Question about Juicelady JL500 Juice Extractor

1 Answer

Juice lady My juice lady is burning the plastic "ring like" lid that fits over the basket. Can you help?

Posted by on

  • Anonymous Nov 20, 2008

    My juice lady is burning the plastic "ring like" lid that fits over the basket. Can you help?



    It also doesn't seem to fix on properly. The last time I used it it started shredding the plastic part that pushes the fruit into the mixer....



    PLease help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the stainless steel basket notice a notch cut out on the rim above the spout and an indentation on the back of the basket near the rim. The plastic ring must snap on to the steel basket before placing the assembly on the motor housing. If it does not snap on, it is not fully seated. After the ring is seated and on the motor base, push the basket on and spin it. Confirm that the basket clears the ring. Place the top cover with feed tube over the unit and lock the two clips down. This procedure should solve your problem.

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The pulp is quite wet after juicing 2 cups juice. Can you pinpoint the reason?


Let it spin for a 2 or three minutes after juicing. You
can also, slowly, pour a little water down the chute to
leach out more juice and dilute it as well. Also hold
the basket up to the light to see if some of the holes
have become clogged and use a tooth brush to clear
them. If you're using the filters, just rely on the basket
alone, it's not that hard to clean.

Jan 26, 2011 | Acme 6001 Juice Extractor

1 Answer

Hi I have an older acme supreme juicerator, model # 11je23. Do the newer baskets & lids fit this older model? Or can a guy get original parts?


Believe the basket is the same. The newer lids have a flange
around them which can be filed down. Takes time, but file away
tapering it until it fits in the juice bowl. With a new lid you may
have to adjust the chute to blade gap. On bottom loosen center
locking nut and turn adjusting screw clockwise until chute contacts
blade, then back it off a half turn and lock it down. A few older lids
are around, but it's hit and miss.

Nov 05, 2010 | Acme 6001 Juice Extractor

1 Answer

Need instructions on how to use the Acme 6001 Juicerator.


Call Waring at 1800 492 7464, they may be able to help you out. There is not
a whole lot involved here. Place the juice bowl on the base first, then the basket,
blade, secure with the clutch nut and rotate the cover to lock it in place. Watch
out they vibrate, so juice hard produce evenly and slowly.

Oct 02, 2010 | Acme 6001 Juice Extractor

1 Answer

I am looking for parts for the Acme 6001 Juice


Just google Acme juicer parts. The new lids are a tight fit and
have to be filed down if you're handy.

May 11, 2010 | Acme 6001 Juice Extractor

1 Answer

HOw do i clean it?


flip down the lever to pull it all apart.

rinse out the lid, food pusher and base(that the mesh filter sits in).

scrub out the mesh filter with a dish brush or the included brush if you have it. be carefull the grater-like parts at the base are very sharp. make sure it's clean by holding it up to the light. if there are any particles left clinging to the mesh it will seriously interfere with the effectiveness of your juicing.

you can line the pulp collecting jug with a plastic bag so that you dont have to clean that out as well.

it's best to clean everything immediately. if for some reason you can't, at least rinse the plastic parts and leave the mesh basket to soak until you can get back to it.

if you have any dried food or staining on any of the parts then a soak in water with lemon juice in it (maybe the juice of 3 or 4 lemons) should help soften up particles and strip away stains.

hope this helps....

:)

Jan 09, 2010 | Breville JE900 Juicer

3 Answers

Unable to take juiceman apart to clean


Generally you will have good luck with this item - however after using it for a while here is the problem people are stating in other reviews. You cannot get the basket our for cleaning. Unfortunately there are no instructions or troubleshooting or anything on the manufacturer's website for fixing this..

Here's the problem...There are 3 little captured balls on the basket that engage into holes into the juicer to hold it into place when you load it. The problem is that over time - the balls get juice in them. Then you store the thing with the basket locked into the juicer. Then from sitting in your cupboard - the juice dries and the balls are stuck. When they get very sticky they do not float in their cavity they are stuck. Then after you juice the next time - you cannot get basket off. basket is stuck and you will destroy the juicer if you try to pry it out with excessive force.
If you have this problem and you are lucky enough to be reading this - I have figured out the fix on my own...

You need to fill up a large tupperware, rubbermaid, whatever - bowl about 3 inches deep with hot water. Then take the juicer with the clear cover off and flip it upside down and into the hot water. Make sure the water is covering the entire basket area, but not so deep it goes into the motor area. I let it soak for about 3 hours, but I don't think you will need to do it for that long. When I took it out of the water I was able to pry the basket out with very little force. This is when I discovered this flawed design with the balls.

I used it probably for a year or so about 40 or 50 times without this issue, but let it sit for about 4 months - which is why I believe it caused these balls with juice in them to get so frozen I couldn't remove it.

Good luck. It worked for me.. this should work for you!

Tom

Jan 25, 2009 | Salton JM411 Juiceman II Elite Juicer

1 Answer

Pulp galore!


are you exceeding the capacity of the juicer? you will get about 2 and 1/2 large glasses of juice before the pulp fills the spinning basket. Apple peels are very tough, apples and tomatoes need to be peeled before juicing. Use the filters, the juice comes out much clearer and the juicer is easier to clean up. I so a lot of carrots, carrots are super food.

Nov 21, 2008 | Acme 6001 Juice Extractor

2 Answers

Juicelady JL500 parts


Order Juice Lady replacement parts at 800-233-9054

Jul 21, 2008 | Juicelady JL500 Juice Extractor

1 Answer

Using the Citrus Attachment


CALL WARING AT 800 492 7464. MAY BE
SOME TYPE OF SAFETY CUT OFF. YOU
MIGHT ACTUALLY HAVE TO ATTEMPT
JUICING AN ORANGE OR SO WITH THE
NEWER MACHINES.

Jun 25, 2008 | Acme 5001 Supreme Juicerator Juice...

2 Answers

Parts


call 800-233-9054

Mar 02, 2008 | Juicelady JL500 Juice Extractor

Not finding what you are looking for?
Juicelady JL500 Juice Extractor Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juicelady Juicers Experts

kakima

Level 3 Expert

102366 Answers

Tom Chichester

Level 3 Expert

30610 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Juicelady Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...