Question about Televison & Video

6 Answers

Thomson top up tv remote codes

Hi
I have a Sony Tv model KV-28LS35U. What are the codes I require to input into Thomson Top Up TV remote to make it work TV - and how do I do it !!

Posted by on

  • lisamaried Aug 05, 2008

    i have a samsung LE32A457CLDXXU and i need the code so i can use my top up tv with it.

  • numpty-1 Aug 16, 2008

    i have a thompson tv recorder and a nicam digital goodmans tv and need the code to use the remote with the tv, please help?

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need sequence to tune in remote controller

Posted on Dec 16, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i know what the sequence is for the remote, on my controller it is

TV - OK+TV (two flashes) - "CODE" - TV - MEANS THEN

Posted on Aug 26, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need a code for my Orion TV my remode control is a Thomson ROC 3404

Posted on Nov 24, 2011

Mmmmmmmmmmmmmmk

Posted on Oct 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a samsung tv model le32a457cldxxu. what are the codes i require to input into thomson top up tv remote to make it work tv.

Posted on Aug 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to tesco tech support site,find codes then press tv,ok and av together,light will flash,enter code,if done right light will flash again,tv should now respond to remote,if not try again with next code.

Posted on Feb 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Grandchildren put in video now cant get signal back on tv


On you remote control look for INPUT or SOURCE, cycle though until you get it back. Very often it will be listed as the name of the cable or satellite source.

Jul 04, 2016 | DISH Network Televison & Video

1 Answer

Do a recording on my thomson dv3 digital terestrial recorder


The Thomson DV3 is now called Top Up TV. The manuals for the product are here: http://www.topuptv.co.uk/help+centre/downloads

This site also gives the codes to make the Top Up TV box control your TV volume. Hope this helps.

Sep 16, 2014 | Televison & Video

1 Answer

How to change input on tv without a remote


Which TV do you have? Some will have an Input or Source button on the front panel. A few will have an option to change the source from the menu. Both of these options require the front panel lock to be inactive.

A few older TVs allowed you to find the A/V input by pressing Channel Down on the front panel buttons until you passed channel 2 (or Channel Up until you nearly reached Channel 2). This option wouldn't work if the A/V inputs had been deleted when someone minimized going through unused channels.

If the Source or Input button was only available on the remote, you will need a universal remote that includes this feature. These cost a bit more than the lowest end remotes. Then you will have to try all of the codes to find the one that makes the Source button work with your TV. (Several codes may work for On/Off but not the change input.) The Universal remotes that can be programmed from a computer (USB connection) will be the easiest to set up. Remotes.com may have a replacement original or substitute remote for your TV that should work for all of the TV functions.

I hope this helps. Please add a comment with the TV make and model for specific options for your particular TV.

Cindy Wells
(low end TVs usually only had the Source/Input button on the remote.)

May 12, 2012 | Sony Televison & Video

1 Answer

I Have a tv sony kv m1400, but i don't have the user manual,so i don't know how to tune the tv.


1. Press and hold down the [White Arrow Up] 'shift' button.
2. While held down press the UHF tuning button (symbol for button is ->).
3. Press + or - to tune up or down the UHF band as required, until the required station is reached.
4. Select a spare Channel Position.
5. Press [Arrow Up] & [UHF Tuning ->] buttons again to store and exit tuning.
You must use the remote control. No tuning is available on TV.

Feb 09, 2011 | Sony Televison & Video

2 Answers

What is the sky remote control for Samsung


Hi

Samsung
4 digits: 0060
3 digits: 065, 584, 037, 245, 476, 398, 516, 292, 318,037

Samsung (6000 series)
4 digits: 1340

As you used 0060 and it didnt respond please try to programma with the other 3 didgit codes.

If still you cannot programme it follow the below instruction:

1. To control your TV firstly switch on the TV set, point the Sky remote at the TV,
2. Press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice.
3. Continue with this process by continuously pressing "TV" then "Standby" then "TV" then "Standby" etc until the TV set switches off. This will start using the inbuilt codes to programme the remote.

Thanx

Jul 27, 2010 | Samsung Televison & Video

1 Answer

I neet to program a dish network universal remote to my ccd tv. how do i do it?


To program the remote to your TV we would need the model # on the back of the remote at the top. To do it yourself you can check out the link provided below to get the codes for TV manufacturers, DVD's, amplifiers, etc.

To program the remote to the TV
1. Turn TV on.
2. Hold TV button on top of remote until all the mode lights turn on.
3. Let go and the TV button will blink. Enter the code found at link below and hit #.
4. Try the use the remote, if it works then push SAT and you're good to go. If not repeat steps 2 and 3 to try a different code.

Link for Codes
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

Tommy Faust
DISH Network

Oct 12, 2009 | DISH Network 301 DTV Receiver

1 Answer

Switch Toshiba projection tv to receive input from video-1?


jbrowne_usa

If your DISH remote is programmed to your Toshiba TV, you can press the TV button at the top left of the remote and then release. This will put the remote in TV mode. Press and release the TV/Video button just below the clear TV button. This will cycle through the inputs on your TV. Continue to press and release until you have Video-1 displayed on your TV screen. I hope this helps.

Ray Calo
DISH Network

Jun 14, 2009 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Thomson 80gb freeview recorder box (Top up tv model) UK


have you connected the small cable at the back?

Jun 04, 2008 | Televison & Video

2 Answers

Remote control tv set up code


Check with this,062,004,075,008,019,003,012,068,069,076,086,087,088.

Mar 23, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6384 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...