Question about Computers & Internet
Belkin routers ship without a password, so after entering http://192.168.2.1 into your browser, click "login" in the upper right-hand corner, then just click on "submit" (leave the password box blank).
Once in the router, click on "system settings" in the left-hand margin, under "administrative password" leave the box next to "type in current password" _blank_. Then enter your new password and repaet to confirm. Don't forget to click on "apply changes" then log out.
Posted on Sep 08, 2010
Launch your web browser on the computer.
In the address bar, type http://192.168.2.1
Click login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit and you will be
able to login to the router.
In case you had set up an admin password and have forgotten the same, you will need to reset the router (By pressing the reset
hole with a paperclip for 10 seconds) and then login as stated above.
This will resolve the issue you are facing.
I will look forward to your feedback and positive rating.
Posted on Sep 08, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 14, 2017 | Belkin Computers & Internet
Mar 20, 2016 | Belkin Computers & Internet
Feb 18, 2014 | Belkin Connect N150 Wireless N Router
Jan 08, 2013 | Belkin Wireless Surf Router (F7D2301)
Sep 11, 2012 | Belkin (F5D7230-4) Router (587009)
May 19, 2012 | Belkin F5D7234-4 Router
All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.
Click "Apply Changes". Your new password is now active.
Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "Perform a hardware reset on the router". This will reset the password to its default, as well as erase any and all other settings you may have changed
Configure Wireless Security on Belkin Router - Enable WPA and WEP Why should we setup wireless Security on Belkin Wireless Router ?
After configuring your Belkin router you should secure your wireless network using proper wireless encryption. It can keep wireless hackers away from your wireless network and the unwanted sharing of your Internet connection. In order to know how to login and configure your Belkin wireless router click on the link below.
How to Setup Belkin Wireless Router
Setup Wireless Security in Belkin Wireless Router
Now I hope you just followed the steps mentioned in the above link and log in to your Belkin Wireless Router. In order to enable wireless security on your Belkin router click on Security Under wireless. ( Security tab present on the left side of Belkin configuration page).
You can select either WEP or WPA to secure your Belkin Wireless network. To know more about WPA and WEP click on the link below.
Which is better WEP or WPA on your Wireless network
Enable WEP in Belkin Wireless Router
To select WEP for your Belkin wireless network ,click on security mode drop menu and select WEP. WEP is of two kinds WEP 64 bit encryption and WEP 128 bit wireless encryption. You can type your PassPhrase and generate instant wireless key for your Belkin wireless network.
After generating the wireless key, you should save settings by click on Apply changes. Now onwards to login to your Belkin wireless network, you need this wireless key.
Enable WPA in Belkin Wireless Router
WPA is more secure than WEP. To enable WPA on your Belkin router, select WPA from security mode drop down menu.
You should enter a pre-shared key to enable WPA security on your Router. Don't forget to save this WPA settings.
Aug 28, 2011 | Computers & Internet
The settings for the router have now been reset back to their default.
If you need more help come back.Post / thumbs / testimonial are welcome!
Nov 18, 2010 | Belkin (F6D3230-4) Router (F6D32304)
Jun 20, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
46 people viewed this question
Usually answered in minutes!