Question about Lands Phones
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Press the FWD/DND button, then scroll through the menu button until the screen shows "FWD No Answer time". Then use the number key pad to change from 000 seconds to 010 seconds (or longer if required). Then exit out of the menu.
Posted on Jan 22, 2009
You will have to go through the programing button. You know the one you hit and it tells you the time the dat and how many rings etc. re program it for the max rings it will allow usually only 4 but maybe yours will do 7 Not sure, If you have the manual it will tell you. You should always keep manuals to everything you but, just throw them into a bag somewhere at leastyou'll have them when you need them I usually keep a pair of reading glasses in the bag too. Good Luck !!
Posted on Feb 15, 2009
SOURCE: change number of rings
To change # of rings you have to go into programing OK press feature * * on the main set and config (266344) then the password admin (23646) this goes to terminals and sets hit show and enter the set you want to change go to capabilities this will allow you to chang # of rings on that set
Posted on Mar 19, 2009
Yes there is, but you have to know multiplication :-)
At the extension, from the intercom dial *713 and the 2-digit time in seconds. An internal ring cycle is about 6 seconds. I think the default time comes from the system and it may be 40 seconds.
Posted on Mar 23, 2009
Is your system a BCM or a CIC/MICs system?
I know you most likely will not know, so I will give you both ways to change this... they are pretty well Identical, but there is one extra set if your system is a BCM, that is if the set programming can be done.
ok... lets get started!
Go to a programming set:
-> FEATURE * * 2 6 6 3 4 4 (CONFIG)
-> User ID: 7 3 8 6 6 2 (SETNNA) [this is the extra step I was talking about]
-> Password: 2 6 6 3 4 4 (CONFIG) [this is the default password, but could have been changed by the programmer]
Now you will have to look at your LCD for 3 arrows
<- Back .......Next->
You will not see these words in the LCD display, you just have to look for the 3 arrows that correspond.
-> You will now see TERMINALS&SETS, and press the ENTER button
-> type in the extension of the set (eg:2338), now you will see 2338: NAME
-> press ENTER and you will see LINE ACCESS press NEXT till you see CAPABILITIES
-> press ENTER and look for Call Forward No Answer
-> press CHANGE and type in the new name pressing the # button to advance to the next letter.
-> Hit the NEXT button to save
-> press the HEADING arrow to back up and press FIND to look for next extension that you want to change.
-> after all the changes are made, press the RLS button to end programming.
Posted on Aug 29, 2009
Tips for a great answer:
Aug 24, 2015 | Uniden 2.4GHz Dual Handset Cordless Phone...
Jul 15, 2014 | Panasonic KX-TG2313 Cordless Phone
Apr 21, 2014 | Avaya Definity PBX Phone 6424D+ Gray
Jan 28, 2014 | Vtech DECT 6.0 Digital Cordless Phone
Dec 26, 2013 | Vtech Cordless 6041 Phone
Feb 19, 2013 | Lands Phones
Apr 16, 2011 | Uniden Lands Phones
Apr 12, 2009 | Lands Phones
Feb 20, 2009 | Avaya 5400 Series 5410 Phone
Dec 16, 2008 | Mitel Superset 4025 Corded Phone...
97 people viewed this question
Usually answered in minutes!