- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
M/Boards support all makes of hard drive Are you sure you connected it correctly The wide ribbon cable that goes in the rear of hard drive should 1) Be connected to M/board in the No 1 connector with the stripe on cable to the No 1 pin 2) the stripe on cable should go next to the 4 pin power plug on hard drive Also ensure your BIOS is set to Auto detect of driives
i have sata hdd 160 gb of seagate and hdd detected in raid channelbut when start installing window it shows message press enter for fresh installation "no hdd found please check power card,bios configuration
Check the SATA/RAID controller setting.
It could have been set to [Disabled]
Refer to your user?s manual for a detailed description on how to enable the onboard SATA/RAID controller by adjusting the jumper or BIOS settings.