Question about Audio & Video Receivers

3 Answers

Roland VS 2480

Hard drive was pulled while still in use.  The unit will not recognize the hard drive now.  Thanks for your help.  Our EP depends on it.  -Jason

Posted by on

  • anytimemovin Aug 30, 2008

    my hard drive isnt being recognized - during dvd back up burning it said write error then started flickering.

  • Anonymous Apr 23, 2009

    on my roland vs 2480

    my automatic sliders are not working what do i do

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Press the "UTILITY" button under the Menu heading above the 10 digit key-pad. Under "System Parameter" -Param3, check that PS2 Mouse is set to "ON" and (of course) that the connector is firmly inserted into the mouse connector socket.

Posted on Aug 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to go on utility system parameter on the f2 parameter page vga out check on ,and operation target check vga.

But also you should make sure that you have the proper os for your vs 2.504 ,you can download it from roland site ,and you'll get information about how to upgrade the unit.

Posted on Jul 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Where can i buy a mother board for roland vs240

Posted on Jun 08, 2008

  • changon Jun 08, 2008

    on roland vs 2480  the external monitor does not recognize the cursor i can not  find it on the screen though it does appears on the on board screen how do i fix or where can i send it to get fixed

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY RECEIVER FROM SHUTING OFF ON ITS ON


HI Bart, which model is it that you are using? Have you tried a hard reset? Please email me the units model number so that I can email you the reset procedure for your model. You can email me at askOnkyo@us.onkyo.com, Thanks, JT

Sep 29, 2015 | Onkyo Audio & Video Receivers

3 Answers

The hard drive was pulled out of the unit while it was running. when the hard drive was reconnected the unit would not recognize it. its and older 2480 without the cd drive. your help would insure that...


I would first try installing this into a desktop computer as a slave drive. Once hooked up you should be able to see if there is anything salvageable, files etc. yourself before you send it in for to an expensive data recovery service.
Take Care
-WN

May 13, 2008 | Audio & Video Receivers

1 Answer

I have a Roland keyboard with a DC jack. I can wiggle the jack and the power cuts on and off. How do I fix this?


  • Hi, I can help. You just have a cold soldier joint on the DC power input.Get the top/bottom off by removing a few screws and expose the connector. Just take a little soldier and touch up the solder points on the connector on the board. That's it. Will be good as new.
  • I recommend doing this before that jack gets pulled a bit to hard and tears off the circuit board which then may require more than a couple soldier joint touch ups.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 26, 2011 | Audio & Video Receivers

1 Answer

I have a brookstone brand record player with the ability to convert records to mp3/wma files via a sd slot and a usb slot. Every time I plug in an empty flash drive/ usb toward an external hard drive, or...


Hi,
External drives require to be formatted before use on somewhere else..
Pls "format" it on your Pc and than try again....
Sometimes proper formatting is possible on the equipment itself (like Digital Cameras )
I was not able to get into your units detailed specs to see if such feature is existed..
if its exist ,you must access thru "set up menu"
Secondly ,if the display recognizes the HD than your Record player will create its own Files/ folders..try to record something even it reads "no file" and than plug it into your PC to see what has been recorded..
Hope this helps!
Take care and please
Remember to rate/vote and give me 4 Thumbs Up for me to continue f
or Helping out the Community :)

Jun 24, 2011 | Audio & Video Receivers

1 Answer

I have a roland r8 drum machine and had it for some years, and over that period of time grime and dust particles have got into the buttons, and I find it hard to get the buttons making contact, how Do I...


You cannot clean the buttons as they are micro switches mounted from inside. They are the same buttons as on your DVD player or old VCR. It will require professional help as it involves stripping the whole front panel , de-soldering the switches and then soldering new replacements. The switches are not at all costly but the job is labor oriented.

Mar 08, 2011 | Audio & Video Receivers

1 Answer

Roland VS-2480 DVD Workstation


have problem with vs 2480 anyone fixes  roland vs  2480

Apr 10, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

695 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...