Question about Televison & Video

1 Answer

Mitsubishi ws-65511 when it is turned on the green light only comes on for about 2-3 seconds. i have tried to press the menu button and the enter button at the same time but no green blinking code will come up. what do i do next?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

Since no code is active that means the fault is in the power source -even the stand-by voltage is out. You must open the tv and test it to find out what went wrong - but the first one you should take a look are, as always these days, the capacitors.
If you don't know how to do that then don't mess with it, you'll only make the problem worse - call a repair guy.

Posted on Sep 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mitsubishi Model WS-65511 the green light on the front was flahing (would not stop) I replaced the 7 Capacitors as was suggested. The light flashed for a while then stopped and turned green


I think I advised you before (on this page you will find a "make a comment button" which allows follow up questions and answers without posting another question.

Green power light now comes on and goes out in few seconds:

On front of set (not the remote) press and hold when that happens both the menu and input buttons for at least 5 seconds and release both.

Power light will blink a 2 digit code like 2 blinks, 2 blinks, pause and repeat that several times---this is an error code---let me know what code you find.

Note: if you have unplugged the set it clears the error codes and you have to plug back and try to turn set on--let it fail and repeat the self check.

SD TECH

Apr 22, 2012 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Stays on for 2 seconds and switches off


A 2-2 code on that unit means over current shutdown. 95% of the time that code indicates defective convergence output IC's.

Jun 09, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

My Mitsu WS-65511 will not power on. When power is pressed on tv or on remove solid green light comes on for a moment as if television is going to come on and then it just shuts back off. I have tried...


I have had my WS-65511 fail like this, first at 4 years, second 2 weeks later, then 3rd time yesterday (4/14/2009). In past, the tech replaced a thermal sensor p/n 299P313010A (but Mitsubishi says that part is not for WS-65511 and that it does not have a thermal sensor - go figure). It is a white rectangle with about 30 pins in 2 rows and is soldered onto a board in the TV. List price is about $25.

Apr 05, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Press power button green light comes on.But no picture no sound,


I have had my WS-65511 fail like this, first at 4 years, second 2 weeks later, then 3rd time yesterday (4/14/2009). In past, the tech replaced a thermal sensor p/n 299P313010A (but Mitsubishi says that part is not for WS-65511 and that it does not have a thermal sensor - go figure). It is a white rectangle with about 30 pins in 2 rows and is soldered onto a board in the TV. List price is about $25. Might be your problem.

Apr 04, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

My Mitsubishi WS-65511 won't turn on.


I have had my WS-65511 fail like this, first at 4 years, second 2 weeks later, then 3rd time yesterday (4/14/2009). In past, the tech replaced a thermal sensor p/n 299P313010A (but Mitsubishi says that part is not for WS-65511 and that it does not have a thermal sensor - go figure). It is a white rectangle with about 30 pins in 2 rows and is soldered onto a board in the TV. List price is about $25. Might be your problem.

Feb 22, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

MITSUBISHI 65" RAER PROJECTION TV MODEL-WS 65511


Try to press both the menu button and the input/device button on the set both in together and hold in for 6 seconds to see if the led will blink a two digit blink code, then let me know the two didgit code, and I will try to assist you. Please respond to this same post when replying.

Aug 08, 2008 | Mitsubishi WS-65869 65" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...