Question about Home Satellite Radios

1 Answer

CAPTIVEWORKS700S its a new receiver and i downloaded the bin file for the first time but it only put 1-6 channells on the receiver so i put a different fix on it and it still only has 6 channells

Posted by on

1 Answer

Enter f1 000 to enable patch...enjoy

Posted on Jul 11, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ID 4Z9AB0MC activated 2 days ago. Cannot select channels. Thumbwheel only displays 3 channels, ch.0,1,247. When pre/dir is pressed and a channel is selected, the selected channel number flashes...


Use plug-in power supply and leave on channel 1. Call XM (1-800-XM-RADIO) and ask them to "refresh" your radio. WAIT 1/2 hour, then check your channels. Make sure you have a decent signal too (can hear Channel 1 okay) before you call XM for the 'refresh signal' for your new radio.

Dec 21, 2009 | Delphi MyFi SA10113 XM Radio Receiver with...

2 Answers

Sirius Radio Invalid Channel message


1) Do you have a Sirius account?

2) Have you called Sirius and given the serial number of that receiver?

Those are the first two things you have to do to get a Sirius receiver working. (The original owner could have changed his account to use his new receiver, if he has one.) Go to http://www.sirius.com/install - the "activate" part - for details.

Aug 20, 2008 | Clarion (NAVSIR) SIRIUS Radio Receiver

1 Answer

Cobra-sr900 reception


Press E after the Channel # instead of manuel.

May 27, 2008 | Home Satellite Radios

2 Answers

New fix for coolsat 6100


There isn't any new fixes yet. The last one is 1.36 but is not currently working as you know.
BTW, I do not think you will find that bin in here.
Sorry.

Feb 10, 2008 | Home Satellite Radios

5 Answers

Viewsat ultra reciever has no power/lights etc.


OK I did my research. Apparently there is a little chip inside the receiver that has burnt. We need to take our receiver the the people who know how to fix them and replace the chip with a new one. It might take time as from what I hear it could be any chip? Hope this helps

Dec 08, 2007 | Home Satellite Radios

2 Answers

Captain 7000


load Captain loader version 1.24 or 1.25 then when you download new file extract it to open then open loader and at the left on top click file open the extracted file turn on the captain unit and away you go it will start to download.

Nov 30, 2007 | Home Satellite Radios

4 Answers

Viewsat ultra 2000 fta sat. receiver


I have sat ultra 2000 have some file store in my disk when I download to receiver by mistake I klick the file fix. I put the power off and remove my cable put the power on I have some problem that Receiver constantly on and off and I try to download the file I can't because the power does not stay and there is no line or 0 digit please help me
Thx
Robin

Nov 26, 2007 | Sirius Satellite Radio Sirius SIR-ALP1...

8 Answers

Clarion SIRIUS Radio Receiver - Not Receiving All Subscribed Channels


My DX445 does the same thing. Here's my method for fixing it, it should work for any similar Clarion receiver:

1. If possible, make sure the radio is turned off when disconnecting the battery. If the radio turns itself on when the vehicle is restarted (for example after jump starting or battery disconnect for a few seconds only), turn the radio off.

2. Disconnect the battery by removing the negative battery cable from the battery. Leave it disconnected.

NOTE: Car batteries can be dangerous things. If you're unsure how to do this safely, get an experiences mechanic to help you.

3. Reset the radio. On my radio this is done by removing the faceplated, and pressing a tiny button for 30 seconds. Your radio may be different.

4. After waiting at least 20 minutes, reconnect the battery.

5. My radio displayes 'System Check -- Press Power'. After pressing the power button, the display reverts to the clock.

6. Turn on the radio. It should work fine on the broadcast bands.

7. Select 'Sirius'. The radio should display 'Updating'. Don't touch anything until the radio finishes its update phase. When it's done, it should tune to Sirius channel 1 and play as normal.

8. This should restore normal tuning. reset your presets and preferences.

What seems to happen is that the radio gets stuck in a 'Category Select' condition, but not all the categories will load, and manual tuning will not allow, say, Radio Classics to play when the radio is stuck in Pop mode.

On occasion (maybe 1 time out of 10), the radio hangs while doing the 'updating' in Sirius mode. If this happens, just shut off the radio and start over. I've never had to do the brute force reset more than twice since I stumbled on this method.

Aug 11, 2007 | Clarion (NAVSIR) SIRIUS Radio Receiver

Not finding what you are looking for?
Home Satellite Radios Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Satellite Radios Experts

John
John

Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...