Question about Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dish Remote
your dish network remote does not have codes for an olevia tv, the best you can do is use the powerscan mode. here are the steps.
1)Turn ON the electronic device you want to program the remote to control.
2)Press the Mode button on the remote until the appropriate mode light is flashing.
3)Press the Address button. The mode light will start flashing slowly.
4)Press the Power button. The mode light will stop flashing and stay lit.
5)Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
6)When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.
7)Press the Address button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
8)Turn the device back ON by pressing the Power button.
9)Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
10)If the other buttons work, follow the current settings procedure below to determine the current remote settings.
11)If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
12)The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.
1)Press the Mode button on the remote until the appropriate mode light is flashing.
2)Rapidly press the Address button twice.
For the SAT mode, the mode light will flash the number of time that matches the receiver address.
3)For the TV, VCR, and AUX modes, the mode light will flash the number of times to indicate each digit of the current code. There will be a pause between the flash sequences for the digits. A quick flash indicates zero.
4)Write all of the codes you programmed on to the sticker that came with your satellite receiver and apply the sticker to the inside of the remote battery cover.
hope this helps,
Posted on Nov 16, 2007
Tips for a great answer:
Dec 02, 2010 | Olevia Televison & Video
Jun 06, 2010 | Syntax LT30HV 30 in. HD-Ready LCD...
Sep 22, 2009 | Insignia 37" LCD Flat-Panel HDTV
Sep 13, 2009 | Syntax LT26HVE 26 in. HD-Ready LCD...
Aug 15, 2009 | Insignia 37" LCD Flat-Panel HDTV
Aug 07, 2009 | Televison & Video
Jun 02, 2009 | Syntax Olevia 226T 26 in. LCD Television
May 23, 2009 | Syntax Olevia 537H Television
Dec 24, 2007 | Olevia LT37HVS 37 in. LCD HDTV
Nov 24, 2017 | Samsung Televison & Video
129 people viewed this question
Usually answered in minutes!