Question about Symbol MC9090 Mobile Computer Portable Terminal

1 Answer

Hi there, we've got a Symbol MC9060 with defective Backup-Batteries. I've cold bootet the device and it has been loading on the craddle for days. Even after this I don't see the backup-batterie in the menu. Could anybody tell me, where the backup-batterie is and how to change it? I removed a few screws, but I didn't see anything. Thanks and Regards Stephan

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On top of it there is black cover.
the shape of the MC9060 backup battery is as below
http://www.repairhppda.com/backup-battery-for-motorola-symbol-mc9000-mc9090-series-p-3629.html

Posted on Nov 05, 2010

  • dlucre Jan 06, 2011

    This task isn't too difficult if you have some basic tinkering skills. There are 2 screws in the battery compartment, and two at the back of the device at the top. Undo all 4, and gently but firmly slide the back (handle and all) towards the top of the device. Be very careful, however, as there are 3 small wires connecting to the back of the device to the handle assembly. So, you'll need to unplug these once the back pops open, to seperate the two.

  • dlucre Jan 06, 2011

    The backup battery is in the handle. You'll need to undo the screw holding it in, and simply pull the battery and rubber protective shielding out. Find a replacement, and reverse the steps above.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need MC9060 Clean Boot Files, please help!


Hi Gregor Rogowski,
Here is the link to the files for all of the MC9xxx series
http://www.wavelink.com/Zebra-MC9000-All-Downloads/

Aug 14, 2015 | Symbol MC9060

1 Answer

Mc9060 no sound: in setting i set it to the high volume setting - enter - then check it is back to the lowest setting- not holding change in settings


you need to connect the handheld to your PC and then use software to change settings for the device. There is no other way for the settings to persist a cold boot.

Mar 17, 2011 | Symbol MC9060 Barcode Scanner

1 Answer

IPL Flashing screen will not come up. Flashing now impossible?


Unit is stuck in IPL mode, you need to completely reload this unit, I can help You can always contact me by phone or email 630-622-2024 akowalski@legacyglobal.com Please visit our website www.legacyglobal.com

Oct 14, 2009 | Symbol MC9060-G

1 Answer

How to install the backup battery for a Symbol MC9060


Well, you have to disasamble the unit first, it could be little tricky. Please contact me so I can get you more detail depending on your skill level. You can always contact me by phone or email 630-622-2024 akowalski@legacyglobal.com Please visit our website www.legacyglobal.com

Sep 23, 2009 | Symbol MC9060-G RFID RFID Reader - P/N...

1 Answer

MC9060 driver missing question


when you get the OS from symbol you also need to get the application and platform files at least. the platform file is the one that contains the driver for the radio. you will need to download it using tcm or perhaps you may be able to find an os update which contains all the files and you can do from a sd card. Let me know if you can'ti will need to know what find it as i do have various os for this devices.

May 15, 2009 | Symbol MC9060-G

1 Answer

MC9060 Symbol how to configure


Please give me a call I can deffinatley help...678-468-9242 - Lyndon

Dec 15, 2008 | Symbol MC9060-G Portable Terminal

2 Answers

MC9060 RESET


press the power button for at least 30 this will cold boot your device and set to default.. if for some reason the TARGET application or settings still there what you need is use active sync to remove the REGSAVE from application or some kind of Template that Target has installed onto device....

thanks

Oct 17, 2008 | Symbol MC9060

2 Answers

Symbol mc9060


You can reflash the unit - let me know if you need help with this:

Ian

DC Solutions
ianv@dcsolutionsonline.com

Sep 23, 2008 | Symbol MC9060

Not finding what you are looking for?
Symbol MC9090 Mobile Computer Portable Terminal Logo

Related Topics:

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Michael

Level 2 Expert

51 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...