Question about Kenmore HE2 Plus Front Load Washer

1 Answer

FLASHING F 01 - Kenmore HE2 Plus Front Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The F1 error code on this washer indicates a Primary Control Board failure.



It is likely that the machine control board will need to be replaced to correct this problem.



The part number for the machine control board is undetermineable because you have not provided me with the exact model # of your washer.



The procedure for replacing the machine control board is provided HERE

LINK: http://media.fotki.com/1_p,wfgstgtftbtkrrdxgtqsskgwtqkq,vi/gfsfgfsgqxgfqtqtgwf/1/1303472/5961857/image55806img-or.gif



NOTE: Be sure to unplug the washer to disconnect electrical power before accessing internal components.



There is a slight possibility that a problem with the pressure switch hose could be causing this problem.

A pinched or twisted air hose can cause this fault code.

When you open the console, check the air hose connected to the pressure switch on the machine control board.

If it is pinched or crimped, I recommend rerouting the hose to resolve this problem.

This may fix your problem without replacing the control board.



NOTE: You may want to check for this condition before ordering the control board. Most electronic control boards cannot be returned for a refund or credit.



If you find no apparent problems with the air hose on the pressure switch, then replacing the machine control board on this washer should correct your problem. There is a risk involved in replacing this part yourself.

As noted above, you could have a problem with the air pressure hose that is not apparent upon your initial inspection. A service technician would normally need to properly and thoroughly diagnose this problem before replacing the control board.





Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Yamaha MT-01 is emitting warning light code 38


Hi, Najaf for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha MT Owners Club
Yamaha Fault Codes
Yamaha MT 01 Service Manual
OEM parts for Yamaha
YAMAHA MT 01 Owner Manual

Oct 13, 2012 | 2008 Yamaha MT-01

1 Answer

I am wanting to start using optical but the channel (01) keeps flashing and theres no sound? Any Ideas?


CD 01 coaxial digital or optical inputs. If the 'o1' is flashing this means there is no signal. This could either be a damaged optical spdif/ coax cable or the sample rate your sending to the sherwood is too high (over 96k ?) lastly it would be a fault with the system itself.

Dec 16, 2010 | Sherwood RD-6106 Receiver

5 Answers

New starview codes


CW Keys 5C01 updated 06/10/09 10:20

00= BC B6 BB DD 97 AD 11 63
01= 42 B7 84 3E BE 8C 4E 65



TW Keys 5A01 updated 06/10/09 10:20

00= C2 B5 BE 41 0D 9B C5 7C
01= 6D EA 8E 97 6A AA DA 71

NTL Keys 5401 updated 06/10/09 10:20

00= A0 51 3B 27 17 7D D0 28
01= F0 CF C3 01 F1 2D AB B8

Oct 05, 2009 | Intel CPU

1 Answer

Format error and flashing C:13:01


Format error is a problem with the memory card.

Try using a card reader and a computer to recover the files inside the card, saving them on the computer.
When you have finished try formatting the memory stick or replace it with a new one.
If you still get the error with a newly formatted memory stick, then that is a faulty mainboard inside the camera, but this is not common.
Usually you fix C:13:01 just formatting or replacing the memory card.

Feb 24, 2009 | Sony Cyber-Shot DSC-P73 Digital Camera

1 Answer

Flashing f-01


what does f-01 (flashing) mean
on a hotpoint wt 965

Oct 30, 2008 | Washing Machines

2 Answers

Flashing F


check out this link for the error codes u receive and how to resole it manually

http://www.applianceaid.com/duet_washer.html#duet

good luck thanks.

Oct 26, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Sony T5 is flashing Error E91:01 and the pictures are blurry


My Sony cam was woring fine but suddenly it started giving an error E91:01 which is continuously flashing

Aug 27, 2008 | Sony Cyber-Shot DSC-T5 Digital Camera

2 Answers

E:91:01 flashing


i also have E:91:01 flashing on my camera and when i take a picture it does not flash even when my camera is on flash

Aug 24, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

E:91:01 Error


E:91:01 is error code related to Flash Circuit abnormality. It requires qaulified technician to fix and such person would be available at nearest Sony repair shop.

Jun 03, 2008 | Sony Cyber-shot DSC-W30 Digital Camera

1 Answer

Actiontec (GS503AD3-01) Modem


--If the Power light is flashing red thanits definately problem with the Actiontec Router --As you have checked with different power source, the possibility of bad power source is no more --May be due to some voltage fluctuation the modem is gone bad.

Jul 10, 2007 | Actiontec (GS503AD3-01) Modem

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2183 Answers

fordexpert

Level 3 Expert

5522 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...