Question about Computers & Internet

Open Question

How do set this hard drive: 80G, 7200RPM 60G, Hitachi-VAN2 to master? Where does the jumper go?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: maxtor 40gb hard drive

i think it's a conflict with the two hard drives maxtor (ata) and westen dig(eide) ,.....could be wrong....maxtor 40gb....west,260gb let me know

Posted on Sep 17, 2007

raevenzero
  • 53 Answers

SOURCE: Maxtor 52049U4 20GB hard drive jumper settings

There should be a diagram showing how you should set the jumper. Set it according to what you want it to be and it should begin to should up. You can set it as Master, Slave, or Cable Select.

Posted on Nov 12, 2007

Crystal K
  • 3 Answers

SOURCE: jumper switch settings

I have the same thing and here is your solution.
http://www.babooforum.com.br/idealbb/files/152532-Maxtor2.jpg

Worked perfect for me afterwards. :)

Posted on Apr 19, 2009

frcs68
  • 1605 Answers

SOURCE: jumpers guide Maxtor 2B020H1 20Gb Slim IDE 3.5'' Hard Drive

Maxtor jumper as follow:
looking at the connector top row 5 pins, buttom row 4 pins.
the single pin on the top row is index pin.
master jumper is located between top 2nd pin and 1st buttom, counting from the left.
slave has no jumper on any of the pins.
cable select jumper is located between top 4th and buttom 3rd pin. counting from the left.

Posted on Apr 24, 2009

  • 173 Answers

SOURCE: jumper setting

ok

check your ide connectin that blue end of ide cable always at motherbord .also check that your ide cable is working properly.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

S.smith1@hotmail.co.uk How do I slave HDT721050SLA360 500GB 7200rpm


if you want to set a master / slave on you computer
During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to IDE-1 means Pri slave escape then press f10 to save to cmos to restart
you will have to have master with slave set up
you can find the jumper location next to the power on a hard drive and the settings for plastic jumper location is usually printed on the top of a hard drive
IDE-0 means Pri master
IDE-1 means Pri slave
IDE-2 means Sec master
IDE-3 means Sec slave


single or master :::::
master with slave ::'::
slave :::':
note the plastic jumper is

Aug 26, 2011 | Hitachi Deskstar 7K1000B HDT721050SLA360...

2 Answers

How to set jumpers on a hitachi hard drive


iamaraldite.gif

Use the above diagram to set the HDD in the required mode.
For more details on Master and Slave modes please use the below link
http://www.ehow.com/how_6031_change-master-slave-designation.html

Aug 18, 2011 | Computers & Internet

1 Answer

Putting this drive in a dell, I,m Not familiar With the Jumper settings,SSC,PM2, Opt 1, opt2, i,m use to CS, Slave,Master ETC


http://wdc.custhelp.com/app/answers/detail/a_id/1400#jumper

http://www.overclock.net/faqs/99291-info-what-ssc-jumper-my-hard.html

Jun 09, 2011 | Western Digital WD2500JS 250GB SATA2...

1 Answer

I have a Deskstar 80GB hard drive and I am adding another drive to the computer. How do I set the Deskstar to the Master. I'm not sure what the pin settings should be?


If you have the EIDE cables on your PC, it is easy. Your drives need to have their jumpers in the CBL SEL (cable select) positions (identified on the case on the sticker) and then you simply connect your Deskstar to the Master connector, and your other drive to the Slave connector.

Feb 12, 2011 | Hitachi 80GB IDE Hitechi DeskStar 7K160...

1 Answer

Put it in my computer as extra space for music and my computer isnt reading it for me to open to put anything in it


Hi,

Have you checked the jumper settings of your hard drive. If you are running it on the same IDE cable as your master drive then you need to set up your Hitachi's jumpers as a 'slave' drive.
More often than not there are diagrams on the hard drive sticker to explain this configuration.
If these settings are as they should be and your system is still not detecting the drive make sure the hard drive is spinning by listening for a sound coming from it. If this is fine then chances are good that your drive has blown and not worth repairing.

Let me know if you need any further assistance.

Best wishes,
Graemevm

Jan 16, 2011 | Hitachi 80GB IDE Hitechi DeskStar 7K160...

2 Answers

Slave jumper setting


SATA drives don't have jumper settings.

You can set master/slave in BIOS.

Mar 29, 2009 | Seagate 500GB Maxtor Diamondmax21 SATA2...

2 Answers

Slave pin settings


hi frined

remove your hard disk jumper & u r hard will be slave

Apr 12, 2008 | Maxtor 20.4GB 7200rpm ATA-100 HDD p/n...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...