Question about Fisher and Paykel GWL11 Top Load Washer
of the Wash Progress LEDs flash when the machine stops due to a fault.
The 8 Wash Progress LEDs stands for the binary digits and by indicating
the digits, the fault code number is determined. The fault code can be
shown by activating Diagnostic Mode if none of the Wash Progress LEDs
Turn machine OFF on the control panel then hold down the Water Temp Down button and press the POWER button until the machine gives 2 short beeps and lights up. Release buttons and you are in Diagnostic mode. Press the Spin Speed Up button 3 times until the Hold and Slow LEDs are lit. Write down the LEDs which are lit across the Wash Progress LEDs and post it back.
You don't have to accept or reject and rate this post to add information or post comments and follow-up questions should you need further assistance. But accepting the solution does not stop you from communicating with the expert. You may continue communicating with the expert as long as you need assistance regarding your concern stated herein.
Posted on Sep 07, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 09, 2016 | GE Dryers
Dec 18, 2015 | Samsung Washing Machines
Dec 02, 2012 | Evermoremedia DoubleDown Casino
Mar 26, 2011 | Washing Machines
Apr 28, 2009 | Maytag Atlantis MAV7000
Jul 14, 2008 | Hotpoint First Edition FEW12 Front Load...
Feb 29, 2016 | Fisher and Paykel GWL11 Top Load Washer
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: