Question about Car Audio & Video

1 Answer

Radio tape player security code. Removed battery and radio will not work. How to get radio working not knowing security code.

Posted by on

  • nkratzke Sep 08, 2010

    Brand name is EUROVOX

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,
You should know the security else you can't make your radio work.If you want to make it work for resetting the Radio tape player.In some player it will based on combination of buttons to reset the code.In some player we have remove the IC inside the board so it will loose the memory details.So you can work without security code.The security code is provided to prevent it from theft.Dont try wrong security code for some no of time in some Radio tape player the menu will locked.

Please specify your Dash Receivers Company name and model no so i could help you more in depth.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 08, 2010

  • Natarajan Ramasamy
    Natarajan Ramasamy Sep 08, 2010

    test code is 1111.
    If you have tried more than 3 times.Then you have to unlock in EUROVOX official service centre only.
    For EUROVOX there is no crack code.The four digit Default code is based on serial number.It will be like this is (M04584).You just have to do it legally.It strictly against law.Just get your details.Your purchase details and proof that you are the owner for EUROVOX player.Since it is anti-theft system the service center will ask this.

    post a comment for further assistance.
    Thank you for using fixya have a nice day:-)


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I have a 2006 Ford Taurus and the radio will not work recently replaced battery alternator and starter any suggestions on what it could be I'm check for radio fuse but cannot find radio fuse everything...


all fuse boxes, there is not just one;
and its marked RADIO.


radio will not work (what does that mean)
100% dead
asking for code
display dead or not
or display works but all stations dead.
what.
if 100%dead it can only be 3 things
1: fuse blow , i bet
2, wire cut to radio (called power B+)
3: the radio is dead, bench test it. ask

Jan 20, 2015 | Ford Cars & Trucks

1 Answer

Guage Cluster Dose not work


Have the CPU program reset by using a code reader . When the battery is removed the CVPU program becomes corrupted . As to the radio you will need the radio security code to re set it.

Mar 01, 2014 | 1997 Chevrolet Venture

1 Answer

My 3 year olded put 2 dvds in the player and it s jamed, wont eject. Any suggestions?


Either try and tease it out through the slot using an old CD with a piece of double sided tape stuck to the edge.

If that does not work , then the player will have to be removed from the dashboard and the cover taken off to gain access to the jammed CDs inside

IMPORTANT : Make sure you have the security code BEFORE removing it (assuming that you radio requires a Security Code)

Here is a useful website showing how to remove different radios + CD players.

www.fitaudio.com

Sep 06, 2010 | Car Audio & Video

1 Answer

How do I get the radio to work after disconnecting the battery. The owners manual was stolen


input the security code, if you losen your card, remove the audio panel and then pull out the radio and tape player partially, read the serial number shown on the name card of radio and tape player,look-up the anti-theft code corresponding to the serial number code table, or make inquire to mitsubishi service center

Jun 19, 2010 | 1996 Mitsubishi 3000GT

2 Answers

Lost code for 1996 toyota prado radio l had the battery replaced now the radio displays a sec sign


for our Toyota Prado 2001 01, after the battery had been removed SEC was showing on the cd / tape / radio display. To remove the security SEC warning, find the last 3 digits of your VIN number (under the hood) hold down the "TUNE" button and then press "1"

Then use the numbers 1 2 and 3 to type in the last 3 digits of your VIN number.

Quickly hold down "SCAN" button, the radio will power off, then press the volume button to turn it back on.

-I accidentally held down "auto" before holding down scan, I don't think auto has any part of fixing this (just an error on my part) but if the above doesn't work, you could try hold AUTO down after entering the digits then hold scan - just as I did.

SEC has now been removed, enjoy your radio!

Feb 08, 2010 | Car Audio & Video

1 Answer

I have a jvc KD LH910 an the radio wont work


no security code on this radio. try to unplug the power harness to reset the radio. that should take care of the problem

Feb 06, 2010 | JVC KD-LH910 CD Player

1 Answer

Please help me, I have a 4 Runner 2003 that has a JBL CD Player and a Cassett player in one built in the dash. Both are not working: The CD Player keeps flashing (Error 3) when ever I put a CD in...


did the error code start with the tape getting stuck? i have heard that if you disconnect the battery for 5-10 minutes it will reset the radio but make sure you have a code for it to unlock it it the radio has security. they say it starts working again if you do this. again this is just what i have heard a toyota tech say when i worked there. it may be that it knows it has a problem with the tape and keeps it inop, as far as getting the tape out, it either breaks the tape or the tape player or both. i worked at a car stereo shop for 10 years and very rare for both to survive.

Oct 28, 2009 | JBL Car Audio & Video

1 Answer

Rover 400 series tape radio player


Hi if you radio is a blaupunkt type let me know the serila number bp************ and model number 7 64* **** **** you wil need to pop the radio out to get this information


Mark

Mar 07, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...