Question about One For All URC4220 Remote Control

1 Answer

None of them worked

Tried them all before asking for further assistance, what do i do?

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. -You can rate this solution with one of four votes, if you feel your issue is resolved (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 17, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 7 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

RCA flatscreen remote doesn't work


\its most likely the ir sensor which has the issue. I will need the model number of your set to help you further on the issue. You can reply to this same post for further assistance if needed.

Jan 01, 2013 | Televison & Video

1 Answer

Need the codes to program dishnetwork remote to work the zenith converter box


Hey there marlastewart!

I can definitely assist you in getting the codes for that. You can view this link http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx to search for codes based on the equipment and brand.

If none of the codes work let me know and I can try further troubleshooting with the remote!

Tommy Faust
DISH Internet Response Team

Jan 05, 2012 | DISH Network IR Remote Control

1 Answer

On runescape get to page to select worlds then when i try to open says explorer found problem and wont let it open


There may be several things that happened due to the complexity of the Java applet on the runescape web page. I'll post a few potential solutions to address your issue.

  • It may be a rare issue with your specific web browser. Solution: Try a new web browser to see if it fixes the problem. Two solid (and popular ) alternatives are chrome and firefox.

  • If that doesn't work, you may have need to clear your cookies, cache, etc. Solution: some web browsers have built in tools that can help you out with this. But my personal favorite is CCleaner. CCleaner is a free software that cleans your computer for you.
  • If none of the above work, try asking for further assistance on the official Runecape forums for support. There is a great community there who have dealt with many similar problems and would be glad to help.

Dec 31, 2010 | Microsoft Windows Vista Home Basic Edition...

1 Answer

My tv says no signal. My other 3 tvs work just fine. The tv worked this morning just fine when i turned it off. What changed? Have read all these answers to problems but none have fixed my tv.


Hello, Nick Franta with DISH Network Customer Support here.

Checking to make sure this issue has been resolved. If not, try unplugging the receiver that specific television is connected to for 10 seconds.

If you need any further assistance let us know!

Dec 12, 2010 | DISH Network 322 DTV Receiver

1 Answer

Inverted print on lexmark t642


Is the problem present when printing the Menu Settings page? Here's the link on how to print the Menu Settings page: http://bit.ly/9TEP7f. This may also be just a configuration or a setting in the application. This problem normally needs further probing to find the resolution. I would suggest you contact Lexmark Technical Support for further assistance.

May 25, 2010 | Lexmark T642tn Printer

1 Answer

How do you install the starter motor on a falcon au. if this doesn't work wat could be the other problems on why the car wont start


you can bypass and test starter motor before hand check battery /wiring /fuses/some times a Little tap on starter will git it going if that works it is most likely starter motor / there should also be a starter solenoid that you can use to do the bypass/git a repair manual/ here or at your local library.feel free to ask if you need any further assistance/ please let us know how much mechanical experience you have / some / allot/ none.? we want to help you git it fixed safely.

Apr 10, 2010 | Ford Futura Cars & Trucks

1 Answer

Turn signals wont work, all other lights work. turn signals wont turn on. 1984 Military Chevy Blazer


The element are serpent in the lights bulb the turn signal and brake usually share the same one but the running or park light are not shared with the turn . so if none of the light for the turn signal light then you will want to look for your flasher control it is ether in or near the fuse box or under dash by steering wheel shaft,,you should also check grounds at light socket if we can be of any further assistance please feel free to ask hope this gives you a place to start .Thank You..

Mar 30, 2010 | 1984 Chevrolet Blazer

1 Answer

Default username & password after hard reset


Username:[none]
Password:Cisco or
:root
:Cisco or
:Cisco
:Cisco
Try from above 3 then you can access cisco router.
Let me know if you need further assistance.
Thanks for using FixYa.

Feb 01, 2010 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

1 Answer

MY WII WILL NOT PLAY MY GAMES IT DOSNT SEEM ABLE TO READ THE GAME I HAVE TRIED CLEANING THE GAMES BUT STILL DOSNT WORK


Was unit dropped? Are games being placed in correctly? If none of these work try unplugging unit and replug after 10sec.

Let us know if we can further assist you, could be lense or drive issue
estimate cost $49-$69.00 with 1yr warranty

Nov 23, 2009 | Nintendo Wii Console

Not finding what you are looking for?
One For All URC4220 Remote Control Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Cindy Wells

Level 3 Expert

4946 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...