Question about Televison & Video

1 Answer

I recently got a Panasonic CT-27G24A TV. It's in great condition, picture is great, sound is great. After watching it for a while I noticed that the picture was skewed. What I mean is the "letterbox" tilts slightly from right to left, just enough to be irritating. Is there some menu not covered in the owner's manual that can help me resolve this? Or anything else I can do? Thank you

Posted by on

  • pennproff Sep 07, 2010

    Thanks so much!! Appreciate the fast, knowledgeable reply.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

The fix is done entering in service mode and changing the values of HPOS and HWID (horizontal position and width).

The procedure is illustrated in service manual at page 13.

To download service manual, click here and choose Get Manual in the page that will open.

Posted on Sep 07, 2010

  • Ginko
    Ginko Sep 07, 2010

    Hi.

    You are welcome.

    All the best.

    Ginko.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anyone have problems with Panasonic TC-P60ST30 with white fuzzy picture mal-function?


Try going into set up menu and look for a screen degauzing function or try setting the screen temp. to warmer or cooler.

Aug 11, 2017 | Panasonic Viera Plasma TV TC-P60ST30

1 Answer

Panasonic CT-27G14A


Have you tryed both the front and the back inputs?

May 17, 2008 | Panasonic CT-27SL15 27" TV

1 Answer

I have a Panasonic TV CT-34WX50 every time I change channels


it sounds that have problem in the chroma board ( video board ) a small board that hooked up in the neck of the picture tube. if the color is greenish the cause is dead in red video driver transistor or open resistance. hope this can help good luck.

Jul 26, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

I have a old tv 36 inch panasonic ct-36d30 my tv


sound like yoke short problem. replace same yoke as possible . good luck!

Feb 15, 2010 | Panasonic CT-36D32 36" TV

1 Answer

Panasonic CT-32g19j


check The B+ of your tv. If no b+ Check the input AC voltage. If Ac i/p are ok but no B+ Volt maybe your IC in power supply has problem.

Jun 01, 2009 | Panasonic CT-32SL14 32" TV

1 Answer

Power just quit had a great picture


panasonic tv's suffered from frame chip problems causing them to be stuck in stand by .not an expensive part though...

Apr 25, 2009 | Panasonic CT-32SL14 32" TV

1 Answer

I need Panasonic CT36SL14 service manual


tv powers up but no picture or sound. DVD works great has great picture and sound.

Apr 02, 2009 | Panasonic CT-36SL14 36" TV

1 Answer

1990 Panasonic 33T86S


the horizontal section is the trouble of your tv, replace the horizontal output transistor

Dec 31, 2007 | Panasonic CT-36HL43 36" TV

1 Answer

Picture on Panasonic tv intermittently becomes striated and bottom half of picture shows on top half of screen


Hello! What you're describing sounds like a vertical deflection problem if it also occurs when you're watching a TV program. This type of trouble is a component failing in the vertical circuit of your set. A loose solder connection could cause this. On the other hand, if it just happens when you run the VCR, your problem could be somewhere in the tape drive mechanism or possibly a bad tape. Things like slipping clutches,bad belts sticking guide rollers are a few things that will cause this in a VCR. You need to have a tech check it for you. Hope this gives you some help. Stargazer

Feb 03, 2007 | Panasonic CT-34WX54 34" TV

1 Answer

Black border


u are have a horizontal problem. seek pros help

Dec 25, 2006 | Panasonic CT-36G34 36" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74198 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...