An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: Speaker Phone not working - ETW16DC-2
THere is a lot products available on fone that have many facilities like conference,waiting call,msgs etc BUT there is a limitation for each model like this model which you are using ahve maximum of 2 to 5 call in conference at a time so, its may have some probelem with more persones in conference.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have lost system programming. Unless you are well versed in getting into your system with the installer password, you need to call a Nortel service tech. The older systems have a battery backing up the memory and when it dies, your system crashes. It's really obvious, because it goes back to the default of only 2 lines working and all the buttons become defaulted.
You are describing two different things. The "speaker 43" is the default code for Busy/No Anser Set. The correct syntax should be Speaker - 43 - 399 - Speaker. That should set CFWD B/NA to VM. Next, if you have a button programmed to call VM, it is probably a speed-dial or one-touch button. It would have to be programmed to dial 399. If that is not working, try calling VM (399) and make sure you can get into the box that way. If that works, but the button does not, press the Feature Key and the button for VM. It should display what is programmed for that button. If it needs to be changed to call VM, the syntax is: Feature - Redial - the button to program - "1" - "399" - Feature.
Program Thomson Consumer Electronics (GE?) 2-9316A Speaker Phone (what we found works) To program: 1. press speaker or lift handset. 2. press STORE 3. dial the number to be stored 4. press MEMORY DIAL 5. press location (0-9 on keypad or 1 of the 3 emergency quick dial) 6. press speaker or hangup. To dial emergency numbers: 1. press speaker or lift handset. 2. press any of 3 emergency quick dial To dial stored numbers: 1. press speaker or lift handset. 2. press MEMORY DIAL 3. press location (0-9 on keypad)
Does anyone know how to add PAUSE in a stored dial string?