Question about HP Compaq Presario V2000 Notebook

1 Answer

NO display.1 beep followed by 4 beeps.

Hello again. i bought new ram for the laptop.put it in and still the same problem. any idea what else it could be? please let me know..


thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello Leo,

If you are sure ram is verygood, then verify the video card. this is the last fault of the PC the video card.. try to remove and clean it and then refix it again..i guess video card is lessen. if this not work try new video card but if is built in to the board you need to contact the vendor or the nearest HP service center.

Only this a problem to your pc, if you can fixed this your pc will run succesfully.

may this help,

melnavz

PS:pls do not rate me if my solution not solve the issue and you need more further information. but if is invaluable solution rate me fixya.

Posted on May 14, 2008

  • Emelio Navaja
    Emelio Navaja May 14, 2008

    About the new ram you can insert it to the spare slot to increase the performance of the pc.



    melnavz

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Vaio LT35E 1 long beep and 2 short beep on power on. no display. need help


Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information
It seems that there is RAM issue because of which you are 1 long beep and 2 short beeps refers on your Sony Viao laptop in such case the basic thing is to replace your RAM and youn't be able to get the beep sound again or else you can also Rub the golden foil of your RAM with rubber and try to insert it again. Hope it works for you.

May 24, 2011 | Sony VAIO LT35E T8100 2.1G 3GB 640GB BDRRW...

6 Answers

Dead


Hi

THe most common beeps that you will encounter 95% of the time in repairing PC's are:

1 beep - computer ok
continous beeps / long beeps - memory error
continous short beeps - bios boot block/corrupted bios
1 long beep followed by 3 short beeps - video card error


or this might help

you can check out this list



AMI BIOS

1 short - Computer ok
2 short - RAM failure
3 short - Parity RAM failure
4 short - System timer failure
5 short - Motherboard failure
6 short - Keyboard controller error
7 short - CPU failure
8 short - Video RAM failure
9 short - ROM BIOS error
10 short - CMOS read/write error
11 short - Cache RAM error
1 short, 3 long - Memory failure
1 short, 8 long - Video adapter failure

Check board/chipset makers website for more infomation.

AWARD BIOS

1 long - Memory error
1 long, 2 short - Video error
1 long, 3 short - Video failure
Continuous beeps - Memory or video failure

note that AWARD relies on motherboard manufacturers to develop their own beep codes - the above are only their own internal codes. You will need to refer to your own manual for an explanation of precise codes.


Standard IBM beep codes.

No beep - Power supply or motherboard failure
1 short - System is ok
2 short - POST error (code displayed on screen)
Repeating short - Motherboard failure
1 long, 1 short - Motherboard failure
1 long, 2 short - Video display adapter failure
1 long, 3 short - Video display adapter error
3 long - Keyboard error


Pheonix beep codes

1-1-3 CMOS memory failure
1-1-4 BIOS failure
1-2-1 System timer error
1-2-2 Motherboard error
1-2-3 Motherboard error
1-3-1 Motherboard error
1-4-1 Motherboard error
1-4-2 Memory error
2-x-x Memory failure (any number of other beeps)
3-1-x Chipset error (any number of other beeps)
3-2-4 Keyboard controller error
3-3-4 Video adapter failure
4-2-4 Expansion card failure
4-3-4 Time of day clock failure
4-4-1 Serial port error
4-4-2 Parallel port error
4-4-3 Math co-processor error


pls rate as fixya if it helps. thanks

Jul 04, 2008 | Acer Aspire 5100 Notebook

3 Answers

Hp dv6000 laptop beeps 4 times n won't display on start up


I had the same problem, i found it was because my RAM stick was installed loose. I removed and fixed it again properly.
Issue was sorted.

May 14, 2009 | HP Pavilion dv6000z Notebook

2 Answers

Blank screen long beep 2 short beeps at startup.


The 1 long 2 short beep code means a problem in the video circuitry and the laptop can't initialize the display. This is usually caused by failure of the integrated video chipset. Unfortunately, on a laptop you can't just open the case and install a new video card like you can on a desktop. You need to replace the mainboard. Replacements are available online. Here is one source found by a Google search. (I'm just using this as an example. I haven't dealt with this site.)

The 4 beep code means no memory detected when the computer started up. No surprise there since you had taken it out.

Apr 23, 2009 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

4 beeps 2373 laptop


Standard Original IBM POST Error Codes
Code Description
1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System
AMI BIOS Beep Codes
Code Description
1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems
Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.
Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure

Feb 19, 2009 | IBM ThinkPad T40 2373 Notebook

1 Answer

I put a 1gb expansion ram in my toshiba satellite M35X-S149.  Did it with the battery out.  Put the new ram in the empth slot - - 256 mb in the other slot from the factory.  When I turned on the power, the...


