Question about Maytag MMV4205 Microwave Oven

2 Answers

I need to replace just the door handle on a Maytag Microwave (Model No. MMV4205BAS). All I've seen online for parts is a complete new door for anywhere from $220 to $300. Surely there is a cheaper solution.

Posted by on

  • Michael J. Marian Sep 21, 2012

    I was able to replace JUST the door handle thanks to the advice of William Miller above. It was a rather simple fix once I had the handle. I've had no problems since.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 9,047 Answers

The handles run about $25-35 here.

Here are the part numbers & descriptions:

W10279351 Black handle
W10279353 White handle
W10279355 Bisque handle

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Sep 08, 2010

Testimonial: "I've ordered the replacement part. Thanks for the help! Very much appreciated."

  • beautyshilp
    beautyshilp Jan 03, 2013

    Can you provide specific details on how to replace the handle only? Also, the link that you listed doesn't seem to have the part for Black Model anymore.

  • Anonymous Jan 17, 2017

    I just replaced the door handle on my MMV4205BAS for $12.40 + shipping and it fit perfectly. It took me 10 min to watch a video on how to remove the molding when replacing the latch. Once the molding is half way off you can get at the door handle screws. I replaced the handle with RepairClinic Item #2085860 | Samsung OEM Part #DE94-01358A. There is a top and bottom to the handle so flip it around if it does not line up and screw in in then snap the molding back in place.website is repairclinic.com

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same problem. on the website they said that you have to replace the whole door on this model. were you able to just replace the door handle?

Posted on Sep 21, 2012

  • annho32
    annho32 Sep 21, 2012

    i have the same problem. on the website they said that you have to replace the whole door on this model. were you able to just replace the door handle?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Maytag Microwave Model MMV5207BAB. The door handle broke off and I would like to replace it. What parts do I need to buy?


The support page for model MMV5207BAB is here. Your exploded view with parts list is here.

The service manual is here, and it will you important safety and disassembly information.

Unfortunately, the door handle is not available separately. You would have to order the entire door assembly.

It is part number DE94-01381J and it runs $106.99 from Sears here. (prices subject to change)

William E. Miller
http://www.MicrowaveControl.com
Microwave Oven Control Panel Repair Nationwide
"Recycling by repairing since 1982"

Jan 15, 2017 | Maytag Microwave Ovens

1 Answer

MVP V door handle broken


Maytag mvp v microwave door handle parts Questions ...

www.fixya.com > Forum > Tags > mvp v microwave door handle parts
Maytag mvp v microwave door handle parts related problems. Ask your Maytag mvp v... The handle on my maytag microwave oven broke off ... door handle ...

Maytag Microwave Handle Parts from RepairClinic.com

www.repairclinic.com/Shop-For-Parts/.../Maytag-Microwave-Handle-Par...
Shop for your Maytag Microwave Handle from our huge inventory. Return any part for any ... Repair Help for Microwaves .... Microwave Oven Door Handle.

CMV1000ADW Maytag Microwave Parts and Repair Help

www.partselect.com/Models/CMV1000ADW/

Dec 22, 2015 | Microwave Ovens

1 Answer

How can I view installation Instructions on a Maytag over the range microwave MMV4205BA


It depends on your full model number:
You can find helpful exploded view diagrams and order parts and accessories by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 17, 2010 | Maytag Microwave Ovens

1 Answer

I need a new door for this microwave. I have been looking online for hours and can't find just the door. Can anybody give me a website that sells just the door for this micro? Thanks....


The door is available at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

If the model number you listed this question under is correct, the part number for the ENTIRE door is WB56X10585.

Is there a reason for replacing the entire door? You can purchase individual replacement parts if only a single part on the door is broken. The first three sites on the list have helpful exploded view diagrams to assist you in locating and properly identifying the parts you may need.

The most common thing that fails on these doors is the door handle. If only the handle is broken, the door handle can easily be replaced on most microwave ovens by removing the inner door panel that goes around the perimeter of the glass. The following link explains how to access and replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

The average cost for a replacement handle usually averages about $20 - $40. Replacements may be purchased at the websites listed in the link I provided.
The part numbers for the handle on this model are (2 pieces):

WB15X10119
WB15X10120

If you have any questions, please post back with your and let me know. I hope this helps you

May 31, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Need new handle on door


The door handle can easily be replaced on most microwave ovens by removing the inner door panel that goes around the perimeter of the glass. The following link explains how to access and replace the door handle:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement

The average cost for a replacement handle usually averages about $20 - $40. Replacements may be purchased at the websites listed in the link I provided. If the model number you have this question listed under is correct, the part number for a replacement handle is 46-114897-3.

If you have any questions, please post back with your complete model number (if different than the one listed) and let me know. I hope this helps you.

Mar 12, 2010 | Sharp R-1750 Microwave Oven

1 Answer

The handle on my maytag microwave oven broke off at the bottom. How do I replace ? Model MMV5165BA


The door handle can easily be replaced without the assistance of a repairman. This is a common problem with some microwave oven doors.

This is not difficult. To access the door handle mounting screws on MOST microwave ovens, you have to remove the inner door panel that goes around the perimeter of the glass. You can use a small screwdriver to carefully pry the plastic up and work your way slowly around the perimiter of the glass. Most microwave ovens also have grooves in the panel that you can insert the screwdriver into. Use care not to pry against the glass. The glass is tempered and also has an RF shield that prevents harmful microwaves from potentially harming the consumer. If you break the glass, you will need to purchase a new door.

The door handle screws are located behind the inner panel. Simply remove the broken handle and install the new one. Re-insert the inner door panel carefully and gradually work your way around the perimeter of the door glass and make sure it snaps back into place.

Replacement parts can be found at any of the following sites:

appliancepartspros.com
searspartsdirect.com
pcappliancerepair.com
repairclinic.com

I hope this helps you.

Aug 12, 2009 | Maytag Appliances Over-the-Range Microwave...

1 Answer

How do I mount a maytag mmv4205bas microwave? I bought a floormodel and they did not have the template.


Go to this website:
http://www.servicematters.com/maytag_library/html/index.html

-Once there click the link at the top "Literature by Model"
-Now enter your model number "MMV4205BAS" and hit enter or "go"
-On the page click your model number
-Click on the first row or the row containing the Document Type of Service Manual
-On page 51 of that PDF you will see the installation instructions for your microwave.

Apr 09, 2009 | Maytag MMV4205 Microwave Oven

2 Answers

Replacing door handle


.
The choke cover (or door gasket on your brand) will come out similar to the diagram shown below.

Then the hidden screws should be visible.

Also, you can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

348d386.jpg

Oct 20, 2007 | Maytag MMV5156AAS Microwave Oven

Not finding what you are looking for?
Maytag MMV4205  Microwave Oven Logo

1,445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...