset?


i did download the sofware of the ARES ULTRA and cann,t connecting to the internet

Jan 15, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

Not finding what you are looking for?
NetGear WNDR3300 - RangeMax Dual Band Wireless-N Router Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...