Question about Invacare Pronto M51 Power Wheelchair

1 Answer

Chair lifts up but won't go back down - Invacare Pronto M51 Power Wheelchair

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Jean I'm sorry but sounds like you have a motor or switch problem. I am not that familiar with this problem but you can contact Invacare Tech support @ 1-800-333-6900 or if Medicare purchased the chair for you contact Repair Xpress @ 1-877-581-3733 or Roadrunner Mobility @ 1-800-467-2668 and Medicare will cover most of the repair costs Hope this helps

Posted on Sep 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The speed lights keep flashing. It still moves.


The speed light flashing usually indicate that the chair is in "Limp Mode" This could be either the motor is getting too hot or the chair has a lift on the seat. If the chair runs fine for a while and then this condition appears, you may have a bad motor or a brake dragging causing the motor to get hot. the controller will allow less power to the motors to help it cool down and still keep you mobile. If you have a lift on the chair that raises up the chair, you will have to lower the chair down to gain the full power back. If neither one of these solutions are the problem, then you will need a Tech to come out and look at the problem. you may have a more serious problem that a tech can troubleshoot.

May 11, 2015 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

How do I lower the back?


To lower the back, lift it until it stops firmly. Now let it fall all the way down. (It might need a little push to go all the way down.) To raise the back, lift it slowly until it clicks once. Each click is a height setting; it will stay at that height. Repeat until the back is high enough. To go back down, start over.
(This definitely applies to Tempur-Pedic TP4100 Office chair.)

Nov 01, 2014 | Tempur-Pedic TP4000 Ergonomic Fabric...

1 Answer

How do I lower the back of my chair


To lower the back, lift it until it stops firmly. Now let it fall all the way down. (It might need a little push to go all the way down.) To raise the back, lift it slowly until it clicks once. Each click is a height setting; it will stay at that height. Repeat until the back is high enough. To go back down, start over.
(This definitely applies to Tempur-Pedic TP4100 Office chair.)

Sep 09, 2014 | Tempur-Pedic TP4000 Ergonomic Fabric...

1 Answer

Lift chair will not go up or down


Here's the manufacturer's phone #

1-800-994-3390 Reviews state that the hand controllers fail a lot and the parts department is slow.

Jul 26, 2014 | Home Meridian Comfort Lift Recliner

1 Answer

How to adjust the back of the chair?


To lower the back, <b>lift</b> it until it stops firmly. Now let it fall all the way down. (It might need a little push to go all the way down.) To raise the back, lift it slowly until it clicks once. Each click is a height setting; it will stay at that height. Repeat until the back is high enough. To go back down, start over.
(This definitely applies to Tempur-Pedic TP4100 Office chair.)

Jul 01, 2014 | Tempur-Pedic TP4000 Ergonomic Fabric...

1 Answer

Chair will not go down


Most Common problem for Home Meridian Lift Chairs...........

Nov 23, 2013 | Home Meridian Comfort Lift Recliner

1 Answer

Pronto m41 moves slow at all times


If you have a seat lift on your chair, you will have to lower the seat lift. This is call limp mode so the chair does not move to fast and tip over while the person is in the chair. If this is not the case, then your chair controller may be over heating and it will also cause the chair to go into limp mode. this is a better option than totally stopping. the way to correct this is to let the chair sit and "cool down" for a little while. It usually takes about 30 minutes, sometimes less in cooler environments to get the chair back to normal use. If neither are the solution, then you have a problem with the chair that causes the controller to reduce the output. You will need to get an authorized Tech to check the chair out to determine the root cause.

Oct 30, 2013 | Invacare Pronto M41 Power Wheelchair

1 Answer

Liftcair won! tgo back to recline


Hi
I have found this site for you, You should be able to search for your chair. Once you have found your chair it should also bring up the manual option. Maybe the manual will be of help.
http://www.pridemobility.com/liftchairs/findyourliftchair.asp

Sep 15, 2012 | Pride Gl 358L Electric Lift Chair Riser...

Not finding what you are looking for?
Invacare Pronto M51 Power Wheelchair Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invacare Health & Beauty Experts

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

MobilityRepairSpecia...
MobilityRepairSpecia...

Level 1 Expert

61 Answers

Are you an Invacare Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...