Question about Sansui 19 in. LCD TV

2 Answers

ALL I CAN GET ON MY 19" SANSUI TV HDLCD1909 ARE PUBLIC SERVICE CHANNELS. IT WORKED PERFECTLY IN MY BEDROOM HOOKED UP TO DISH NETWORK. NOW I WANT IT IN MY BARN, I HAVED IT HOOKED UP TO A PHLLIPS INDOOR DIGITAL ANTENNA. PLEASE HELP!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When programing channels the cable box must be unplugged from the power source.

Posted on Feb 04, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sansui Master
  • 5,568 Answers

"Barn?" If you are not close to a metropolitan area, no indoor antenna will do much.
A well-designed rooftop antenna, preferably with amplifier will get usable signal from 75-100 miles away if there are not too many hills between.
PBS stations are scattered around everywhere so those are some that can be had when other, more powerful network stations service densely populate areas and don't care much about rural areas.

Posted on Sep 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dvd hookup


It sounds that you are connected the TV with DVD player Via AV cable. In this case, no RF channels won't go. You have to select its AV option. Check it. Refer the user manual for TV.

Aug 12, 2013 | RCA F19251GY 19" TV

1 Answer

My sansui hdlcd1909 19 in. lcd tv won't turn on. the standby red light blinks once, what can i do to turn it on?


sounds like bad capacitors on the power board. Very common problem. I would look at the caps if any appear even slightly rounded on top they are bad. They should be perfectly flat on top any puffing up means replace that cap.

Aug 07, 2012 | Sansui HDLCD1908 19 in. LCD TV

1 Answer

Toshiba hooked to dish struck by lighting, will not turn on, solution?


Ensure the power outlet has power. Try TV on a different power outlet. Switch off TV manually, switch off power, remove plug and retry after 48 hours. If problem persists, please refer it to a qualified service technician.

Aug 01, 2012 | Televison & Video

1 Answer

Sansui HDLCD1908B Television


call you digital cable provider

Jul 23, 2012 | Sansui HDLCD1908 19 in. LCD TV

1 Answer

I have one receiver in my living room. The living room tv is on the #1 channel and the kitchen, guest bedroom and master bedroom tv's are on channel #2. All remotes were working just fine and suddenly...


Hello! On the back of your receiver box you'll see a silver UHF antennae make sure its pointing straight up. If that fails try the steps in this link
http://www.dishnetwork.com/SupportSection/remote-setup
Daniel Busa
DISH Network Customer Service

Jan 04, 2011 | Universal Remote Control DISH Network...

1 Answer

I bought a small sansui tv from walmart, but cannot find out the code to program my Dish network remote to work with it. My Dish book is older and only lists one code (which doesn't work)


I most certainly hope that after all this time, you were able to program your remote! But if you have any questions, haven't gotten it working, or have another tv and remote that you would like to program, I am here to help! The link below is a link to instructions for a power scan. The scan scans all of the codes on the tv until it finds the right one for the remote. It sounds tedious, but it is a quick and simple way to get that remote programmed to the tv. This scan works for every DISH remote, and you can use it on any tv, so if you have a tv in the future that you want to program with the DISH, this will help! It's a very handy thing to know!!!!

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Becki Barned
DISH Network Customer Service

Apr 05, 2010 | Sansui TVM1916 19" TV

1 Answer

Activating HD mode


You do not activate or set the TV resolution at the TV, the signal feeding the TV has to be hi-def for the TV to show HI-DEF. TV will show what is being fed with, lo-def in = lo-def display.

Dec 09, 2009 | Sansui HDLCD1908 19 in. LCD TV

2 Answers

One T.V. snowy on Sat., clear on local channels, others are fine?


if you recently got dishnetwork call the company that installed the system for a repair person, they HAVE to fix it. if you put it in yourself it sounds like the lnb is bad or the dishnetwork splitter is bad or not hooked up right. this kind of problem is a reminder that paying an extra $5 a month for service warranty is a good deal. if something is wrong with anything then, a phone call to dishnetwork will get new equipment sent to you or a service tech sent to fix it. i don't presently work for dish or direct or a cable co but i know that's how things work.

Apr 16, 2008 | DISH Network 311 DTV Receiver

Not finding what you are looking for?
Sansui 19 in. LCD TV Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...