Question about Samsung Manual Inflate Blood Pressure Monitor

1 Answer

I have a sbm500s blood pressure machine,had it for the last ten years and it is not inflating properly-changed the batteries and check pipes

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

VERY impressed for the age of the machine, mine is 6 years, that is about the longest I can keep mine alive, but I am a nurse and they go quick I suppose. Anyway, to address your issue, put the cuff on, turn it on and let it pump up, but, make sure you are in a VERY quiet area and also NO draft. Sprinkle a SMALL smount, just lightly dusting of baby powder on the line from the cuff to the monitor, check for any blowing of the powder, if you see it, the line is bad, if not, your machine might need to be calibrated, some of them cost more to do this than to simply replace the machine. Good luck and let me know if you need more help, glad to be of assistance. Guy

Posted on Sep 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I inflate my blood pressure device it is a CVS model BM 35


Here is a link to the manual. You simply put on the cuff, then press the POWER ON button to take the reading. The cuff should inflate automatically and take the measurement. If it is not working properly, ensure that the batteries are correctly installed and that they are not depleted.
https://www.beurer.com/web/we-dokumente/gebrauchsanweisungen/GA_USA/753.902_1012_BM35_CVS.pdf

Dec 30, 2015 | Health & Beauty

1 Answer

Cuff doesn't inflate lifesource ua767 bp monitor. How do I reset or fix this? Have brand new batteries.


Inflating a Blood Pressure Cuff - YouTube

? 1:01
www.youtube.com/watch?v=8e6qtnHa8ps
Sep 30, 2008 - Uploaded by expertvillage When you take a blood pressure reading it is important to inflatethe blood pressure cuff until you no longer ...

Sep 24, 2015 | Lifesource Health & Beauty

1 Answer

My blood pressure machine keeps giving me an error 3 it is a cvs brand


Several of the CVS brand blood pressure monitors are made by MicroLife USA. For those models, the Error 3 indicates that you may have been moving your arm while the unit was obtaining the readings. You need to repeat the measurement while staying still.

The other possible cause of the error are that the cuff didn't inflate in a reasonable length of time. Check that the cuff is properly placed on your arm. Also make sure that the inflation hose is tightly connected to the cuff socket on the unit.

I hope this helps.

Cindy Wells

Aug 14, 2014 | Health & Beauty

1 Answer

An "E" Readin


E is cuff not applied correctly
EE is cuff not inflated properly

E
E
over each other is too much inflation if inflated manually

See page 25 of the manual.

You both need to sit down and read the instruction manual :>)

instruction manual - Omron

https://omronhealthcare.com.au/pdf/SEM-1_Instruction_manual.pdfThe SEM-1 Automatic Blood Pressure Monitor is intended for home use. SAVE THESE ... If the battery fluid should get in your eyes, immediately rinse with plenty of .... These situations could lead to higher blood pressure reading due to strain or the arm cuff ... If an error symbol "E" or "EE" appears, measurement was not.

https://omronhealthcare.com.au/pdf/SEM-1_Instruction_manual.pdf

Nov 06, 2017 | Walgreens Blood Pressure And Pulse Monitor

1 Answer

No power


You must have not put the battery properly. Please check it again. The Omron HEM should work if the battery is OK. Also check if the device has any other problem.

Jul 10, 2012 | Omron Model HEM 432C Manual Inflation...

1 Answer

The cuff is inflating but is taking a long time to deflate and cutting off the circulation. can this be rectified?


hello
Usually in blood pressure apparatus these type of problems are very common. So do not worry.
Actually when you inflate the cuff the pressure goes into the pipe then unscrewing(mercury bp apparatus) or diflating (digital or manual apparatus) the cuff can release the air. There may be two possibilities that why the your equip is not difflating.
1. either there is a blockage in diflating Knob
2 Or in the pipe
The easiest way is to clean the piping by yourself or take it to the nearest medical appliance store, he will clean it for you.
Good day

Mar 01, 2011 | Timex Health & Beauty

1 Answer

Wont inflate


Have you changed the batteries, recently? If not that may be the problem. Most of the Walgreens brand Blood Pressure Monitors are manufactured by HoMedics and have 5 year limited warranty. Check you Owners Manual's "Trouble Shooting Guide" for how to change the 2 batteries and warranty details.

Jan 25, 2011 | Walgreens Health & Beauty

1 Answer

The Sunbeam blood pressure kit doesn't inflate the cuff.


You have the same problem I do. The hose socket to the machine is broken.

Jul 10, 2010 | Sunbeam Digital Blood Pressure Monitor

1 Answer

Err 3 is displayed


Wrist blood pressure monitors must be used with the arm above heart level. You can do the pledge of allegiance while doing a reading to make sure this is done. Usually this error occurs when inflation takes too long or the placement of cuff is wrong.

Sep 10, 2009 | Walgreens Wrist Blood Pressure Monitor

1 Answer

I have a mabis 04-203-001 and it SEEMS it never registers the systolic pressure...it never tells me to stop inflating and deflate.....it endlessly tells me to keep adding pressure - too much, I'm sure! and...


You must inflate far enough to stop blood flow, or the machine can not sense the systalic pressure. I suggest that you have your blood pressure checked. It looks like it my be HIGH!

Jan 11, 2009 | Mabis Manual Digital Blood Pressure...

Not finding what you are looking for?
Samsung Manual Inflate Blood Pressure Monitor Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Health & Beauty Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Md Fazlurrahman
Md Fazlurrahman

Level 1 Expert

23 Answers

Joe Ball
Joe Ball

Level 3 Expert

586 Answers

Are you a Samsung Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...