Remove the 1 gig chip. Pull you battery out and unplug the laptop. Hold the power button in for 10 seconds. Put the battery back in and plug the laptop back in again and try booting it up. This should reset the BIOS and allow it to boot. The beep codes you are talking about are a memory beep code and it is normally caused by adding memory or a loose memory stick. Also try pulling the existing memory and resetting it.

Dec 20, 2008 | Toshiba Satellite M35X-S149 Notebook

1 Answer

Display problem


The most common beeps that you will encounter 95% of the time in repairing PC's are:

1 beep - computer ok
continous beeps / long beeps - memory error
continous short beeps - bios boot block/corrupted bios
1 long beep followed by 3 short beeps - video card error


or this might help

you can check out this list



AMI BIOS

1 short - Computer ok
2 short - RAM failure
3 short - Parity RAM failure
4 short - System timer failure
5 short - Motherboard failure
6 short - Keyboard controller error
7 short - CPU failure
8 short - Video RAM failure
9 short - ROM BIOS error
10 short - CMOS read/write error
11 short - Cache RAM error
1 short, 3 long - Memory failure
1 short, 8 long - Video adapter failure

Check board/chipset makers website for more infomation.

AWARD BIOS

1 long - Memory error
1 long, 2 short - Video error
1 long, 3 short - Video failure
Continuous beeps - Memory or video failure

note that AWARD relies on motherboard manufacturers to develop their own beep codes - the above are only their own internal codes. You will need to refer to your own manual for an explanation of precise codes.


Standard IBM beep codes.

No beep - Power supply or motherboard failure
1 short - System is ok
2 short - POST error (code displayed on screen)
Repeating short - Motherboard failure
1 long, 1 short - Motherboard failure
1 long, 2 short - Video display adapter failure
1 long, 3 short - Video display adapter error
3 long - Keyboard error


Pheonix beep codes

1-1-3 CMOS memory failure
1-1-4 BIOS failure
1-2-1 System timer error
1-2-2 Motherboard error
1-2-3 Motherboard error
1-3-1 Motherboard error
1-4-1 Motherboard error
1-4-2 Memory error
2-x-x Memory failure (any number of other beeps)
3-1-x Chipset error (any number of other beeps)
3-2-4 Keyboard controller error
3-3-4 Video adapter failure
4-2-4 Expansion card failure
4-3-4 Time of day clock failure
4-4-1 Serial port error
4-4-2 Parallel port error
4-4-3 Math co-processor error
the vga board has failed, its a very common problem in acer laptops, you can get a replacement part from www.acerparts.com im not sure if they ship into us but for europe thats where I get my parts.
my acers vga failed two times, ones within warranty and 12months after that, I have to say that acer products are really bad quality, I'm not sure about the latest models but from what I've seen the vga chipsets have real issues with the motherboards and keep failing over and over again.


I have not looked inside your model but the vga is either integrated into the motherboard = that means the repair will cost the whole motherboard, better to buy a new one.

if your model has a removeable vga like mine does, then you can consider changeing it to a new one. contact acer parts.

One of the covers in the bottom is the memory, one is network and last one I don't remember.
here are the contact details if your acer is out of warranty
http://www.acerparts.com/contact_us.php

The parts for your model are at http://www.acerparts.com/index.php?cPath=561_562_1064

you will have to contact acer parts directly, it may be that the vga is build into the motherboard or then the vga parts are not listed.


Hope this may help;


Regards,
VOTIT


DON'T FORGET TO RATE;


Jul 29, 2008 | Acer Aspire 5570-2758 Notebook

1 Answer

I have a HP Pavillion DV 2000 laptop with me. When i boot my system it gives 1 long beep followed by two short beeps and the system doesnt boot. I am not sure as what to do. Can someone help me here?


This website:
http://www.pchell.com/hardware/beepcodes.shtml

Lists standard beep codes for computers. The one long, followed by two short beeps indicates a display problem according to the site.

I have heard other people say that the same beep codes specify a RAM problem.

Have you recently installed any new RAM or a new graphics card, or made changes to either.

It seems likely to be the graphics card because of the missing info on the screen. Usually when RAM is bad there is something on the screen.

Jul 17, 2008 | HP Pavilion dv2000t 14.1" Notebook Laptop...

1 Answer

NO display.1 beep followed by 4 beeps.


Hello,

try remove and clean the memory and the insert it again.. if this not solve you need to replace it.

may this help,

melnavz

PS:
pls do not rate me if my solution not solve the issue and you need more further information. but if is invaluable solution rate me fixya.

May 13, 2008 | HP Compaq Presario V2000 Notebook

2 Answers

No screen, 2 rounds of 1long beep+3 short beeps; doing for a while


It may be the cause of the video problem due to the single beep and following 3 beep.clean the memory slot and insert th memory again,that is also a remedy for the problem.check a new memory by inserting in the slot also.I think it may solve the problem

Feb 06, 2008 | Toshiba Satellite M35X-S163 Notebook

Not finding what you are looking for?
HP Compaq Presario V2000 Notebook Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...